ANALYSIS OF THE END WALL THICKNESS VARIATION OF TUBES AFTER REDUCING MILL | Orlov | Izvestiya. Ferrous Metallurgy

Izvestiya. Ferrous Metallurgy
Izvestiya vuzov. Chernaya metallurgiya

ISSN 0368-0797 (Print)
ISSN 2410-2091 (Online)

eng | рус

Preview

Izvestiya. Ferrous Metallurgy

Advanced search

Archives

Download this PDF file

For citations:

Orlov G.A., Ashkanov S.E., Orlov A.G. ANALYSIS OF THE END WALL THICKNESS VARIATION OF TUBES AFTER REDUCING MILL. Izvestiya. Ferrous Metallurgy. 2017;60(3):250-251. (In Russ.) https://doi.org/10.17073/0368-0797-2017-3-250-251

Views PDF (Rus): 700

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 License.

ISSN 0368-0797 (Print)
ISSN 2410-2091 (Online)

* not an advertisement

Indexing Databases

* not an advertisement

Editor-in-Chief

Leont’ev L.I.

Article Tools

Finding References

Email this article (Login required)

Email the author (Login required)

About the Authors

G. A. Orlov
Ural Federal University named after the first President of Russia B.N. Yeltsin
Russian Federation

Dr. Sci. (Eng.), Professor of the Chair "Metal Forming "

S. E. Ashkanov
Ural Federal University named after the first President of Russia B.N. Yeltsin
Russian Federation

Senior Engineer, Сandidates for a degree of Cand. Sci.

A. G. Orlov
Ural Federal University named after the first President of Russia B.N. Yeltsin
Russian Federation

MA Student of the Chair “Metal Forming"

Notifications