STUDY OF “CAKE” DEFECT IN CONTINUOUSLY CAST AUSTENITIC STAINLESS STEEL 18CR-10NI-1TI. REPORT 1
https://doi.org/10.17073/0368-0797-2013-7-19-22
Abstract
The structure of “cake” defect is a porous metal matrix with numerous inclusions: slag inclusions, coarse clusters of titanium nitrides and carbonitrides and complex composition oxides. Contamination of metal by deoxidation products, oxidation of the metal stream during casting increases the probability of formation of refractory phase in the form of a cluster of titanium nitride particles and the emergence of “cakes”.
About the Authors
O. K. Tokovoy
Южно-Уральский государственный университет
Russian Federation
Russian Federation
D. V. Shaburov
ОАО «Челябинский металлургический комбинат»
Russian Federation
Russian Federation
References
1. Левада А.Г., Макаров Д.Н., Антонов В.И., Токовой О.К. //Сталь. 2008. № 3. С. 74 – 75.
2. Левада А.Г., Антонов В.И., Токовой О.К., Фомченко С.М. // Металлург. 2008. № 6. С. 43 – 45.
3. Левада А.Г., Антонов В.И., Токовой О.К., Фомченко С.М. // Сталь. 2008. № 3. С. 40 – 43.
Review
For citations:
Tokovoy O.K., Shaburov D.V. STUDY OF “CAKE” DEFECT IN CONTINUOUSLY CAST AUSTENITIC STAINLESS STEEL 18CR-10NI-1TI. REPORT 1. Izvestiya. Ferrous Metallurgy. 2013;56(7):19-22. (In Russ.) https://doi.org/10.17073/0368-0797-2013-7-19-22
Views:
633
Email this article 