Contents
Scroll to:
Index of articles “Izvestiya. Ferrous Metallurgy” for 2024, Vol. 67
For citations:
Article E. Index of articles “Izvestiya. Ferrous Metallurgy” for 2024, Vol. 67. Izvestiya. Ferrous Metallurgy. 2024;67(6):744-749.
History of Metallurgy
 | Rudskoi A.I., Kodzhaspirov G.E. History and current state of metallurgy in St. Petersburg | 5 |
Metallurgical Technologies
| Chichenev N.A., Gorbatyuk S.M., Solomonov K.N., Snitko S.A., Chicheneva O.N. Investigation of changes in temperature of pressing tool during laser processing | 2 |
| Fedorov S.A., Udoeva L.Yu., Pikulin K.V., Vusikhis A.S., Cherepanova L.A. Joint processing of perovskite and ilmenite concentrates. Part 1. Chemicalmineralogical (material) characteristics of perovskite and ilmenite concentrates | 1 |
| Grudinsky P.I., Yurtaeva A.A., Volkov A.I., Dyubanov V.G. A study on processing of blast furnace dust and sludge using reduction roasting and magnetic separation | 5 |
| | Ivannikov A.Yu., Yusupov V.S. Recent development in powder metallurgy of high entropy alloys for high-temperature applications. Brief review | 5 |
| | Kal’ko A.A., Leont’ev L.I., Volkov E.A. Assessment of the effectiveness of technological measures to extend the campaign of blast furnace No. 5 of PJSC Severstal (2006 – 2024) based on an examination of its working space during a first-category overhaul | 5 |
| Kal’ko A.A., Vinogradov E.N., Kal’ko O.A., Kal’ko A.A. Development and implementation of technological measures to extend the campaign of blast furnace No. 5 of PJSC Severstal | 3 |
| Konyukhov Yu.V., Khanna R., Maslennikov N.A., Li K., Liang Z., Burmistrov I.N., Karpenkov D.Yu., Kashevskii S.V., Kravchenko M.V. Application of low-temperature reduction by hydrogen for enhancing the magnetic characteristics of several iron ores | 6 |
| Murysev V.A., Sheshukov O.Yu., Safonov V.M., Somov S.A., Metelkin A.A., Egiazar’yan D.K. Assessment of homogeneity of ladlefurnace refining slag by calculation and experimental methods | 2 |
| Olifirenko I.A., Oskolkova T.N., Polevoi E.V. On the results of tribological studies of railway rails | 6 |
| Pavlovets V.M. Possibilities of heat-power spraying of wet charge during formation of structural properties of agglomerated iron ore materials | 1 |
| Puspasari V., Astawa I.N.G.P., Herbirowo S., Mabruri E. Mechanical properties and microstructure of Al–Mg (5052) alloy processed by equal-channel angular pressing (ECAP) with variation of ECAP routes and heat treatment | 1 |
| Rybenko I.A., Nokhrina O.I., Rozhikhina I.D., Golodova M.A. Thermodynamic modeling of cobalt and nickel reduction using hydrometallurgical enrichment concentrates for steel alloying | 4 |
| Shkirmontov A.P. Sub-electrode gap and specific electrical resistance of a ferroalloy furnace bath | 6 |
| Stuk T.S., Pototskii E.P. Estimation of accident rate of blast furnace tuyeres | 2 |
| Umanskii A.A., Baidin V.V., Simachev A.S. Influence of chemical composition of steels for production of grinding balls on their deformation characteristics | 6 |
| Vityaz’ P.A., Zalesskii V.G., Pokrovskii A.I. Features of iron foundry production in Belarus and its prospects | 1 |
| Vydrin A.V., Krasikov A.V., Korsakov A.A., Geim E.A. Functional properties of plastic deformation resistance of 12Kh18N10T steel | 6 |
Resourse Saving in Ferrous Metallurgy
| Akuov A.M., Kelamanov B.S., Zayakin O.V., Samuratov E.K., Yessengaliyev D.A. Influence of additives on properties of highcarbon ferrochrome slag | 2 |
| Wang W., Li S., Xu W., Chikova O.A., Zhang Y. Energy saving model for related processes in steelmaking | 3 |
Ecology and Rational Use of Natural Resourses
| Belanov I.P., Shipilova A.M., Mezentseva O.P. ineralogical and granulometric composition of soils formed on the surface of iron ore tailings dumps | 5 |
