Influence of laser spot size on structure and properties of high-temperature CompoNIAL-M5-3 alloy produced by selective laser melting | Kaplanskii | Izvestiya. Ferrous Metallurgy

Izvestiya. Ferrous Metallurgy
Izvestiya vuzov. Chernaya metallurgiya

ISSN 0368-0797 (Print)
ISSN 2410-2091 (Online)

eng | рус

Preview

Izvestiya. Ferrous Metallurgy

Advanced search

Archives

Download this PDF file

For citations:

Kaplanskii Yu.Yu., Ageev M.I., Bychkova M.Ya., Fadeev A.A., Levashov E.A. Influence of laser spot size on structure and properties of high-temperature CompoNIAL-M5-3 alloy produced by selective laser melting. Izvestiya. Ferrous Metallurgy. 2023;66(2):184-190. https://doi.org/10.17073/0368-0797-2023-2-184-190

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 License.

ISSN 0368-0797 (Print)
ISSN 2410-2091 (Online)

* not an advertisement

Indexing Databases

* not an advertisement

Editor-in-Chief

Leont’ev L.I.

Article Tools

Finding References

Email this article (Login required)

Email the author (Login required)

About the Authors

Yu. Yu. Kaplanskii
National University of Science and Technology “MISIS”
Russian Federation

Yurii Yu. Kaplanskii, Cand. Sci. (Eng.), Research Associate of the Laboratory “In situ Diagnostics of Structural Transformations” of the Scientific and Educational Center SHS MISiS-ISMAN

4 Leninskii Ave., Moscow 119049, Russian Federation

M. I. Ageev
National University of Science and Technology “MISIS”
Russian Federation

Maksim I. Ageev, Postgraduate of the Chair of Powder Metallurgy and Functional Coatings, Junior Researcher of the Laboratory “In situ Diagnostics of Structural Transformations” of the Scientific and Educational Center SHS MISiS-ISMAN

4 Leninskii Ave., Moscow 119049, Russian Federation

M. Ya. Bychkova
National University of Science and Technology “MISIS”
Russian Federation

Marina Ya. Bychkova, Cand. Sci. (Eng.), Senior Lecturer of the Chair of Powder Metallurgy and Functional Coatings, Research Associate of the Scientific and Educational Center SHS MISiS-ISMAN

4 Leninskii Ave., Moscow 119049, Russian Federation

A. A. Fadeev
National University of Science and Technology “MISIS”; Baikov Institute of Metallurgy and Materials Science, Russian Academy of Sciences
Russian Federation

Andrei A. Fadeev, Cand. Sci. (Eng.), Research Associate, Baikov Institute of Metallurgy and Materials Science, Russian Academy of Sciences; Scientific Project Engineer of the Scientific and Educational Center SHS MISiS-ISMAN, National University of Science and Technology “MISIS”

4 Leninskii Ave., Moscow 119049, Russian Federation

49 Leninskii Ave., Moscow 119991, Russian Federation

E. A. Levashov
National University of Science and Technology “MISIS”
Russian Federation

Evgeny A. Levashov, Dr. Sci. (Eng.), Prof., Head of the Chair of Powder Metallurgy and Functional Coatings, Director of the Scientific and Educational Center SHS MISiS-ISMAN

4 Leninskii Ave., Moscow 119049, Russian Federation

Notifications