N. V. Podusovskaya
Baikov Institute of Metallurgy and Materials Science, Russian Academy of Sciences; National University of Science and Technology “MISIS”
Russian Federation

Nadezhda V. Podusovskaya, Junior Researcher of the Laboratory of Materials Diagnostics, Baikov Institute of Metallurgy and Materials Science, Russian Academy of Sciences; Postgraduate of the Chair of Metallurgy of Steel, New Production Technologies and Metal Protection, National University of Science and Technology “MISIS”

49 Leninskii Ave., Moscow 119991, Russian Federation

4 Leninskii Ave., Moscow 119049, Russian Federation

O. A. Komolova
Baikov Institute of Metallurgy and Materials Science, Russian Academy of Sciences; National University of Science and Technology “MISIS”
Russian Federation

Ol’ga A. Komolova, Cand. Sci. (Eng.), Senior Researcher of the Laboratory of Materials Diagnostics, Baikov Institute of Metallurgy and Materials Science, Russian Academy of Sciences; Assist. Prof. of the Chair of Metallurgy of Steel, New Production Technologies and Metal Protection, National University of Science and Technology “MISIS”

49 Leninskii Ave., Moscow 119991, Russian Federation

4 Leninskii Ave., Moscow 119049, Russian Federation

K. V. Grigorovich
Baikov Institute of Metallurgy and Materials Science, Russian Academy of Sciences; National University of Science and Technology “MISIS”
Russian Federation

Konstantin V. Grigorovich, Academician, Dr. Sci. (Eng.), Head of the Laboratory of Materials Diagnostics, Baikov Institute of Metallurgy and Materials Science, Russian Academy of Sciences; Prof. of the Chair of Metallurgy of Steel, New Production Technologies and Metal Protection, National University of Science and Technology “MISIS”

49 Leninskii Ave., Moscow 119991, Russian Federation

4 Leninskii Ave., Moscow 119049, Russian Federation

A. V. Pavlov
National University of Science and Technology “MISIS”
Russian Federation

Aleksandr V. Pavlov, Dr. Sci. (Eng.), Prof. of the Chair of Metallurgy of Steel, New Production Technologies and Metal Protection

4 Leninskii Ave., Moscow 119049, Russian Federation

V. V. Aksenova
National University of Science and Technology “MISIS”
Russian Federation

Viktoriya V. Aksenova, Postgraduate of the Chair of Metallurgy of Steel, New Production Technologies and Metal Protection

4 Leninskii Ave., Moscow 119049, Russian Federation

B. A. Rumyantsev
Baikov Institute of Metallurgy and Materials Science, Russian Academy of Sciences
Russian Federation

Boris A. Rumyantsev, Cand. Sci. (Eng.), Research Associate of the Laboratory of Materials Diagnostics

49 Leninskii Ave., Moscow 119991, Russian Federation

M. V. Zheleznyi
Baikov Institute of Metallurgy and Materials Science, Russian Academy of Sciences; National University of Science and Technology “MISIS”
Russian Federation

Mark V. Zheleznyi, Junior Researcher of the Laboratory of Materials Diagnostics, Baikov Institute of Metallurgy and Materials Science, Russian Academy of Sciences; Assistant of the Chair of Physical Materials, National University of Science and Technology “MISIS”

49 Leninskii Ave., Moscow 119991, Russian Federation

4 Leninskii Ave., Moscow 119049, Russian Federation