STRUCTURE AND PROPERTIES CONTROL OF CHROMIUM WHITE CAST IRON BY THEIR MODIFYING
https://doi.org/10.17073/0368-0797-2015-6-412-416
Abstract
The cleaning of high chromium cast iron melt from scab, non-metallic inclusions and gases is an urgent task of obtaining the quality parts for shotcasting machines. In this work the authors showed the producing technology of blades castings for shotcasting machines. The infl uence of different deoxidants (Ti, Al, SIMISh-1, ZhKMK-6, FCM-6) on the quality and properties of high chromium cast iron castings was determined. The authors analyzed the contamination of non-metallic inclusions, investigated thermogram and polythermals density and iron with various deoxidants at different concentrations. The research has shown that to accelerate the formation of trigonal carbide and increase performance properties of chromium cast irons it is necessary to modify them with the complex modifiers that do not contain silicon.
About the Authors
Khosen Ri
Pacific State University, Khabarovsk
Russian Federation
Dr. Sci. (Eng.), Professor, Head of the Chair “Foundry and metal technology”
Russian Federation
Dr. Sci. (Eng.), Professor, Head of the Chair “Foundry and metal technology”
G. S. Dzyuba
Pacific State University, Khabarovsk
Russian Federation
Cand. Sci. (Eng.), Assist. Professor of the Chair “Foundry and metal technology”
Russian Federation
Cand. Sci. (Eng.), Assist. Professor of the Chair “Foundry and metal technology”
E. Kh. Ri
Pacific State University, Khabarovsk
Russian Federation
Sci. (Eng.), Professor of the Chair “Foundry and metal technology”, Executive Director of the Department of Innovation
Russian Federation
Sci. (Eng.), Professor of the Chair “Foundry and metal technology”, Executive Director of the Department of Innovation
M. A. Ermakov
Pacific State University, Khabarovsk
Russian Federation
Engineer of the Department of scientific research
Russian Federation
Engineer of the Department of scientific research
E. S. Mamontova
Pacific State University, Khabarovsk
Russian Federation
Postgraduate of the Chair “Foundry and metal technology”
Russian Federation
Postgraduate of the Chair “Foundry and metal technology”
References
1. Teikh V.A., Ri Khosen, Litvinenko A.N., Dzyuba G.S. Deoxidation and refining of high chromium cast iron. Liteinoe proizvodstvo. 1984, no. 8, p.10. (In Russ.).
2. Gol’dshtein Ya.E., Mizin V.G. Modifitsirovanie i mikrolegirovanie chuguna i stali [Modification and microalloying of iron and steel]. Moscow: Metallurgiya, 1986, 272 p. (In Russ.).
3. Kolokol’tsev V.M., Mironov O.A., Petrochenko E.V., Bryalin M.F., Voronkov B.V. Increasing the properties of heat and wear-resistant iron by refining and modification. Liteinoe proizvodstvo. 2007, no. 3, pp. 27–29. (In Russ.).
4. Taran Yu.N. O modifitsirovanii evtektik v chugunakh [Eutectic modification in cast iron]. In: Struktura i svoistva chuguna i stali [Structure and properties of cast iron and steel]. Dnepropetrovsk, 1967, pp. 41–47. (In Russ.).
5. Orekhova A. I. Issledovanie i razrabotka sposoba upravleniya pervichnoi strukturoi khromistykh chugunov s pomoshch’yu modifitsirovaniya s tsel’yu povysheniya kachestva otlivok.: avtoref. diss. kand. tekh. nauk [The research and development of a method for controlling the primary structure of chromium cast iron by means of modification in order to improve the quality of the castings]. Moskva. 2010, 22 p. (In Russ.).
6. Rozhkova E.V., Kozlov L.Ya., Rumyantsev V.V., Kirillov A.A. Optimization of the chemical composition of wear-resistant chromium cast iron. Chernye metally, Tsvetnye metally, Spec. Issue, 2005, pp. 20–25. (In Russ.).
7. Kolokol’tsev V.M., Nazarov O.A., Korotchenko V.V. etc. Wearresistant cast iron for castings of parts for shotblasting chambers. Liteinoe proizvodstvo, 1992, no. 7, pp. 11–12. (In Russ.).
Review
For citations:
Ri Kh., Dzyuba G.S., Ri E.Kh., Ermakov M.A., Mamontova E.S. STRUCTURE AND PROPERTIES CONTROL OF CHROMIUM WHITE CAST IRON BY THEIR MODIFYING. Izvestiya. Ferrous Metallurgy. 2015;58(6):412-416. (In Russ.) https://doi.org/10.17073/0368-0797-2015-6-412-416
Views:
854
Email this article 