STRUCTURE AND PROPERTIES OF THE WELDED WEAR RESISTANT ALLOY OF Fe – Cr – C – Mo – Ni – Ti – B SYSTEM
https://doi.org/10.17073/0368-0797-2016-9-671-672
Abstract
The structure and properties of the weld metal by arc method alloy of Fe – Cr – C – Mo – Ti – Ni – B iron were investigated. The eff ect of the modifi er on the basis of TiN titanium nitride on hardness and resistance of welded metal to abrasion was studied at normal and elevated temperatures.
Keywords
Supporting agencies: Russian President (Grant no. MK-4265.2014.8) and RFBR (grant no. 14-08-00868a).
About the Authors
A. A. Antonov
Volgograd State Technical University, Volgograd
Russian Federation
Postgraduate of the Chair “Equipment and Technology of Welding Production”
Russian Federation
Postgraduate of the Chair “Equipment and Technology of Welding Production”
A. A. Artem’ev
Volgograd State Technical University, Volgograd
Russian Federation
Cand. Sci. (Eng.), Assist. Professor of the Chair “Equipment and Technology of Welding Production”
Russian Federation
Cand. Sci. (Eng.), Assist. Professor of the Chair “Equipment and Technology of Welding Production”
G. N. Sokolov
Volgograd State Technical University, Volgograd
Russian Federation
Dr. Sci. (Eng.), Professor of the Chair “Equipment and Technology of Welding Production”
Russian Federation
Dr. Sci. (Eng.), Professor of the Chair “Equipment and Technology of Welding Production”
References
1. Osipov M.Yu. Study and research of the wear resistant surfacing alloys for work in the conditions of abrasive wear at elevated temperatures. Novі materіali і tekhnologії v metalurgії ta mashinobuduvannі: naukovii zhurnal. 2014, no. 1, pp. 52–57. (In Russ.).
2. Leinachuk E.I. Elektrodugovaya naplavka detalei pri abrazivnom i gidroabrazivnom iznose [Arc welding of parts at abrasive and hydroabrasive wear]. Kiev: Nauk. dumka, 1985, 160 p. (In Russ.).
Review
For citations:
Antonov A.A., Artem’ev A.A., Sokolov G.N. STRUCTURE AND PROPERTIES OF THE WELDED WEAR RESISTANT ALLOY OF Fe – Cr – C – Mo – Ni – Ti – B SYSTEM. Izvestiya. Ferrous Metallurgy. 2016;59(9):671-672. (In Russ.) https://doi.org/10.17073/0368-0797-2016-9-671-672
Views:
547
Email this article 