THE DEVELOPMENT OF THE MODELING SYSTEM OF THE CALCULATION OF HEAT EXCHANGE PROCESSES AND ESTIMATION OF PARAMETERS OF THE ZONE OF VISCOPLASTIC STATE OF IRON METAL MATERIALS IN BLAST FURNACE

This report presents the development of cycles used by authors in the creation of the computer decision support system, allowing to size up an arrangement and the form of a zone of viscousplastic weights of iron metal materials (plastic zone) in a blast furnace, to carry out diagnostic of its rational configuration under really accessible information on the working blast furnace for the base period, and also to solve a complex of problems for the design period at change of operating conditions of fusion. The article reflects the functionality and the results of use of the software to solve technological problems in the blast-furnace process of OJSC Magnitogorsk Iron and Steel Works.

blast furnace, the computer decision support system, software development, heat exchange stockline, technological smelting conditions, charge material distributions, liquid phase formation, plastic zone position

1. Модельные системы поддержки принятия решений в АСУ ТП доменной плавки металлургии / Н.А. Спирин, В.В. Лавров, В.Ю. Рыболовлев и др. Под ред. Н.А. Спирина. – Екатеринбург: Ур ФУ, 2011. – 462 .

2. Компьютерные методы моделирования доменного процесса / О.П. Онорин, Н.А. Спирин, В.Л. Терентьев и др. Под ред. Н.А. Спирина. – Екатеринбург : УГТУ – УПИ, 2005. – 301 с.

3. Юсфин Ю.С. Металлургия чугуна: – М.: ИКЦ «Академкнига», 2004. – 774 с.

4. Blast furnace Phenomena and modelling / Ed. By Yasuo Omori. Elsevier applied science. – London and New York, 1987. – 631 р.

5. Инада С., Кабаяси И., Исабэ М. // Тэцу то хаганэ. 1984. Т. 34, № 4. С. 59 – 64.

6. Хатига С. Оно Р., Фусэ К. и др. // Тэцу то хаганэ. 1986. Т. 36, № 3. С. 77 – 80.

7. Vecehida G., Giuli M. // Revue de Metallurgie – CIT. 1984. V. 81. № 5. P. 369 – 383.

8. Peters K.H., Alpeter W., Bachhofen H.Y. e.a. // Stahl and Eisen. 1984. Bd. 104. № 14. C. 59 – 62.

9. Yamamoto T., Shokyu T., Kanoshima H. e.a. // Transactions of the Iron andSteel Institute of Japan. 1982. № 10. P. 774.

10. Ohno Y., Kondo K., Fukushima T. // Revue de Metallurgie. CIT. 1983. № 10. P. 809 – 825.

11. Kyle I. // Proceeding Conference, September 11–13. 1979. – London, 1980. P. 403 – 415.