| Kleonovskii M.V., Sheshukov O.Yu., Mikheenkov M.A., Mikheenkov A.M., Matyukhin O.V. Effect of mechanical processing on reduction of iron oxides in man-made raw materials | 6 |
| Rybenko I.A., Rozhikhina I.D., Nokhrina O.I., Golodova M.A. Rational application of high quality manganese concentrate | 2 |
Superduty Steel
| Fedorov A.S., Karasev V.S., Alekseeva E.L., Al’khimenko A.A., Shaposhnikov N.O. Problems of selection of corrosion-resistant steels and alloys in oil and gas industry for operating conditions | 3 |
| Saulin D.V., Kuzminykh K.G., Poilov V.Z. Determination of hydrogen influence on microhardness and microstructure characteristics of aviation alloys | 3 |
Material Science
| Anosov M.S., Sorokina S.A., Chernigin M.A., Mordovina Yu.S. Effect of heat treatment on structure of austenitic steel 07Cr25Ni13 obtained by WAAM | 3 |
| Astafurov S.V., Mel’nikov E.V., Astafurova E.G., Kolubaev E.A. Phase composition and microstructure of intermetallic alloys obtained using electron-beam additive manufacturing | 4 |
| Buyakova S.P., Kayurov K.N., Barannikova S.A. Inhomogeneity of deformation of surfaced stainless steel | 6 |
| Danilov V.I., Orlova D.V., Shlyakhova G.V., Mironov Yu.P., Petrova E.D. Structural-phase composition and mechanical properties of stainless steel – low carbon steel metal composite | 6 |
| Em A.Yu., Komolova O.A., Grigorovich K.V., Rumyantseva S.B. Formation of non-metallic inclusions in production of 08Kh18N10T corrosion-resistant steel | 5 |
| Efimov M.O., Panchenko I.A., Shlyarova Yu.A. Gradient of microhardness in the contact zone coating (HEA CoCrFeNiMn) – substrate (alloy 5083) | 4 |
| Galkin A.A., Kabaldin Yu.G., Mordovina Yu.S., Anosov M.S. Low-cycle fatigue of welded joint from steel of X70 strength class | 4 |
| Gordienko A.I., Abdulmenova E.V., Kozlova T.V., Gomorova Yu.F., Vlasov I.V., Fotin I.A., Kayurov K.N., Buyakova S.P. Effect of heat treatment modes on structure and properties of 08Kh18N6AG10S steel | 2 |
| Gostevskaya A.N., Markidonov A.V., Starostenkov M.D., Lubyanoi D.A. Simulation of structural changes in metal under high-intensity external influence | 5 |
| Gromov V.E., Chapaikin A.S., Bashchenko L.P. Structural-phase states and properties of high-speed surfacing after tempering and electron beam processing | 5 |
| Gromov V.E., Konovalov S.V., Efimov M.O., Panchenko I.A., Chen X. Improvement of the Cantor alloy’s mechanical properties by alloying with niobium and zirconium | 1 |
| Gromov V.E., Konovalov S.V., Efimov M.O., Panchenko I.A., Shlyarov V.V. Ways to improve the properties of high-entropy alloys Cantor CoCrFeNiMn and CoCrFeNiAl | 3 |
| Ivanov I.V., Akkuzin S.A., Safarova D.E., Litovchenko I.Yu., Bataev I.A. Evolution of dislocation structure and phase composition of deformed Al0.3CoCrFeNi highentropy alloy during heating | 2 |
| Ivanov Yu.F., Petrikova E.A., Teresov A.D., Lopatin I.V., Tolkachev O.S. Complex electron-ion-plasma surface modification of high-alloy stainless steel | 4 |
| Kabaldin Yu.G., Chernigin M.A. Structure and its defects in additive manufacturing of stainless steels by laser melting and electric arc surfacing | 1 |
| Kantyukov R.R., Zapevalov D.N., Vagapov R.K. Effect of hydrogen on steels in hydrogen sulfide-containing and other environments at gas facilities | 1 |
| Kolubaev A.V., Sizova O.V. Structure and properties of coatings obtained by gas-thermal spraying | 6 |
| Kostina V.S., Kostina M.V., Zinoveev D.V., Kudryashov A.E. Calculations of the phase composition of austenitic high-nitrogen welding wire and study of a welded joint made from it | 3 |
| Kryzhevich D.S., Korchuganov A.V., Zolnikov K.P. Grain boundary migration and mechanical properties altering in Fe – 10Ni – 20Cr alloy under irradiation | 3 |
| Mantserov S.A., Anosov M.S., Mordovina Yu.S., Chernigin M.A. Effect of 3D printing mode on structure and fatigue strength of 30CrMnSi steel | 6 |
