TECHNICAL RE-VERTICAL CHAMBER FURNACES FOR HEAT TREATMENT OF LARGE FORGINGS
https://doi.org/10.17073/0368-0797-2013-9-38-42
Abstract
Uralmashzavod is used as basis to assess technical re-equipment of chamber vertical heat-treatment furnace with applying modern technologies of furnace-building and modern materials. The calculation of thermal balances and furnace primary performance characteristics was made before and after re-equipment. Significant improvement of furnace performance characteristics after technical re-equipment was confirmed.
About the Authors
D. I. Spitchenko
Уральский Федеральный Университет
Russian Federation
Russian Federation
A. M. Vohmyakov
Уральский Федеральный Университет
Russian Federation
Russian Federation
E. V. Kiselev
Уральский Федеральный Университет
Russian Federation
Russian Federation
M. D. Kazyaev
Уральский Федеральный Университет
Russian Federation
Russian Federation
D. M. Kazyaev
ООО «НПК «УралТермоКомплекс»
Russian Federation
Russian Federation
References
1. Теплотехнические расчеты металлургических печей / Б.И. Китаев, Б.Ф. Зобнин и др. – М.: Металлургия, 1970. – 528 с.
2. Теория и практика теплогенерации / С.Н. Гущин, М.Д. Казяев, Ю.В. Крюченков и др. – Екатеринбург: УГТУ, 2005. – 379 с.
Review
For citations:
Spitchenko D.I., Vohmyakov A.M., Kiselev E.V., Kazyaev M.D., Kazyaev D.M. TECHNICAL RE-VERTICAL CHAMBER FURNACES FOR HEAT TREATMENT OF LARGE FORGINGS. Izvestiya. Ferrous Metallurgy. 2013;56(9):38-42. (In Russ.) https://doi.org/10.17073/0368-0797-2013-9-38-42
Views:
535
Email this article 