THE TEST OF AIR TUYERES FOR BLAST FURNACES WITH BORON-CONTAINING COATINGS
https://doi.org/10.17073/0368-0797-2014-9-68-69
Abstract
The resistant boron-containing coatings with low thermal conductivity were used to enhance durability and to reduce heat losses through the air tuyeres. The possibility of solving the task was shown on the example of the trials of two experienced tuyeres.
About the Authors
A. G. Radyuk
National University of Science and Technology “MISIS” (MISIS) (4, Leninskii pr., Moscow, 119049, Russia)
Russian Federation
Russian Federation
Dr. Sci. (Eng.), Professor of the Chair “Technology and equipment for pipe production”
A. E. Titlyanov
National University of Science and Technology “MISIS” (MISIS) (4, Leninskii pr., Moscow, 119049, Russia)
Russian Federation
Russian Federation
Cand. Sci. (Eng.), Senior Researcher of the Chair “Technology and equipment for pipe production”
References
1. Titlyanov A.E., Radyuk A.G., Tikhonov S.M. etc. Sposob podgotovki k rabote furmy domennoi pechi [A method of preparing the lance of blast furnace for operation]. Patent RFno. 2303636, Byul. Izobretenii no. 21, 2007. (In Russ.).
2. Borodulin A.V., Vasil’ev A.P., Glushchenko E.L. etc. Avtomatizirovannye pechnye agregaty i energosberegayushchie tekhnologii v metallurgii: tr. II Mezhdunar. nauch.-prakt. konf. Moskva, MISiS, 3 – 5 dekabrya 2002 [Automated furnace units and energy-saving technologies in metallurgy: Proceedings of the II Intern. scientific-practical conf. Moscow, MISIS, December 3–5, 2002 ]. pp. 424–426. (In Russ.).
3.
Review
For citations:
Radyuk A.G., Titlyanov A.E. THE TEST OF AIR TUYERES FOR BLAST FURNACES WITH BORON-CONTAINING COATINGS. Izvestiya. Ferrous Metallurgy. 2014;57(9):68-69. (In Russ.) https://doi.org/10.17073/0368-0797-2014-9-68-69
Views:
554
Email this article 