MANAGEMENT OF OBJECTS WITH RECYCLE
https://doi.org/10.17073/0368-0797-2015-5-381-385
Abstract
The article discusses the management of objects with positive
feedback or recycles. Introduction of positive feedbacks in the management objects of different nature gives them qualitatively new properties and change significantly the dynamics of behavior that requires a special approach in the regulation. There is classification of recycle objects with the release of four types: recycle under “concentration”, “weight”, “weight and concentration”, as well as objects with “coordinate and parametric effect recycles”. The authors describe the structure of the object model to recycle for the first three classes in general. The control system for objects recycle under “weight” and the system of coordinate-parametric control object recycle are shown. The results of analytical and numerical studies, the results of the analysis of the effectiveness of control systems, as well as graphics transients under “feedforward control” and “target control” are represented in the paper.
About the Authors
L. P. Myshlyaev
Siberian State Industrial University 42, Kirova str., Novokuznetsk, Kemerovo Region, 654007, Russia
Russian Federation
Russian Federation
Dr. Sci. (Eng.), Professor of the Chair “Automation and Information Systems”
A. V. Tsiryapkina
Siberian State Industrial University 42, Kirova str., Novokuznetsk, Kemerovo Region, 654007, Russia
Russian Federation
Russian Federation
Postgraduate, Junior Researcher of the Chair “Automation and Information Systems”
K. A. Ivushkin
LLC United Company “Sibshahtostroy” 9, Kuznetskoe route, Novokuznetsk, Kemerovo Region, 654034, Russia
Russian Federation
Russian Federation
Cand. Sci. (Economics), Deputy General Director
S. F. Kiselev
Siberian State Industrial University 42, Kirova str., Novokuznetsk, Kemerovo Region, 654007, Russia
Russian Federation
Russian Federation
Cand. Sci. (Eng.), Assist. Professor of the Chair “Automation and Information Systems”
References
1. Peitgen Heinz-Otto, Richter Peter H. The Beauty of Fractals. Images of Complex Dynamical Systems. Springer-Verlag Berlin Heidelberg, 1986. (Russ.ed.: Peitgen H., Richter P. Krasota fraktalov. Obrazy kompleksnykh dinamicheskikh system. Moscow: Mir, 1993. 176 p.)
2. Starovatskaya S.N., Tsiryapkina I.V., Myshlyaev L.P. Identification methods of material structures with fractals. Fundamental’nye problemy sovremennogo materialovedeniya. 2014, no. 3, vol. 11, pp. 290–293. (In Russ.).
3. Starovackaya S.N., Myshlyaev L.P., Tsiryapkina I.V. Materials structure description by fractal complex. External fields processing and treatment technology and preparation of nanostructure of metals and alloys: Book of the International seminar articles, 1 – 7October 2014, Siberian State Industrial University. Gromov V. еd. Novokuznetsk: Publishing Center SibSIU, 2014, p. 348.
4. Kiseleva M.Y., Smagin V.I. Model predictive control for discrete systems with state and input delays. Vestnik Tomskogo gosudarstvennogo universiteta. Upravlenie, vychislitel’naya tekhnika i informatika. 2011, no. 1, pp. 5–12. (In Russ.).
5. Sim T.P., Hong G.S., Lim K.B. Modified Smith predictor with dementhon-horaud pose estimation algorithm for 3D visual servoing. – Robotica: Cambridge University Press, 2002, no. 2, pp. 615–624.
6. Li Yi, Ko King-Tim, Chen Guanrong A Smith predictor based PIcontroller for active queue management / IEICE Transactions on communications. Oxford University Press, 2005, no. 11, pp. 42–93.
7. Raу W. Harmon. Advanced process control. McGraw-Hill, New York etc. 1981, 326 p. (Russ.ed.: Raу W. Metody upravleniya tekhnologicheskimi protsessami. Moscow: Mir, 1983. 368 p.).
8. Letov A.M. Dinamika poleta i upravlenie [Flight dynamics and control]. Moscow: Nauka, 1969. 360 p. (In Russ.).
9. Guretskii Kh. Analiz i sintez sistem upravleniya s zapazdyvaniem [Analysis and synthesis of control system with the lagging]. Moscow: Mashinostroenie, 1974. 328 p. (In Russ.).
10. Myshlyaev L.P., Ivushkin A.A., G.P. Sazykin etc. Sistemy avtomatizatsii na osnove naturno-model’nogo podkhoda: Monografiya v 3-kh t. T. 2. Sistemy avtomatizatsii proizvodstvennogo naznacheniya [Automation systems on the basis of a full-scale model approach: Monography in 3 volumes. Vol. 2. Commercial automation systems]. Myshlyaev L.P. ed. Novosibirsk: Nauka, 2006. 483 p. (In Russ.).
Review
For citations:
Myshlyaev L.P., Tsiryapkina A.V., Ivushkin K.A., Kiselev S.F. MANAGEMENT OF OBJECTS WITH RECYCLE. Izvestiya. Ferrous Metallurgy. 2015;58(5):381-385. (In Russ.) https://doi.org/10.17073/0368-0797-2015-5-381-385
Views:
684
Email this article 