THE COMPLEX MANUFACTURABILITY ANALYSIS OF COLD ROLLING OF TUBES
https://doi.org/10.17073/0368-0797-2013-7-69-70
Abstract
The option of quantification manufacturability analysis of cold rolling of tubes with the specified quality level is offered here. The criteria of accuracy, tubes’ defectiveness, level of the efforts which are made during the rolling and the complex criteria are applied for the analysis. The example of how to use the offered formulas in order to choose the best tool calibration in rolling by specific route is given here. Suggested technique can be used to analyze the several options of technological modes of tubes’ rolling with the specified quality level.
About the Authors
G. A. Orlov
Уральский федеральный университет
Russian Federation
Russian Federation
I. V. Smel’chakov
Уральский федеральный университет
Russian Federation
Russian Federation
References
1. Орлов Г.А. Моделирование показателей качества холоднодеформированных труб // Сталь. 2005. № 3. С. 70 – 73.
2. Богатов А.А., Мижирицкий О.И., Смирнов С.В. Ресурс пластичности металлов при обработке давлением. – М.:Металлургия, 1984. – 144 с.
3. Орлов Г.А. Пути совершенствования калибровок инструмента станов холодной прокатки труб // Сталь. 2004. № 12. С. 83 – 85.
Review
For citations:
Orlov G.A., Smel’chakov I.V. THE COMPLEX MANUFACTURABILITY ANALYSIS OF COLD ROLLING OF TUBES. Izvestiya. Ferrous Metallurgy. 2013;56(7):69-70. (In Russ.) https://doi.org/10.17073/0368-0797-2013-7-69-70
Views:
482
Email this article 