ACCOUNTING OF DEFORMATION HEATING DURING COLD ROLLING OF TUBES
https://doi.org/10.17073/0368-0797-2014-9-64-66
Abstract
The authors proposed a method of quantitative estimation of heating temperature during cold rolling of tubes with specified performance. The formula for calculating the deformation heating is described resulting from the law of energy conservation during plastic deformation. As a result the authors showed an example of using the proposed formulas for evaluating the reduction effort rolling along a certain route. The possibility of intensification of rolling process by temperature heating is described.
About the Authors
G. A. Orlov
Ural Federal University named after the first President of Russia B.N. Yeltsin (19, Mira str., Ekaterinburg, 620002, Russia)
Russian Federation
Dr. Sci. (Eng.), Professor of the Chair “Metal Forming”
Russian Federation
Dr. Sci. (Eng.), Professor of the Chair “Metal Forming”
A. G. Orlov
Ural Federal University named after the first President of Russia B.N. Yeltsin (19, Mira str., Ekaterinburg, 620002, Russia)
Russian Federation
Russian Federation
Student
References
1. Tikhonov A.S. Elementy fiziko-khimicheskoi teorii deformiruemykh splavov [Elements of physical and chemical theory of wrought alloys]. Moscow: Nauka, 1972. 158 p. (In Russ.).
2. Shevakin Yu. F. Kalibrovka i usiliya pri kholodnoi prokatke trub [Calibration and effort during pipe cold rolling]. Moscow: Metallurgizdat, 1963. 269 p. (In Russ.).
3. Orlov G.A. Engineering assessment of plastic metal working. Izvestiya VUZov. Chernaya metallurgiya = Izvestiya – Ferrous Metallurgy. 2013, no. 3, pp. 11–14. (In Russ.).
4. Bogatov A.A., Mizhiritskii O.I., Smirnov S.V. Resurs plastichnosti metallov pri obrabotke davleniem [Resource plasticity of metals in processing of metals by pressure]. Moscow: Metallurgiya, 1984. 144 p. (In Russ.).
5. Migachev B.A., Potapov A.I. Plastichnost’ instrumental’nykh stalei (spravochnik) [Plasticity of tool steels]. Moscow: Metallurgiya, 1980. 88 p. (In Russ.).
6. Nemzer G.G. Tekhnologiya kuznechno-shtampovochnogo proizvodstva [Technology of forging and stamping production]. Leningrad: Mashinostroenie, 1988. 320 p. (In Russ.)
7.
Review
For citations:
Orlov G.A., Orlov A.G. ACCOUNTING OF DEFORMATION HEATING DURING COLD ROLLING OF TUBES. Izvestiya. Ferrous Metallurgy. 2014;57(9):64-66. (In Russ.) https://doi.org/10.17073/0368-0797-2014-9-64-66
Views:
681
Email this article 