THE GEOMETRICAL PARAMETERS OF THE CUPOLA AND THE HEIGHT OF THE CHARGE COLUMN WHEN REPLACING COKE AND ANTHRACITE OR LEAN COALS
https://doi.org/10.17073/0368-0797-2013-11-68-69
Abstract
When replacing coke and anthracite coals lean in cupola melting to consider increasing the likelihood of cracking of coal due to its low thermal resistance. Technologically steady state smelting with anthracite and lean coal is provided by the work of the recommended ratio between the height of the cupola and its diameter and heating the blast in the recuperator “pipe in pipe”.
About the Author
A. V. Feoktistov
Сибирский государственный индустриальный университет
Russian Federation
Russian Federation
References
1. Селянин И.Ф., Феоктистов А.В., Бедарев С.А. Теория и практика интенсификации технологического процесса в шахтных печах малого диаметра. В 3-х т. Т. 1. – М.: Теплотехник, 2010. – 379 с.
2. Чуханов З.Ф. Некоторые проблемы топлива и энергетики. – М.: Изд-во АН СССР, 1961. – 478 с.
Review
For citations:
Feoktistov A.V. THE GEOMETRICAL PARAMETERS OF THE CUPOLA AND THE HEIGHT OF THE CHARGE COLUMN WHEN REPLACING COKE AND ANTHRACITE OR LEAN COALS. Izvestiya. Ferrous Metallurgy. 2013;56(11):68-69. (In Russ.) https://doi.org/10.17073/0368-0797-2013-11-68-69
Views:
420
Email this article 