USE OF ADDITIVES FOR IMPROVEMENT OF CERAMIC MOLDS PROPERTIES IN DISPENSABLE PATTERN CASTING
https://doi.org/10.17073/0368-0797-2013-2-69-70
Abstract
The influence of combined use of technological additives of aluminum powder ASD-4 and alumino methyl sodium siliconate (AMSR) on strength of ethylsilicate forms is considered. The choice of optimum amount of additives is made: amount of ASD-4 is 4 % from filler mass and amount of AMSR is 2 – 3 % in addition to mass.
About the Author
N. Yu. Parshukova
Снежинский физико-технический институт – филиал Национального исследовательского ядерного университета «МИФИ»
Russian Federation
Russian Federation
References
1. Стрелов К.К. Теоретические основы технологии огнеупорных материалов. – М.: Металлургия, 1985. – 480 с.
2. Гузман И.Я. // Стекло и керамика. 1985. № 6. С. 16 – 18.
3. Паршукова Н.Ю. // Литейное производство. 2001. № 10. С. 18, 19.
Review
For citations:
Parshukova N.Yu. USE OF ADDITIVES FOR IMPROVEMENT OF CERAMIC MOLDS PROPERTIES IN DISPENSABLE PATTERN CASTING. Izvestiya. Ferrous Metallurgy. 2013;56(2):69-70. (In Russ.) https://doi.org/10.17073/0368-0797-2013-2-69-70
Views:
463
Email this article 