Theoretical analysis of formation of automobile sheet roughness during temper rolling in shot-blasted rolls | Ogarkov | Izvestiya. Ferrous Metallurgy

Izvestiya. Ferrous Metallurgy
Izvestiya vuzov. Chernaya metallurgiya

ISSN 0368-0797 (Print)
ISSN 2410-2091 (Online)

eng | рус

Preview

Izvestiya. Ferrous Metallurgy

Advanced search

Archives

Download this PDF file

For citations:

Ogarkov N.N., Zvyagina E.Yu., Ismagilov R.R. Theoretical analysis of formation of automobile sheet roughness during temper rolling in shot-blasted rolls. Izvestiya. Ferrous Metallurgy. 2019;62(8):600-605. (In Russ.) https://doi.org/10.17073/0368-0797-2019-8-600-605

Views PDF (Rus): 528

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 License.

ISSN 0368-0797 (Print)
ISSN 2410-2091 (Online)

* not an advertisement

Indexing Databases

* not an advertisement

Editor-in-Chief

Leont’ev L.I.

Article Tools

Finding References

Email this article (Login required)

Email the author (Login required)

About the Authors

N. N. Ogarkov
Nosov Magnitogorsk State Technical University
Russian Federation

Dr. Sci. (Eng), Professor of the Chair of Machinery and Technologies for Pressure Processing and Mechanical Engineering

E. Yu. Zvyagina
Nosov Magnitogorsk State Technical University
Russian Federation

Cand. Sci. (Eng.), Senior Lecturer of the Chair of Machinery and Technologies for Pressure Processing and Mechanical
Engineering

R. R. Ismagilov
PJSC “Magnitogorsk Iron and Steel Works”
Russian Federation

Cand. Sci. (Eng.), Leading Specialist of the Department of Equipment and Services Procurement

Notifications