STUDYCONDITIONS OF NON-METALLIC INCLUSIONS FLOTATION DURING ARGON INJECTION OF LIQUID BATH TUNDISH CCM. REPORT 3
https://doi.org/10.17073/0368-0797-2014-3-17-23
Abstract
The research results were used to create the original purging block for industrial tests on slab caster PJSC “Alchevsky Iron and Steel Works”. Design feature of the purge block is its geometrical form as a ring covering the tundish nozzle. This injection argon through calibrated holes made in special refractory tubes. As a result of tests, that maximum refining effect is achieved at a flow rate of 10 – 12 l/min.
About the Authors
A. N. Smirnov
National Technical University of Donetsk (Donetsk, Ukraine)
Ukraine
Ukraine
Dr.Eng., Professor of the Chair “Steel Metallurgy”
V. G. Efimova
Kiev Polytechnic Institute (Kiev, Ukraine)
Ukraine
Ukraine
Cand.Eng., the Chair of “Physical Chemistry”
A. V. Kravchenko
National Technical University of Donetsk (Donetsk, Ukraine)
Ukraine
Ukraine
Graduate student of the Chair “Steel Metallurgy”
K. E. Pismarev
Cand.Eng., Chief Engineer
Ukraine
Ukraine
References
1. Javojskij V.I. Nemetallicheskie vkljuchenija i svojstva stali (Nonmetallic inclusions and properties of steel). Moscow: Metal-lurgija, 1980. 176 p.
2. Gubenko S.I. Nemetallicheskie vkljuchenija v stali (Nonmetallic inclusions of steel). Dnepropetrovsk: ART-PRESS, 2005. 536 p.
3. Smirnov A.N. Nepreryvnaja razlivka stali (Continuous casting). Doneck: Cifrovaja tipografi ja, 2011. 482 p.
4. Rogler J. Modeling of inclusion removal in a tundish by gas bubbling: Doctor of Philosophy Electrical Engineering diss. Canada: Ryerson University, 2004. 54 p.
5. Smirnov A.N., Efimova V.G., Kravchenko A.V., Pismarev K.E. Naukovі pracі DonNTU. Serіja: Metalurgіja. 2011. Issue 13 (194). pp. 80 – 92.
6. Efimova V.G., Nogovicin A.V., Kravchenko A.V. Pro cessy lit’ja. 2013. № 2. pp. 60 – 67.
7. Smirnov A.N., Safonov V.M., Proskurenko D.V., Pismarev K.E. Jelektrometallurgija. 2009. № 7. pp. 17 – 22.
8. Reiter G., Schwerdfeger K. ISIJ International. 1992. Vol. 32. No. 1. pp. 50 – 56.
9. Han Z., Holappa L. ISIJ International. 2003. Vol. 43. No. 3. pp. 293 – 297.
10. Zhang L., Thomas B. XXIV National Steelmaking Symposium. 26-28 November. pp. 138 – 183.
11.
Review
For citations:
Smirnov A.N., Efimova V.G., Kravchenko A.V., Pismarev K.E. STUDYCONDITIONS OF NON-METALLIC INCLUSIONS FLOTATION DURING ARGON INJECTION OF LIQUID BATH TUNDISH CCM. REPORT 3. Izvestiya. Ferrous Metallurgy. 2014;57(3):17-23. (In Russ.) https://doi.org/10.17073/0368-0797-2014-3-17-23
Views:
791
Email this article 