Preview

Izvestiya. Ferrous Metallurgy

Advanced search

PRODUCTION OF MANGANESE FERROALLOYS FROM DOMESTIC MANGANESE ORES

https://doi.org/10.17073/0368-0797-2014-9-5-12

Abstract

This paper studies the possibility and proposed optimal technological scheme of manganese ferroalloys of manganese ores from Usinskoye deposit on the basis of analysis of the concentrates chemical composition and indicators of manganese ferroalloys smelting processes. It is shown that the standard manganese ferroalloys can be produced without attracting the rich content of manganese, low-phosphorous import manganese ore. The solution of this problem is of strategic importance from the standpoint of economic security and import substitution of manganese resources. The authors actualized the direction, allowing to explore opportunities not only to increase the volume of melt in the Russian high-carbon ferromanganese and ferrosilicon manganese, including through the involvement in the domestic production of manganese ore, but also to develop import-substituting technology for the production of refined manganese fer-roalloys – medium and low carbon ferromanganese and manganese metal from these ores.

About the Authors

L. A. Polulyakh
National University of Science and Technology “MISIS” (MISIS) (4, Leninskii pr., Moscow, 119049, Russia)
Russian Federation
Assist. Professor of the Chair “Extraction and recycling of ferrous metals”


V. Ya. Dashevskii
National University of Science and Technology “MISIS” (MISIS) (4, Leninskii pr., Moscow, 119049, Russia)
Russian Federation

Dr. Sci. (Eng.), Professor of the Chair “Extraction and recycling of ferrous metals”



Yu. S. Yusfin
National University of Science and Technology “MISIS” (MISIS) (4, Leninskii pr., Moscow, 119049, Russia)
Russian Federation

Dr. Sci. (Eng.), Professor of the Chair “Extraction and recycling of ferrous metals”



References

1. Leont’ev L.I., Zhuchkov V.I., Smirnov L.A., Dashevskii V.Ya. Proizvodstvo ferrosplavov v mire i Rossii [Ferroalloy production in the world and Russia]. Stal’. 2007, no. 3, pp. 43–47. (In Russ.).

2. Tigunov L.P., Smirnov L.A., Menadzhieva R.A. Marganets: tekhnologiya, proizvodstvo, ispol’zovanie [Manganese: technology, production and use]. Ekaterinburg: Izd-vo AMB. 2006. 184 p. (In Russ.).

3. Chernobrovin V.P., Mizin V.G., Sirina T.P., Dashevskii V.Ya. Kompleksnaya pererabotka karbonatnogo margantsevogo syr’ya: khimiya i tekhnologiya [Complex processing of carbonate manganese ore: chemistry and technology]. Chelyabinsk: Izd. Tsentr YuUrGU. 2009. 294 p. (In Russ.).

4. Tekhnologicheskii reglament dlya proekta «Stroitel’stvo Usinskogo GOKa drobil’no-obogatitel’naya fabrika». OAO “Uralmekhanobr” [Production schedules for the project “Construction of Usinskoye Mining crushing and beneficiation plant”. JSC “Uralmekhanobr” ]. Ekaterinburg. 2008. 64 p. (In Russ.).

5. Lyakishev N.P., Gasik M.I., Dashevskii V.Ya. Metallurgiya ferro-splavov [Metallurgy of ferroalloys]. Part. 1. Moscow: Ucheba. 2006. 117 p. (In Russ.).

6. Dashevskii V.Ya., Shchedrovitskii V.Ya., Dashevskii Ya.V., Ka-shin V.I. etc. Shikhta dlya vyplavki metallicheskogo margantsa [Charge for smelting manganese metal ]. Certifi cate of authorship of USSR no. 1254044, 1984. Byul. no. 32. (In Russ.).

7. Aleksandrov A.A., Dashevskii V.Ya., Yusfi n Yu.S. etc. Increase of use of manganese in the production of metal manganese. Izvestiya VUZov. Chernaya metallurgiya = Izvestiya – Ferrous Metallurgy. 2013, no. 7, pp. 32–37. (In Russ.).

8. Dashevskii V.Ya., Aleksandrov A.A., Yusfi n Yu.S., Leont’ev L.I., Podgorodetskii G.S., Gasik M.I. Sposob legirovaniya chuguna margantsem [A method for manganese alloying of iron]. Patent RF no. 2458994. 2012. Byul. No. 23. (In Russ.).

9.


Review

For citations:


Polulyakh L.A., Dashevskii V.Ya., Yusfin Yu.S. PRODUCTION OF MANGANESE FERROALLOYS FROM DOMESTIC MANGANESE ORES. Izvestiya. Ferrous Metallurgy. 2014;57(9):5-12. (In Russ.) https://doi.org/10.17073/0368-0797-2014-9-5-12

Views: 1230


Creative Commons License
This work is licensed under a Creative Commons Attribution 4.0 License.


ISSN 0368-0797 (Print)
ISSN 2410-2091 (Online)