STRESSES AND STRAINS DURING ROLLING OF THE BALL
https://doi.org/10.17073/0368-0797-2016-8-587-588
Abstract
The problems associated with the study of stress-strain state of the metal and efforts on the mill for rolling the balls of large sizes are considered. Implementation of the proposed measures allowed the balls of high-quality with a diameter up to 125 mm to be rolled.
About the Authors
M. V. Filippova
Siberian State Industrial University, Novokuznetsk, Russia
Russian Federation
Russian Federation
Cand. Sci. (Eng.), Assist. Professor of the Chair “Metal Forming and Metal Science”. OJSC “EVRAZ ZSMK”
V. N. Peretyat’ko
Siberian State Industrial University, Novokuznetsk, Russia
Russian Federation
Russian Federation
Dr. Sci. (Eng.), Professor of the Chair “Metal Forming and Metal Science”. OJSC “EVRAZ ZSMK”
S. V. Smetanin
JSC “EVRAZ - Joint West Siberian Metallurgical Plant”, Novokuznetsk, Russia
Russian Federation
Russian Federation
Cand. Sci. (Eng.), Head of the Central Laboratory of Automation and Mechanization
References
1. Tselikov A.I., Barbarin M.V., Vasil’chikov M.V. etc. Spetsial’nye prokatnye stany [Special rolling mills]. Moscow: Metallurgiya, 1971, 336 p. (In Russ.).
2. Peretyat’ko V.N., Klimov A.S., Filippova M.V. Calibration of rolls of a ball-rolling mill. Part 1. Izvestiya VUZov. Chernaya metallurgiya = Izvestiya. Ferrous Metallurgy. 2013, no. 4, pp. 27–30. (In Russ.).
3. Peretyat’ko V.N., Klimov A.S., Filippova M.V. Calibration of rolls of a ball-rolling mill. Part 2. Izvestiya VUZov. Chernaya metallurgiya = Izvestiya. Ferrous Metallurgy. 2013, no. 6, pp. 16–20. (In Russ.).
Review
For citations:
Filippova M.V., Peretyat’ko V.N., Smetanin S.V. STRESSES AND STRAINS DURING ROLLING OF THE BALL. Izvestiya. Ferrous Metallurgy. 2016;59(8):587-588. (In Russ.) https://doi.org/10.17073/0368-0797-2016-8-587-588
Views:
584
Email this article 