THE INFLUENCE OF GAPS IN BEARINGS ON THE RELIABILITY OF THE ROLL CRUSHER
https://doi.org/10.17073/0368-0797-2014-4-65-67
Abstract
The article describes the vibrational impact arising due to the presence of gaps in bearings, as well as the affect on the reliability of the roll crushers. The design of the elastic pneumatic device for sampling gaps in bearings when working roll crushers is described and the reduction of vibration level by eliminating the gaps is proved experimentally.
About the Authors
A. G. Nikitin
Siberian State Industrial University (Novokuznetsk, Kemerovo region, Russia)
Russian Federation
Russian Federation
Dr. Eng., Professor
K. A. Chaynikov
Siberian State Industrial University (Novokuznetsk, Kemerovo region, Russia)
Russian Federation
Russian Federation
Postgraduate
References
1. Grebennik V.М., Tsapko V.K. Nadyozhnost’ metallurgicheskogo oborudovaniya (The reliability of metallurgical equipment). Мoscow: Metallurgiya, 1980. 343 p.
2. Nikitin А.G., Chaynikov K.А., Zinov’eva Е.V. Izv. vuz. Chernaya metallurgiya. 2011. № 10. Pp. 46, 47.
3. Orlov P.I. Osnovi konstruirovaniya. Т. 1. (Basics for the design. Vol. 1.). Мoscow: Mashinostroenie, 1988. 560 p.
4. Zhivov L.I., Kolesnik F.I., Mishchanin V.G., Bulat V.I. Kuznechno-shtampovochnoye proizvodstvo. 1974. № 5. Pp. 29 – 31.
5. Pat. 2453371 RF. Valkovaya drobilka / Nikitin A.G., Sakharov D.F., Chaynikov K.A., Prilukova N.Z. (Roller crusher). Otkritiya. Izobreteniya. 2012. № 17.
6. Nikitin А.G., Chaynikov K.А., Remorov V.Е., Zhi va-g o Ed.Ya. Izv. vuz. Chernaya metallurgiya. 2012. № 4. Pp. 68 – 70.
7. Nikitin А.G., Sakharov D.F. Izv. vuz. Chernaya metallurgiya. 2011. № 6. P. 53.
8.
Review
For citations:
Nikitin A.G., Chaynikov K.A. THE INFLUENCE OF GAPS IN BEARINGS ON THE RELIABILITY OF THE ROLL CRUSHER. Izvestiya. Ferrous Metallurgy. 2014;57(4):65-67. (In Russ.) https://doi.org/10.17073/0368-0797-2014-4-65-67
Views:
664
Email this article 