RESEARCH OF HIGH-TEMPERATURE PLASTICITY OF CRYSTALLIZATION ZONES IN CONTINUOUSLY CAST INGOTS OF RAIL STEEL EH76F
https://doi.org/10.17073/0368-0797-2014-10-33-37
Abstract
The article presents the results of research of high-temperature plasticity of rail steel Eh76F in the range of temperatures between 950 – 1250 °С. It has been found out that the best results of plasticity with satisfactory microstructure were got when the temperature was 1150 °С.
About the Authors
A. S. Simachev
Siberian State Industrial University (42, Kirova str., Novokuznetsk, Kemerovo Region, 654007, Russia)
Russian Federation
Russian Federation
Leading Engineer
M. V. Temlyantсev
Siberian State Industrial University (42, Kirova str., Novokuznetsk, Kemerovo Region, 654007, Russia)
Russian Federation
Russian Federation
Dr. Sci. (Eng.), Professor
T. N. Oskolkova
Siberian State Industrial University (42, Kirova str., Novokuznetsk, Kemerovo Region, 654007, Russia)
Russian Federation
Russian Federation
Cand. Sci. (Eng.), Assist Professor
V. N. Peretyat’ko
Siberian State Industrial University (42, Kirova str., Novokuznetsk, Kemerovo Region, 654007, Russia)
Russian Federation
Russian Federation
Dr. Sci. (Eng.), Professor
V. I. Bazaikin
Siberian State Industrial University (42, Kirova str., Novokuznetsk, Kemerovo Region, 654007, Russia)
Russian Federation
Russian Federation
Dr. Sci. (Eng.), Professor
References
1. Bernshtein M.L., Dobatkin S.V., Kaputkina L.M., Prokoshkin S.D. Diagrammy goryachei deformatsii, struktura i svoistva stalei: Spravochnoe izdanie [Hot deformation: diagram, structure and properties of steel: Reference book]. Moscow: Metallurgiya, 1989. 544 p. (In Russ.).
2. Temlyantsev M.V., Gavrilov V.V., Korneva L.V., Syusyukin A.Yu., Temlyancev N.V. On the choice of reheat temperature regimes for continuously cast ingots rolling of rail electric steel. Izvestiya VuZov. Chernaya metallurgiya = Izvestiya – Ferrous Metallurgy. 2005, no. 5, pp. 47–49. (In Russ.).
3. Temlyantsev M.V., Gavrilov V.V., Korneva L.V., Syusyukin A.Yu., Temlyantcev N.V. Reheat for continuously cast ingots rolling of rail electric steel. Izvestiya VUZov. Chernaya metallurgiya = Izvestiya – Ferrous Metallurgy. 2005, no. 6, pp. 51–53. (In Russ.).
4. Temlyantsev M.V., Gavrilov V.V., Korneva L.V., Kozheurova L.T. On the choice of reheat temperature regimes for continuously cast ingots rolling of rail electric steel. Izvestiya VUZov. Chernaya metallurgiya = Izvestiya – Ferrous Metallurgy. 2005, no. 12, pp. 47–49. (In Russ.).
5. Dzugutov M.Ya. Plasticheskaya deformatsiya vysokolegirovannykh stalei i splavov [Plastic deformation of high-alloyed steel]. Moscow: Metallurgiya, 1977. 479 p. (In Russ.).
6. Simachev A.S. The influence of nonmetallics on high-temperature plasticity of continuously cast ingots of rail electric steel. Mezhdun arodnyi nauchno-issledovatel’skii zhurnal. 2014, no. 3 (22). Part 2, pp. 63, 64. (In Russ.).
7. Bashnin Yu. A., Ushakov B.K., Sekei A.G. Tehnologiya termicheskoi obrabotki stali. Uchebnik dlya vuzov [Heat treatment technologies of steel. Textbook for universities]. Moscow: Metallurgiya, 1986. 424 p. (In Russ.).
8. Peretyat’ko V.N., Temlyantcev M.V., Filippova M.V. Razvitie teorii i praktiki metallurgicheskikh tehnologii. T. 2. Plastichnost’ i razrushenie stali v protsessakh nagreva i obrabotki davleniem [The de-velopment of the theory and practice of metallurgical technologies. Vol. 2. Steel plasticity and destruction in the heating and forming processes]. Moscow: Teplotehnik, 2010. 352 p. (In Russ.).
9. Simachev A.S., Temlyantcev M.V., Oskolkova T.N. High-temperature plasticity of rail electric steel Eh76F. Vestnik gorno-metallurgicheskoi sektsii RAEN. 2014. Issue 16, pp. 79–82. (In Russ.).
10. Simachev A.S., Temlyantcev M.V., Oskolkova T.N. The research of high-temperature plasticity of rail electric steel Eh76F. Vestnik gornometallurgicheskoi sektsii RAEN. 2014. Issue 32, pp. 23–27. (In Russ.).
11. Pavlov V.V, Temlyantcev M.V., Korneva L.V., Oskolkova T.N., Gavrilov V.V. Defekty i kachestvo rel’sovoi stali: spravochnik [Defects and quality of rail steel: reference book]. Moscow: Teplotehnik, 2006. 218 p. (In Russ.).
12. Dzugutov M.Ya. Plastichnost’ i deformiruemost’ vysokolegirovannykh stalei i splavov [Plasticity and deformability of high-alloyed steels and alloys]. Moscow: Metallurgiya, 1990. 303 p. (In Russ.).
13. Temlyantcev M.V., Kolotov E.A., Syusyukin A.Yu., Gavrilov V.V. The development of heat technologies of rail feedstock in a continuous walking-beam furnace. Stal’. 2006, no. 12, pp. 33–35. (In Russ.).
14. Simachev A.S. Nonmetallic infl uences on high-temperature plasticity of continuously cast ingots of rail steel Eh76F. Sovremennye innovatsii v nauke i tehnike. 2014. Vol. 4, pp. 122–124. (In Russ.).
15. Velikanov A.V., Reyhart V.A., Kaportsev V.N. Impact of the methods of out-of-furnace treatment on the quality of rails from basic oxygen steel. In: Nemetallicheskie vklyucheniya v stalyakh [Non-metallic inclusions in steel]. Moscow: Metallurgiya, 1983, pp. 35–42. (In Russ.).
16.
Review
For citations:
Simachev A.S., Temlyantсev M.V., Oskolkova T.N., Peretyat’ko V.N., Bazaikin V.I. RESEARCH OF HIGH-TEMPERATURE PLASTICITY OF CRYSTALLIZATION ZONES IN CONTINUOUSLY CAST INGOTS OF RAIL STEEL EH76F. Izvestiya. Ferrous Metallurgy. 2014;57(10):33-37. (In Russ.) https://doi.org/10.17073/0368-0797-2014-10-33-37
Views:
735
Email this article 