REDICTIVE MODEL OF DECARBURIZATION AND DETERMINATION OF METAL LOSS WITH FUMES DURING HEATING OF CAST BILLET IN HEATING FURNACE
https://doi.org/10.17073/0368-0797-2014-5-62-64
Abstract
The work performed forecast estimated payment intoxication and decarbonization of cast billets in the working conditions of the heating furnace walking beam of “Oskol Metallurgical Plant” (“OEMK”) with burning of high-energy fuel. The basis of the used model is the method of statistical data processing on an array of practical steel heating furnaces for rolling. It was found that application of the model is to determine the value of waste of metal for the period of decarburization of the metal surface during the heating unit in the blanks.
About the Authors
S. S. Pashnin
Stary Oskol technological Institute of National University of Science and Technology “MISiS” (Stary Oskol, Belgorod region, Russia)
Russian Federation
Postgraduate of the Chair Metallurgy and Metallography
Russian Federation
Postgraduate of the Chair Metallurgy and Metallography
Je. Je. Je.Je. Merker
Stary Oskol technological Institute of National University of Science and Technology “MISiS” (Stary Oskol, Belgorod region, Russia)
Russian Federation
Dr. Eng., Professor of the Chair Metallurgy and Metallography
Russian Federation
Dr. Eng., Professor of the Chair Metallurgy and Metallography
References
1. Temljancev M.V., Mihajlenko Ju.E. Okislenie i obezuglerozhivanie stali v processah nagreva pod obrabotku davleniem (The oxidation and decarburization of steel during heat treatment under pressure). Moscow: Teplotehnik, 2006. 200 p.
2. Timoshpol’skij V.I., Samojlovich Ju.A., T ruso-v a I.A. etc. Stal’noj slitok (Steel Ingot). Vol. 3. Minsk: Belorusskaja nauka, 2001. 879 p.
3. Spivak Je.I. Metallurg. 1984. № 2. Pp. 28 – 29.
4. Spivak Je.I. Metody uskorennyh raschetov nagrevatel’nyh pechej (Methods for accelerated calculations of heating furnaces). Moscow: Metallurgija, 1988. 141 p.
5. Pratusevich A.E. Val’covshhik operator prokatnyh stanov (Operator of rolling mills). Vol. 5. Staryj Oskol, 1995. 180 p.
6.
Review
For citations:
Pashnin S.S., Je.Je. Merker J.J. REDICTIVE MODEL OF DECARBURIZATION AND DETERMINATION OF METAL LOSS WITH FUMES DURING HEATING OF CAST BILLET IN HEATING FURNACE. Izvestiya. Ferrous Metallurgy. 2014;57(5):62-64. (In Russ.) https://doi.org/10.17073/0368-0797-2014-5-62-64
Views:
656
Email this article 