| Nevskii S.A., Bashchenko L.P., Gromov V.E., Peregudov O.A., Gostevskaya A.N., Volodin T.V. Formation of the gradient of structuralphase states of highspeed steel during surfacing. Part 2. The role of the Mullins–Sekerka instability in formation of crystallization structures | 2 |
| Nikonenko A.V., Vorontsov A.V., Shamarin N.N., Utyaganova V.R., Savchenko N.L., Zykova A.P. Structu-ral-phase state and properties of 56GM/(W + WC(Ni)) composite alloy obtained by wire electron beam additive manufacturing | 6 |
| Orlova D.V., Danilov V.I., Gorbatenko V.V., Danilova L.V., Bochkareva A.V. Kinetics of deformation fronts during serrated Lüders deformation in α-iron at high temperature | 3 |
| Permyakova I.E., Kostina M.V. Deformation and fracture of heat treated ribbon of amorphous Co– Fe – Cr – Si – B alloy during indentation | 5 |
| Polikevich K.B., Petelin A.L., Plokhikh A.I., Fomina L.P. Nitrogen diffusion along the layer boundaries after nitriding of multilayer materials | 3 |
| Popova N.A., Gromov V.E., Yur’ev A.B., Martusevich E.A., Porfir’ev M.A. Physics of hardening of the rolling surface of rail head from hypereutectoid steel after operation | 4 |
| Popova N.A., Nikonenko E.L., Porfir’ev M.A., Kryukov R.E. Internal stresses and their sources in steels with BCC lattice | 2 |
| Pustovoit V.N., Dolgachev Yu.V., Egorov M.S., Vernigorov Yu.M. Influence of inhomogeneities in chemical composition and porosity of sintered steel on development of martensitic transformation | 4 |
| Shlyakhova G.V., Danilov V.I. Effect of electric arc surfacing on the structure and properties of coatings | 4 |
| Spiridonova K.V., Litovchenko I.Yu., Polekhina N.A., Osipova V.V., Akkuzin S.A., Chernov V.M. Impact strength and fracture features of 12 % chromium ferritic-martensitic steel EP-823 in temperature range from –196 to 100 °С | 6 |
| Zorya I.V., Poletaev G.M., Bebikhov Yu.V., Semenov A.S. Molecular dynamics study of the influence of carbon impurity on austenite nanoparticles crystallization during rapid cooling | 4 |
Innovation in Metallurgical Industrial and Laboratory Equipment, Technologies and Materials
| Bogdanova N.A., Zhilin S.G. Influence of compression modes of waxy powders on stress-strain state of compacts used in precision casting | 5 |
| Fastykovskii A.R., Vakhrolomeev V.A., Nikitin A.G. Determination of longitudinal stability of strip in rolling cage – non-drive dividing device system | 3 |
| Lekhov O.S., Mikhalev A.V., Nepryakhin S.O. Stress state of billet – mandrel system during production of hollow steel billet in a unit of continuous casting and deformation. Part 2 | 4 |
| Leont’ev A.S., Rybenko I.A. Experience in implementing machine learning to calculate the quality and production of agglomerate | 1 |
| Morozov A.O., Komolova O.A., Em A.Yu., Zhemkov A.A., Grigorovich K.V., Yakubenko E.V., Cherkashina T.I., Dagman A.I. Development of a methodology for determining the content of non-metallic inclusions in steel | 4 |
| Nefedov A.V., Ishmukhametov R.E., Chichenev N.A. Re-engineering of ball mill at Novotroitsk Plant of Chromium Compounds | 6 |
| Nikitin A.G., Bazhenov I.A., Kurochkin N.M. Improving the efficiency of raw material preparation for metallurgical processing | 5 |
| Nikitin A.G., Fastykovskii A.R., Gerasimov S.P. Improving operation of a drawing mill | 6 |
| Odinokov V.I., Evstigneev A.I., Dmitriev E.A., Namokonov A.N., Evstigneeva A.A., Chernyshova D.V. Stress strain state of ceramic shell mold during formation of spherical steel casting in it. Part 1 | 2 |
| Odinokov V.I., Evstigneev A.I., Dmitriev E.A., Namokonov A.N., Evstigneeva A.A., Chernyshova D.V. Stressstrain state of ceramic shell mold during formation of spherical steel casting in it. Part 2 | 4 |
| Tkacheva A.V., Abashkin E.E. Influence of combined thermal effect of electric arc welding with aluminothermic backfill on internal stresses in a steel plate | 5 |
