CALCULATION OF ENERGY-POWER PARAMETERS OF BENDING PROCESS IN PRODUCTION OF WELDED PIPES FOR GAS PIPELINES
https://doi.org/10.17073/0368-0797-2014-7-39-42
Abstract
The authors suggested the technique of аpplication of velocity fields and contact interaction in the calculation of energy-power parameters based on the analysis of the process of hemming the edges of sheet blanks on presses. The calculation of maximum bending efforts demonstrates the ability to use formulas for engineering calculations.
About the Authors
G. P. Zhigulev
National Research Technological University MISIS (Leninskii pr., 4, Moscow, 119049, Russia)
Russian Federation
Russian Federation
Cand. Eng., Assist. Professor
S. V. Samusev
National Research Technological University MISIS (Leninskii pr., 4, Moscow, 119049, Russia)
Russian Federation
Russian Federation
Dr. Eng., Professor
V. A. Fadeev
National Research Technological University MISIS (Leninskii pr., 4, Moscow, 119049, Russia)
Russian Federation
Russian Federation
Engineer
F. H. Faizulaev
National Research Technological University MISIS (Leninskii pr., 4, Moscow, 119049, Russia)
Russian Federation
Russian Federation
Master student
References
1. Johnson W., Kudo H. The mechanics of metal extrusion. Manchester University Press, 1962, 226 p. (Russ. ed.: Johnson W., Kudo H. Mekhanika protsessa vydavlivaniya metalla. Moscow: Metallurgiya, 1985).
2. Alyushin Yu.A. Metod verkhnei otsenki i ego primenenie pri reshenii zadach obrabotki metallov davleniem [Upper bound method and its application in solving the problems of metal forming]. Rostov-on-Don, RISKhM, 1977. P.75. (In Russ.).
3. Samusev S.V., Lyuskin A.V., Romantsov A.I. etc. Development of the methodology for calculating the parameters of the instrument to unify groups of welded pipe at section of edge bending press. Izvestiya VUZov. Chernaya metallurgiya = Izvestiya – Ferrous Metallurgy. No. 3, 2013. Pp. 20–22. (In Russ.).
4. Samusev S.V., Tovmasyan M.A., Khlybov O.S. etc. Application of photogrammetry and laser scanning for 3D-profi le measuring of instrument for edge bending press line TESA 1420. “Vyksa Steel Works”. Proizvodstvo prokata. No. 2, 2014, pp. 40–42. (In Russ.).
5. Samusev S.V., Zhigulev G.P., Romantsov A.I. etc. Kinematic parameters of elastoplastic deformation in bending the marginal portions of plates based on modeling system DEFORM 2D-3D. Trudy Mezhdunarodnogo foruma ”Inzhenernye sistemy – 2012”. Inzhiniringovaya kompaniya ”TESIS” [Proceedings of the International Forum “Engineering Systems -2012”, Engineering company “Tesis”]. Moscow: Maks Press, 2012. Pp. 209–213. (In Russ.).
6.
Review
For citations:
Zhigulev G.P., Samusev S.V., Fadeev V.A., Faizulaev F.H. CALCULATION OF ENERGY-POWER PARAMETERS OF BENDING PROCESS IN PRODUCTION OF WELDED PIPES FOR GAS PIPELINES. Izvestiya. Ferrous Metallurgy. 2014;57(7):39-42. (In Russ.) https://doi.org/10.17073/0368-0797-2014-7-39-42
Views:
993
Email this article 