STUDY OF STRESS-STRAIN STATE OF THE ROLLS DURING ROLLING OF BAND-BEAMIN THE STANDS OF UNIVERSAL BEAM MILL
https://doi.org/10.17073/0368-0797-2014-10-37-41
Abstract
The results of solving the problem of simultaneous determination of the stresses in the deformation zone and horizontal rolls in the rolling-beam in the stands universal beam mill are described. The regularities of the distribution of normal and tangential stresses in the deformation of the beam, and the voltage in the rolls of the rolling force are determined.
About the Author
O. S. Lekhov
Russian State Professional Pedagogical University (11, Mechanical Engineers str., Yekaterinburg, 620012, Russia)
Russian Federation
Dr. Sci. (Eng.), Professor
Russian Federation
Dr. Sci. (Eng.), Professor
References
1. Lekhov O.S., Komratov Yu.S. Sovmeshchennye protsessy nepreryvnogo lit’ya i deformatsii dlya proizvodstva prokata [The combined processes of continuous casting and deformation for production of rolled products]. Ekaterinburg: UGTU – UPI, 2009. 411 р. (In Russ.).
2. ANSIS. Structural Analysis Guide. Rel.6.0. Available at: http// www.cadfem.ru.
3. Komratov Yu.S., Lekhov O.S. Calculation of stresses from the rolling forces in the vertical and horizontal rolls of the universal stand-beam mill. Proizvodstvo prokata. 2007, no. 7, pp.17–19. (In Russ.).
4. Rabotnov Yu.I. Mekhanika deformiruemogo tverdogo tela [Mechanics of deformable solids]. Moscow: Nauka, 1979. 744 p. (In Russ.).
5.
Review
For citations:
Lekhov O.S. STUDY OF STRESS-STRAIN STATE OF THE ROLLS DURING ROLLING OF BAND-BEAMIN THE STANDS OF UNIVERSAL BEAM MILL. Izvestiya. Ferrous Metallurgy. 2014;57(10):37-41. (In Russ.) https://doi.org/10.17073/0368-0797-2014-10-37-41
Views:
580
Email this article 