COMPLICATED EXTERNAL HEAT EXCHANGE IN THE VERTICAL CHAMBER FURNACE DESIGNED FOR HEAT TREATMENT OF LONG PRODUCTS
https://doi.org/10.17073/0368-0797-2015-9-667-671
Abstract
Calculation of the external heat exchange in the combustion furnaces is always complicated because of insufficient knowledge of the convective heat transfer characteristics. It is extremely important to know the above-mentioned characteristics as the modern hating furnaces are equipped with the high-speed burners providing for running of the gas-air mixture at a speed of 100 – 150 m/sec. The present article demonstrates a procedure and results of the investigation of the complicated external heat transfer in the operating industrial furnace equipped with high-speed recuperative burners and lined with ceramic-and-fibrous blocks. The article also includes the recommendations on application of the submitted procedure and results of the abovementioned investigations.
About the Authors
M. D. Kazyaev
Ural Federal University named after the first President of Russia B.N. Yeltsin
Russian Federation
Russian Federation
Cand. Sci. (Eng.), Professor of the Chair “Thermal Physics and Informatics in Metallurgy”,
19, Mira str., Ekaterinburg, 620002
A. V. Vokhmyakov
Ural Federal University named after the first President of Russia B.N. Yeltsin
Russian Federation
Russian Federation
Cand. Sci. (Eng.), Assist. Professor of the Chair “Thermal Physics and Informatics in Metallurgy”,
19, Mira str., Ekaterinburg, 620002
E. V. Kiselev
Ural Federal University named after the first President of Russia B.N. Yeltsin
Russian Federation
Russian Federation
Cand. (Eng.), Assist. Professor of the Chair “Thermal Physics and Informatics in Metallurgy”,
19, Mira str., Ekaterinburg, 620002
D. I. Spitchenko
Ural Federal University named after the first President of Russia B.N. Yeltsin
Russian Federation
Russian Federation
Postgraduate of the Chair “Thermal Physics and Informatics in Metallurgy”,
19, Mira str., Ekaterinburg, 620002
References
1. Kazyaev M.D., Vokhmyakov A.M., Kiselev E.V., Spitchenko D.I., Kazyaev D.M., Eremin A.O. Investigation of thermal work of chamber vertical heat treatment furnaces with different heating systems and lining designs. In: Sb. trudov mezhdunarodnoi nauchno-prakticheskoi konferentsii «Tvorcheskoe nasledie V.E. Grum-Grzhimailo» [Papers of International scientifi c and practical conference «Artistic legacy of V.Ye. Grum-Grzhymaylo»]. Part. 1. Ekaterinburg: UrFU, 2014, pp. 246–259. (In Russ.).
2. Kazyaev M.D., Vokhmyakov A.M., Kiselev E.V., Spitchenko D.I., Kazyaev D.M. Energy-saving technologies in the industry. Furnace units. Ecology. In: Sb. materialov VII Mezhdunarodnoi nauchnopraktich. konf. posvyashchennoi 150-letiyu velikogo russkogo metallurga V.E. Grum-Grzhimailo [Materials of the 7th International Scientifi c-and- Practical conference dedicated the 150th anniversary of V.E. Groom-Grzhimailo, the famous Russian metallurgist]. Moscow: Izdatel’skii dom MISiS. NITU «MISiS», 2014, pp. 224–235. (In Russ.).
3. Spitchenko D.I., Vokhmyakov A.M., Kazyaev M.D., Kiselev E.V., Kazyaev D.M. Modernization of vertical chamber furnace for heat treatment of large forgings. In: Sb. dokladov Mezhdunarodnoi nauchno-praktich. konf. “Teoriya i praktika teplovykh protsessov v metallurgii” [Materials of the International Scientifi c-and-Practical Conference “Theory and Practice of Thermal Processes in Metallurgy”]. Ekaterinburg: UrFU, 2012, pp. 367–370. (In Russ.).
4. Mikheev M.A., Mikheeva I.M. Kratkii kurs teploperedachi [A brief course of heat transfer]. Moscow, Leningrad: Gosenergoizdat, 1960, 208 p. (In Russ.).
5. Zobnin B.F. Nagrevatel’nye pechi [Heating furnaces]. Moscow: Mashinostroenie, 1964, 311 p. (In Russ.).
6. Teplotekhnicheskie raschety metallurgicheskikh pechei [Thermotechnical calculation the metallurgical furnaces]. Telegin A.S. ed. Moscow: Metallurgiya, 1982, 358 p. (In Russ.).
7. Gusovskii V.G., Livshits A.E. Metodiki rascheta nagrevatel’nykh i termicheskikh pechei [Procedures of the heating and heat-treating furnace calculation]. Moscow: Teplotekhnik, 2004, 395 p. (In Russ.).
8. Raschet nagrevatel’nykh i termicheskikh pechei [Calculation of the heating and heat-treating furnaces]. Tymchak V.M., Gusovskii V.L. eds. Moscow: Metallurgiya, 1983, 481 p. (In Russ.).
Review
For citations:
Kazyaev M.D., Vokhmyakov A.V., Kiselev E.V., Spitchenko D.I. COMPLICATED EXTERNAL HEAT EXCHANGE IN THE VERTICAL CHAMBER FURNACE DESIGNED FOR HEAT TREATMENT OF LONG PRODUCTS. Izvestiya. Ferrous Metallurgy. 2015;58(9):667-671. (In Russ.) https://doi.org/10.17073/0368-0797-2015-9-667-671
Views:
525
Email this article 