Physico-chemical Basics of Metallurgical Processes
| Adilov G., Kareva N.T., Roshchin V.E. Influence of copper and silicon on phase transformations in the iron – carbon system | 1 |
| Babenko A.A., Zhuchkov V.I., Kel’ I.N., Upolovnikova A.G., Shartdinov R.R. Thermodynamic modeling of interphase distribution of chromium and boron in slags of AOD reduction period | 3 |
| Bashchenko L.P., Bendre Yu.V., Kozyrev N.A., Mikhno A.R., Shurupov V.M., Zhukov A.V Thermodynamic aspects of WO3 tungsten oxide reduction by carbon, silicon, aluminum and titanium | 4 |
| Bolgaru K.A., Reger A.A., Vereshchagin V.I., Akulinkin A.A. Physical and chemical processes during nitriding of chromium ferrosilicon by filtration combustion | 3 |
| Goikhenberg Yu.N., Polukhin D.S. Effect of silicon and vanadium on corrosion-mechanical properties of highnitrogen Cr – Mn steels | 5 |
| Protopopov E.V., Rybenko I.A., Belenetskii E.A. Thermodynamic modeling of converter sludge sintering | 6 |
| Tsepelev V.S., Sinitsin N.I., Chikova O.A., Potapov M.G., V’yukhin V.V. Microheterogeneous structure of liquid cast irons IChKh28N2 and ICh310Kh24M2F4TR | 5 |
| Upolovnikova A.G.., Shartdinov R.R., Smetannikov A.N. Effect of basicity on physical properties of ladle slags of CaO ‒ SiO2 ‒ Ce2O3 ‒ Al2O3 ‒ MgO system | 2 |
Information Technologies and Automatic Control
in Ferrous Metallurgy
| Belomyttsev M.Yu. Type of generalized mathematical model for describing large hot deformations | 5 |
| Erokhov T.V., Levitskii I.A., Podgorodetskii G.S., Gorbunov V.B. Mathematical modeling of gas dynamics and off-gas post-combustion above the melt in a meltergasifier furnace | 1 |
| Kornet M.E., Zimin A.V., Burkova I.V., Zimin V.V. Planning BOF repair system in conditions of quasi-periodic operation of units | 6 |
| Panasenko O.A., Khalezov A.O., Nukhov D. Sh. Investigating the effectiveness of changing calibration of input cone of rolls and lines of a piercing mill with tapered rolls using computer modeling | 1 |
| Ryabchikov M.Yu., Ryabchikova E.S., Novak V.S., Klimenko A.E. Investigation of performance limitations in continuous hot-dip galvanizing units associated with product defects | 1 |
| Shper V.L., Sheremetyeva S.A., Smelov V.Yu., Khunuzidi E.I. Shewhart control charts – A simple but not easy tool for data analysis | 1 |
| Sivtsov A.V., Sheshukov O.Yu., Egiazar’yan D.K., Tsymbalist M.M., Orlov P.P. Automated process control in electric arc furnaces in the aspect of digital twin technology | 4 |
| Spirin N.A., Gurin I.A., Lavrov V.V., Zainullin L.A. Information modeling system for movement of charge layers and melt accumulation in a blast furnace well | 2 |
| Vargin A.V., Levitskii I.A. Mathematical modeling of slab heating in a furnace with walking beams due to their curvature | 3 |
Based on the Materials of the International Conference
“Scientific and Practical School for Young Metallurgists”
| Karasev V.S., Kodzhaspirov G.E., Fedorov A.S, Al’khimenko A.A., Zhitenev A.I. Increasing the corrosion properties of duplex steel with REM modification | 2 |
| Rovbo A.S., Golubev I.A., Shaposhnikov N.O., Penigin A.V., Fedorov A.S. Approaches to the selection of material design of infrastructure facilities for transport and injection of СО2 | 2 |
| Salynova M.A., Uglunts T.V., Tolochko O.V. Effect of yttrium additions on microstructure and corrosion resistance of Incoloy 825 alloy | 1 |
| In memory Yusfin Yulian Semyonovich | 4 |
| To the 75th Anniversary of Nikolai Aleksandrovich Spirin | 5 |
| To the 90th Anniversary of Leonid Andreevich Smirnov | 4 |
| To the 90th Anniversary of Leopol’d Igorevich Leont’ev | 6 |
| To the 100th Anniversary of Vuli Arshakovich Grogoryan | 1 |
Review
For citations:
Article E. Index of articles “Izvestiya. Ferrous Metallurgy” for 2024, Vol. 67. Izvestiya. Ferrous Metallurgy. 2024;67(6):744-749.
Views:
137
Email this article 