| |
| Issue |
Title |
| |
| Vol 68, No 2 (2025) |
On the influence of rare-earth oxide additives on kinetics of borated layer formation and boron diffusion along grain boundaries during steel boriding |
Abstract
PDF (Rus)
PDF (Eng)
|
|
D. A. Ishmametov, A. S. Pomel’nikova, A. L. Petelin |
| |
| Vol 68, No 2 (2025) |
Initiation of melting at tilt grain boundaries in austenite depending on the misorientation angle |
Abstract
PDF (Rus)
PDF (Eng)
|
|
I. V. Zorya, G. M. Poletaev, Yu. V. Bebikhov, A. S. Semenov |
| |
| Vol 68, No 1 (2025) |
Effect of thermal cycles on formation of pearlitic heat-resistant steel structure under wire arc additive manufacturing |
Abstract
PDF (Rus)
PDF (Eng)
|
|
I. V. Vlasov, A. I. Gordienko, V. M. Semenchuk |
| |
| Vol 68, No 1 (2025) |
Influence of heat treatment on structure, phase composition, hardness and electrical conductivity of VZhL14N-VI nickel superalloy |
Abstract
PDF (Rus)
PDF (Eng)
|
|
A. V. Koltygin, V. E. Bazhenov, A. A. Belova, A. V. Sannikov, A. A. Lyskovich, V. D. Belov, E. Yu. Shchedrin |
| |
| Vol 68, No 1 (2025) |
Influence of heat treatment modes on the properties of 56DGNKh (Cu20Ni20Mn2Cr) alloy |
Abstract
PDF (Rus)
PDF (Eng)
|
|
M. Yu. Belomyttsev, M. A. Mikhailov, D. A. Kozlov, A. M. Mikhailov, I. I. Karavatskii |
| |
| Vol 67, No 6 (2024) |
Impact strength and fracture features of 12 % chromium ferritic-martensitic steel EP-823 in temperature range from –196 to 100 °С |
Abstract
PDF (Rus)
PDF (Eng)
|
|
K. V. Spiridonova, I. Yu. Litovchenko, N. A. Polekhina, V. V. Osipova, S. A. Akkuzin, V. M. Chernov |
| |
| Vol 67, No 6 (2024) |
Structural-phase state and properties of 56GM/(W + WC(Ni)) composite alloy obtained by wire electron beam additive manufacturing |
Abstract
PDF (Rus)
PDF (Eng)
|
|
A. V. Nikonenko, A. V. Vorontsov, N. N. Shamarin, V. R. Utyaganova, N. L. Savchenko, A. P. Zykova |
| |
| Vol 67, No 6 (2024) |
Structural-phase composition and mechanical properties of stainless steel – low carbon steel metal composite |
Abstract
PDF (Rus)
PDF (Eng)
|
|
V. I. Danilov, D. V. Orlova, G. V. Shlyakhova, Yu. P. Mironov, E. D. Petrova |
| |
| Vol 67, No 6 (2024) |
Structure and properties of coatings obtained by gas-thermal spraying |
Abstract
PDF (Rus)
PDF (Eng)
|
|
A. V. Kolubaev, O. V. Sizova |
| |
| Vol 67, No 6 (2024) |
Inhomogeneity of deformation of surfaced stainless steel |
Abstract
PDF (Rus)
PDF (Eng)
|
|
S. P. Buyakova, K. N. Kayurov, S. A. Barannikova |
| |
| Vol 67, No 6 (2024) |
Effect of 3D printing mode on structure and fatigue strength of 30CrMnSi steel |
Abstract
PDF (Rus)
PDF (Eng)
|
|
S. A. Mantserov, M. S. Anosov, Yu. S. Mordovina, M. A. Chernigin |
| |
| Vol 67, No 5 (2024) |
Formation of non-metallic inclusions in production of 08Kh18N10T corrosion-resistant steel |
Abstract
PDF (Eng)
PDF (Rus)
|
|
A. Yu. Em, O. A. Komolova, K. V. Grigorovich, S. B. Rumyantseva |
| |
| Vol 67, No 5 (2024) |
Deformation and fracture of heat treated ribbon of amorphous Co – Fe – Cr – Si – B alloy during indentation |
Abstract
PDF (Eng)
PDF (Rus)
|
|
I. E. Permyakova, M. V. Kostina |
| |
| Vol 67, No 5 (2024) |
