PUNCHING FORGINGS «CROSSPIECE» FROM BALL BLANKS
https://doi.org/10.17073/0368-0797-2014-8-24-28
Abstract
The new extruding technology of forging of «crosspiece» type from a ball blank subjected to two-sided force has been developed. The study of the stress-strain state of the metal has been conducted. The pilot batch of high quality forgings of «crosspiece» type for cardan shaft of the vehicle has been produced.
About the Authors
M. V. Filippova
Siberian State Industrial University (42, Kirova str., Novokuznetsk, Kemerovo Region, 654007, Russia)
Russian Federation
Cand. Sci. (Eng.) Assist. Professor
Russian Federation
Cand. Sci. (Eng.) Assist. Professor
V. N. Peretayt’ko
Siberian State Industrial University (42, Kirova str., Novokuznetsk, Kemerovo Region, 654007, Russia)
Russian Federation
Russian Federation
Dr. Sci. (Eng.), Professor
А. А. Fedorov
Siberian State Industrial University (42, Kirova str., Novokuznetsk, Kemerovo Region, 654007, Russia)
Russian Federation
Cand. Sci. (Eng.), Assist. Professor
Russian Federation
Cand. Sci. (Eng.), Assist. Professor
A. S. Klimov
Siberian State Industrial University (42, Kirova str., Novokuznetsk, Kemerovo Region, 654007, Russia)
Russian Federation
Posgraduate
Russian Federation
Posgraduate
References
1. Eduardov M.S. Shtampovka v zakrytykh shtampakh [Closed-die forging]. Moscow: Mashinostroenie, 1971. 240 p. (In Russ.).
2. Oskolkov A.I., Maksimov A.A., Poksevatkin M.I., Peretyat'ko V.N. etc. Sposob shtampovki pokovok tipa krestovin [Forming method of forgings of Crossings type]. Patent RF no. 2165329. Byul. Izobretenii, no. 4, 2001. (In Russ.).
3. Filippova M.V., Bakhaev A.V., Peretyat'ko V.N., Fedorov A.A. Ball billet die forming in formed hot modeling. Izvestiya VUZov. Chernaya metallurgiya = Izvestiya – Ferrous Metallurgy. 2011, no. 10, pp. 24–27. (In Russ.).
4. Peretyat'ko V.N., Bakhaev A.V., Filippova M.V. Modeling of axially symmetric forging die stamp process. Izvestiya VUZov. Chernaya metallurgiya = Izvestiya – Ferrous Metallurgy. 2010, no. 4, pp. 27–29. (In Russ.).
5. Peretyat’ko V.N., Bakhaev A.V., Filippova M.V., Vakhman S.A. Stamping axisymmetric forgings. Steel in Translation. 2009. Vol. 39, no. 4, pp. 300–301.
6. Tselikov A.I., Barbarin M.V., Vasil’chikovM.V. etc. Spetsial’nye prokatnye stany [Special mills]. Moscow: Metallurgiya, 1971. 336 p. (In Russ.).
7. Peretyat'ko V.N., Filippova M.V., Klimov A.S. etc. Ball blank. Zagotovitel'noe proizvodstvo v mashinostroenii. 2012, no. 3, pp. 17–19. (In Russ.).
8. Peretyat'ko V.N., Fedorov A.A. Shtamp dlya goryachei shtampovki pokovok tipa krestovina iz sharovoi zagotovki [Stamp for hot stamping forgings of crossings type from ball blank]. Patent RF na poleznuju model’ RF, MPK V21K. Byul. Izobretii, no. 1, 2010. (In Russ.).
9. Ovchinnikov A.G. Osnovy teorii shtampovki vydavlivaniem na pressakh [The theory fundamentals of extruding presses]. Moscow: Mashinostroenie, 1983. 197 p.
10. Peretyat'ko V.N., Bakhaev A.V., Filippova M.V., Vakhman S.A. Hot forming of axially symmetric forgings. Izvestiya VUZov. Chernaya metallurgiya = Izvestiya – Ferrous Metallurgy. 2009, no. 4, pp. 21–22. (In Russ.).
11.
Review
For citations:
Filippova M.V., Peretayt’ko V.N., Fedorov А.А., Klimov A.S. PUNCHING FORGINGS «CROSSPIECE» FROM BALL BLANKS. Izvestiya. Ferrous Metallurgy. 2014;57(8):24-28. (In Russ.) https://doi.org/10.17073/0368-0797-2014-8-24-28
Views:
680
Email this article 