Investigating effectiveness of changing calibration of input cone of rolls and lines of a piercing mill with tapered rolls using computer modeling | Panasenko | Izvestiya. Ferrous Metallurgy

Izvestiya. Ferrous Metallurgy
Izvestiya vuzov. Chernaya metallurgiya

ISSN 0368-0797 (Print)
ISSN 2410-2091 (Online)

eng | рус

Preview

Izvestiya. Ferrous Metallurgy

Advanced search

Archives

Download this PDF file

For citations:

Panasenko O.A., Khalezov A.O., Nukhov D.Sh. Investigating effectiveness of changing calibration of input cone of rolls and lines of a piercing mill with tapered rolls using computer modeling. Izvestiya. Ferrous Metallurgy. 2024;67(1):106-111. https://doi.org/10.17073/0368-0797-2024-1-106-111

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 License.

ISSN 0368-0797 (Print)
ISSN 2410-2091 (Online)

* not an advertisement

Indexing Databases

* not an advertisement

Editor-in-Chief

Leont’ev L.I.

Article Tools

Finding References

Email this article (Login required)

Email the author (Login required)

About the Authors

O. A. Panasenko
JSC “Severskii Tube Steelworks”
Russian Federation

Oleg A. Panasenko, Head of the Pipe Rolling Laboratory of the Research Center

7 Vershinina Str., Polevskoi, Sverdlovsk Region 623388, Russian Federation

A. O. Khalezov
Ural Federal University named after the first President of Russia B.N. Yeltsin
Russian Federation

Aleksandr O. Khalezov, Postgraduate of the Chair “Metal Forming”

19 Mira Str., Yekaterinburg 620002, Russian Federation

D. Sh. Nukhov
Ural Federal University named after the first President of Russia B.N. Yeltsin
Russian Federation

Danis Sh. Nukhov, Cand. Sci. (Eng.), Assist. Prof. of the Chair “Metal Forming”

19 Mira Str., Yekaterinburg 620002, Russian Federation

Notifications