EXPERIMENTAL STUDY OF THE INFLUENCE OF HOLLOW (TUBULAR) ELECTRODE ON NATURE OF ELECTRIC ARC BURNING IN EAF
https://doi.org/10.17073/0368-0797-2015-3-207-209
Abstract
The article considers the questions about infl uence of a hollow (tubular) electrode on nature of electric arc burning. Laboratory researches according these were executed. During researches it was established that the smallest deviation angle of an electric arc from an axis of the electrode was reached at relation dotv / Del = 0.2. The regression equation allowing to estimate the deviation angle of electric arc depending on diameter of hole in a hollow (tubular) electrode was obtained
About the Authors
A. A. KozhukhovRussian Federation
Cand. Sci. (Eng.), Assist. Professor, Head of the Chair “Metallurgy and Metallography”
A. S. Tkachev
Russian Federation
Assistant of the Chair “Metallurgy and Metallography”
E. N. Mel’nikov
Russian Federation
Postgraduate
References
1. Egorov A.E., Nikol’skii L.E, Okorokov N.V. The application of tubular electrodes in electric arc furnaces. Elektrotermiya, 1962, no. 9, pp. 27–31. (In Russ.).
2. Okorokov N.V., Nikol’skii L.E., Egorov A.V. The effi ciency of the arc furnace with tubular electrodes. Elektrotermiya, 1962, no. 9, pp. 13–18. (In Russ.).
Review
For citations:
Kozhukhov A.A., Tkachev A.S., Mel’nikov E.N. EXPERIMENTAL STUDY OF THE INFLUENCE OF HOLLOW (TUBULAR) ELECTRODE ON NATURE OF ELECTRIC ARC BURNING IN EAF. Izvestiya. Ferrous Metallurgy. 2015;58(3):207-209. (In Russ.) https://doi.org/10.17073/0368-0797-2015-3-207-209