Structural-phase states and properties of high-speed surfacing after tempering and electron beam processing |
Abstract
PDF (Eng)
PDF (Rus)
|
|
V. E. Gromov, A. S. Chapaikin, L. P. Bashchenko |
| |
| Vol 67, No 5 (2024) |
Simulation of structural changes in metal under high-intensity external influence |
Abstract
PDF (Rus)
PDF (Eng)
|
|
A. N. Gostevskaya, A. V. Markidonov, M. D. Starostenkov, D. A. Lubyanoi |
| |
| Vol 67, No 4 (2024) |
Low-cycle fatigue of welded joint from steel of X70 strength class |
Abstract
PDF (Rus)
PDF (Eng)
|
|
A. A. Galkin, Yu. G. Kabaldin, Yu. S. Mordovina, M. S. Anosov |
| |
| Vol 67, No 4 (2024) |
Influence of inhomogeneities in chemical composition and porosity of sintered steel on development of martensitic transformation |
Abstract
PDF (Rus)
PDF (Eng)
|
|
V. N. Pustovoit, Yu. V. Dolgachev, M. S. Egorov, Yu. M. Vernigorov |
| |
| Vol 67, No 4 (2024) |
Physics of hardening of the rolling surface of rail head from hypereutectoid steel after operation |
Abstract
PDF (Rus)
PDF (Eng)
|
|
N. A. Popova, V. E. Gromov, A. B. Yur’ev, E. A. Martusevich, M. A. Porfir’ev |
| |
| Vol 67, No 4 (2024) |
Effect of electric arc surfacing on the structure and properties of coatings |
Abstract
PDF (Rus)
PDF (Eng)
|
|
G. V. Shlyakhova, V. I. Danilov |
| |
| Vol 67, No 4 (2024) |
Molecular dynamics study of the influence of carbon impurity on austenite nanoparticles crystallization during rapid cooling |
Abstract
PDF (Rus)
PDF (Eng)
|
|
I. V. Zorya, G. M. Poletaev, Yu. V. Bebikhov, A. S. Semenov |
| |
| Vol 67, No 4 (2024) |
Phase composition and microstructure of intermetallic alloys obtained using electron-beam additive manufacturing |
Abstract
PDF (Rus)
PDF (Eng)
|
|
S. V. Astafurov, E. V. Mel’nikov, E. G. Astafurova, E. A. Kolubaev |
| |
| Vol 67, No 4 (2024) |
Complex electron-ion-plasma surface modification of high-alloy stainless steel |
Abstract
PDF (Rus)
PDF (Eng)
|
|
Yu. F. Ivanov, E. A. Petrikova, A. D. Teresov, I. V. Lopatin, O. S. Tolkachev |
| |
| Vol 67, No 4 (2024) |
Gradient of microhardness in the contact zone coating (HEA CoCrFeNiMn) – substrate (alloy 5083) |
Abstract
PDF (Rus)
PDF (Eng)
|
|
M. O. Efimov, I. A. Panchenko, Yu. A. Shlyarova |
| |
| Vol 67, No 3 (2024) |
Ways to improve the properties of high-entropy alloys Cantor CoCrFeNiMn and CoCrFeNiAl |
Abstract
PDF (Rus)
PDF (Eng)
|
|
V. E. Gromov, S. V. Konovalov, M. O. Efimov, I. A. Panchenko, V. V. Shlyarov |
| |
| Vol 67, No 3 (2024) |
Calculations of phase composition of austenitic high-nitrogen welding wire and study of a welded joint made from it |
Abstract
PDF (Rus)
PDF (Eng)
|
|
V. S. Kostina, M. V. Kostina, D. V. Zinoveev, A. E. Kudryashov |
| |
| Vol 67, No 3 (2024) |
Effect of heat treatment on structure of austenitic steel 07Cr25Ni13 obtained by WAAM |
Abstract
PDF (Rus)
PDF (Eng)
|
|
M. S. Anosov, S. A. Sorokina, M. A. Chernigin, Yu. S. Mordovina |
| |
| Vol 67, No 3 (2024) |
Grain boundary migration and mechanical properties altering in Fe – 10Ni – 20Cr alloy under irradiation |
Abstract
PDF (Rus)
PDF (Eng)
|
|
D. S. Kryzhevich, A. V. Korchuganov, K. P. Zolnikov |
