DEVELOPMENT OF ELEMENTS RECEIVING CHAMBER OF CCM INTERMEDIATE LADLES
https://doi.org/10.17073/0368-0797-2014-3-23-27
Abstract
The layout elements of the receiving chamber of the tundish one-way slab continuous casting machine (CCM), equipped with a special metal receiver and the partition, set on the border of the receiving chamber tundish are considered. The article deals with the design elements f the flow distribution steel (PSA). Metal receiver and partition are equipped with overflow openings arranged symmetrically relative to the longitudinal axis of the PC. The Study shows the effect of the new layout and PSA steel and construction of its elements on the parameters of the metal flow in the tundish and removal of nonmetallic inclusions.
About the Authors
K. N. Vdovin
Magnitogorsk state technical university named after G.I. Nosov (Magnitogorsk, Russia)
Russian Federation
Dr.Eng., Professor of the Chair of Electro-metallurgy and foundry production
Russian Federation
Dr.Eng., Professor of the Chair of Electro-metallurgy and foundry production
E. A. Melnichuk
Magnitogorsk state technical university named after G.I. Nosov (Magnitogorsk, Russia)
Russian Federation
Postgraduate of the Chair of Ferrous Metallurgy
Russian Federation
Postgraduate of the Chair of Ferrous Metallurgy
A. V. Nefedov
National University of Science and Technology “MISiS”, Novotroitsk branch (Novotroitsk, Orenburg region, Russia)
Russian Federation
Dr.Eng., Head of the Chair “Equipment of metallurgical mills”
Russian Federation
Dr.Eng., Head of the Chair “Equipment of metallurgical mills”
V. V. Tochilkin
National University of Science and Technology “MISiS”, Novotroitsk branch (Novotroitsk, Orenburg region, Russia)
Russian Federation
Russian Federation
Dr.Eng., Professor of the Chair “Equipment of metallurgical mills”
References
1. Vdovin K.N., Mel'nichuk E.A., Tochilkin V.V. Tehnologija metallov. 2011. № 11. pp. 39 − 41.
2. Javojskij V.I., Dorofeev G.A., Povh I.L. Teorija produvki staleplavil'noj vanny (Blowing theory of metal). Moscow: Metal-lurgija, 1974. 496 p.
3. Tochilkin V.V. Remont, vosstanovlenie i modernizacija. 2008. № 6. pp. 44 − 47.
4. Efimov V.A., Jel'darhanov A.S. Tehnologii sovremennoj metallurgii (Technologies of modern metallurgy). Moscow: Novye tehnologii, 2004. 784 p.
5.
Review
For citations:
Vdovin K.N., Melnichuk E.A., Nefedov A.V., Tochilkin V.V. DEVELOPMENT OF ELEMENTS RECEIVING CHAMBER OF CCM INTERMEDIATE LADLES. Izvestiya. Ferrous Metallurgy. 2014;57(3):23-27. (In Russ.) https://doi.org/10.17073/0368-0797-2014-3-23-27
Views:
700
Email this article 