CLASSIFICATION OF OBJECTS WITH RECYCLE AND IMPACT ANALYSIS OF MODELS UNCERTAINTY ON EFFECTIVE MANAGEMENT SYSTEMS OF THESE OBJECTS
https://doi.org/10.17073/0368-0797-2015-12-925-931
Abstract
The work is dedicated to the recycle object control. There is a classification of recycle objects with the release of four types: recycle “by the concentration”, “by the weight”, “by the parameters”, as well as “the combined recycle”. For the first three classes of objects the structure of automatic control systems was presented, the analysis of the impact of uncertainty on the performance of the models of these systems was carried out. For recycle objects “by the concentration” the analysis of the automatic control system was done for an object without self-leveling in a straight chain with self-leveling; for the recycle objects “by the weight” and “by the parameters” the analysis of the automatic control system was carried out for an object without self-leveling in a straight chain. Numerical evaluation criterion of efficiency dependencies on the magnitude of the ratio parameters (gain and time constant) model of the object and the object of control for all occasions were received.
About the Authors
A. V. Tsiryapkina
Siberian State Industrial University
Russian Federation
Russian Federation
Postgraduate, Junior Researcher of the Chair “Automation and Information Systems”,
42, Kirova Str., Novokuznetsk, Kemerovo Region, 654007
L. P. Myshlyaev
Siberian State Industrial University
Russian Federation
Russian Federation
Dr. Sci. (Eng.), Professor of the Chair “Automation and Information Systems”,
42, Kirova Str., Novokuznetsk, Kemerovo Region, 654007
K. A. Ivushkin
LLC United Company “Sibshahtostroy”
Russian Federation
Russian Federation
Cand. Sci. (Econ.), Deputy General Director ,
9, Kuznetskoe route, Novokuznetsk, Kemerovo Region, 650341
V. V. Grachev
Siberian State Industrial University
Russian Federation
Russian Federation
Cand. Sci. (Eng.), Assist. Professor of the Chair “Automation and Information Systems”,
42, Kirova Str., Novokuznetsk, Kemerovo Region, 654007
References
1. Uteush E.V., Uteush Z.V. Upravlenie izmel’chitel’nymi agregatami [Control of chopping cutter]. Moscow: Mashinostroenie, 1973, 280 p. (In Russ.).
2. Amelin A.G., Yashke E.V. Proizvodstvo sernoi kisloty [Production of sulfuric acid]. Moscow: Vysshaya shkola, 1980, 245 p. (In Russ.).
3. Khainish S.V. On the optimal control of the objects with closed cycle. In: Sb. Upravlenie slozhnymi sistemami [In: Control of complex systems]. Moscow: IAT, 1974, pp. 42‒55. (In Russ.).
4. Nagiev M.F. Teoreticheskie osnovy retsirkulyatsionnykh protsessov v khimii [Theoretical basis of the recirculation processes in chemistry]. Moscow: Nauka, 1962, 322 p. (In Russ.).
5. Yanushevskii R.T. Upravlenie ob”ektami s zapazdyvaniem [Control of the objects with lagging]. Moscow: Nauka, 1978, 416 p. (In Russ.).
6. Gorecki Henryk. Analisa i syntesa ukladow regulacji z opoznieniem. Warszawa: Wydaw. Naukowo-Techniczne, 1971. (Russ.ed.: Gorecki H. Analiz i sintez sistem upravleniya s zapazdyvaniem. Trans. from Pol. Moscow: Mashinostroenie, 1974, 328 p.).
7. Myshlyaev L.P., Ivushkin A.A., Sazykin G.P. Sistemy avtomatizatsii na osnove naturno-model’nogo podkhoda v 3-kh t. T. 2: Sistemy avtomatizatsii proizvodstvennogo naznacheniya [Automated systems based on natural-model approaches in three volumes. vol. 2: Commercial automated systems]. Novosibirsk: Nauka, 2006, 483 p. (In Russ.).
8. Dylevskii A.V., Lozgachev G.I. Construction of the regulator for the objects with the dispersed parameters by the transfer function of the closed system. Vestnik VGU. Seriya fi zika, matematika. 2004, no. 2, pp. 154‒157. (In Russ.).
9. Dylevskii A.V., Lozgachev G.I., Malyutina V.S. Synthesis of the modal regulator for the object with the dispersed parameters. Vestnik VGU. 2007, no. 1, pp. 128‒132. (In Russ.).
10. Li Yi, Ko King-Tim. Chen Guanrong A Smith predictor based PI-controller for active queue management. IEICE Transactions on communications. Oxford University Press. 2005, no. 11, pp. 42‒93.
11. Eremin E.L., Lelyanov B.N., Shelenok E.A. Discrete algorithms of robust control with nonlinear-unsteady objects in periodic modes. Vestnik TOGU. 2010, no. 1 (16), pp. 45‒54. (In Russ.).
12. Myshlyaev L.P., Tsiryapkina A.V., Ivushkin K.A., Kiselev S.F. Management of objects with recycle. Izvestiya VUZov. Chernaya metallurgiya = Izvestiya. Ferrous Metallurgy. 2015. vol. 58, no. 5, pp. 381‒385. (In Russ.).
13. Raу W. Harmon. Advanced process control. McGraw-Hill, New York etc. 1981, 326 p. (Russ.ed.: Raу W. Metody upravleniya tekhnologicheskimi protsessami. Moscow: Mir, 1983. 368 p.).
14. Myshlyaev L.P., Ivushkin A.A., Venger K.G., Kiselev S.F., Tsiryapkina A.V., Berezin D.G., Chichindaev M.G. Baragichev K.E. Sistema regulirovaniya ob”ekta s retsiklom [Control system of recycle objects]. Byulleten’ evraziiskogo patentnogo vedomstva 021192 V1, no. 2011130360/08 G05B13/00.
15. Myshlyaev L.P., Ivushkin A.A., Ivushkin K.A., Kiselev S.F., Tsiryapkina A.V. Sistema regulirovaniya ob”ekta s retsiklom [Control system of recycle objects]. Patent RF no. 2542910, Byulleten’ izobretenii. 2015, no. 6.
Review
For citations:
Tsiryapkina A.V., Myshlyaev L.P., Ivushkin K.A., Grachev V.V. CLASSIFICATION OF OBJECTS WITH RECYCLE AND IMPACT ANALYSIS OF MODELS UNCERTAINTY ON EFFECTIVE MANAGEMENT SYSTEMS OF THESE OBJECTS. Izvestiya. Ferrous Metallurgy. 2015;58(12):925-931. (In Russ.) https://doi.org/10.17073/0368-0797-2015-12-925-931
Views:
596
Email this article 