| |
| Vol 67, No 3 (2024) |
Nitrogen diffusion along the layer boundaries after nitriding of multilayer materials |
Abstract
PDF (Rus)
PDF (Eng)
|
|
K. B. Polikevich, A. L. Petelin, A. I. Plokhikh, L. P. Fomina |
| |
| Vol 67, No 3 (2024) |
Kinetics of deformation fronts during serrated Lüders deformation in α-iron at high temperature |
Abstract
PDF (Rus)
PDF (Eng)
|
|
D. V. Orlova, V. I. Danilov, V. V. Gorbatenko, L. V. Danilova, A. V. Bochkareva |
| |
| Vol 67, No 2 (2024) |
Effect of heat treatment modes on structure and properties of 08Kh18N6AG10S steel |
Abstract
PDF (Rus)
PDF (Eng)
|
|
A. I. Gordienko, E. V. Abdulmenova, T. V. Kozlova, Yu. F. Gomorova, I. V. Vlasov, I. A. Fotin, K. N. Kayurov, S. P. Buyakova |
| |
| Vol 67, No 2 (2024) |
Internal stresses and their sources in steels with BCC lattice |
Abstract
PDF (Rus)
PDF (Eng)
|
|
N. A. Popova, E. L. Nikonenko, M. A. Porfir’ev, R. E. Kryukov |
| |
| Vol 67, No 2 (2024) |
Evolution of dislocation structure and phase composition of deformed Al0.3CoCrFeNi high-entropy alloy during heating |
Abstract
PDF (Rus)
PDF (Eng)
|
|
I. V. Ivanov, S. A. Akkuzin, D. E. Safarova, I. Yu. Litovchenko, I. A. Bataev |
| |
| Vol 67, No 2 (2024) |
Formation of the gradient of structural-phase states of high-speed steel during surfacing. Part 2. The role of the Mullins–Sekerka instability in formation of crystallization structures |
Abstract
PDF (Rus)
PDF (Eng)
|
|
S. A. Nevskii, L. P. Bashchenko, V. E. Gromov, O. A. Peregudov, A. N. Gostevskaya, T. V. Volodin |
| |
| Vol 67, No 1 (2024) |
Effect of hydrogen on steels in hydrogen sulfide-containing and other environments at gas facilities |
Abstract
PDF (Rus)
PDF (Eng)
|
|
R. R. Kantyukov, D. N. Zapevalov, R. K. Vagapov |
| |
| Vol 67, No 1 (2024) |
Improvement of the Cantor alloy’s mechanical properties by alloying with niobium and zirconium |
Abstract
PDF (Rus)
PDF (Eng)
|
|
V. E. Gromov, S. V. Konovalov, M. O. Efimov, I. A. Panchenko, X. Chen |
| |
| Vol 67, No 1 (2024) |
Structure and its defects in additive manufacturing of stainless steels by laser melting and electric arc surfacing |
Abstract
PDF (Rus)
PDF (Eng)
|
|
Yu. G. Kabaldin, M. A. Chernigin |
| |
| Vol 66, No 6 (2023) |
Structure and properties of low-alloy steel 10G2FBYu after rolling in embossed rolls under conditions of electroplasticity |
Abstract
PDF (Rus)
PDF (Eng)
|
|
Yu. I. Pochivalov |
| |
| Vol 66, No 6 (2023) |
Analysis of contact zone of coating-substrate system exposed to irradiation with a pulse electron beam |
Abstract
PDF (Rus)
PDF (Eng)
|
|
M. O. Efimov, Yu. F. Ivanov, V. E. Gromov, Yu. A. Shlyarova, I. A. Panchenko |
| |
| Vol 66, No 6 (2023) |
Lüders and Portevin–Le Chatelier processes in austenitic-martensitic TRIP steel |
Abstract
PDF (Rus)
PDF (Eng)
|
|
V. I. Danilov, D. V. Orlova, V. V. Gorbatenko, L. V. Danilova |
| |
| Vol 66, No 6 (2023) |
Structure and wear characteristics of cast iron after laser surface modification |
Abstract
PDF (Rus)
|
|
S. I. Yares’ko, G. V. Guseva, V. I. Shcherbakov, P. V. Kazakevich |
| |
| 1 - 40 of 270 Items |
1 2 3 4 5 6 7 > >>
|
