Preview

Izvestiya. Ferrous Metallurgy

Advanced search

D.K. Chernov’s role in creating and developing the doctrine of modern metallurgy and metal science. Part 2. Scientific and practical confirmation of D.K. Chernov’s ideas

https://doi.org/10.17073/0368-0797-2020-11-12-873-877

Abstract

The second part of the article is devoted to the practical realizing of D.K. Chernov’s scientific “predictions”. They were confirmed by him in the implementation of the concepts of points “a” and “b”, structure of the ingot and the possibility, taking into account the knowledge of these temperature boundaries, to build basic modes of deformation and subsequent heat treatment of steel ingots. These materials are supported by a modern interpretation of that provisions and additional materials of the authors.

About the Authors

L. I. Leont’ev
Institute of Metallurgy UB RAS; National University of Science and Technology “MISIS” (MISIS); Scientific Council on Metallurgy and Metal Science of Russian Academy of Sciences (Department of Chemistry and Material Sciences)
Russian Federation

Dr. Sci. (Eng.), Professor, Academician, Adviser of the Russian Academy of Sciences, Chief Researcher

Moscow



V. V. Tsukanov
Academician I.V. Gorynin Central Research Institute of Structural Materials “Prometey” National Research Center “Kurchatov Institute”
Russian Federation

Dr. Sci. (Eng.), Head of the Laboratory

St. Petersburg



D. L. Smirnova
Academician I.V. Gorynin Central Research Institute of Structural Materials “Prometey” National Research Center “Kurchatov Institute”
Russian Federation

Engineer

St. Petersburg



References

1. Tsukanov V.V. Sovremennye stali i tekhnologii v energomashinostroenii [Modern Steels and Technologies in Power Engineering]. St. Petersburg: ANO LA “Professional”, 2014, 464 p. (In Russ.).

2. Chernov D.K. Message to the Imperial Russian Technical Society on November 23, 1868, and the debate caused by it. Zapiski Imperatorskogo Russkogo Tekhnicheskogo Obshchestva. 1868, noyabr’- dekabr’, pp. 517–527. (In Russ.).

3. Chernov D.K. On preparation of steel armor-piercing shells. Zapiski Imperatorskogo Russkogo Tekhnicheskogo Obshchestva. 1885, no. 6, pp. 83–113. (In Russ.).

4. D.K. Chernov i nauka o metallakh [D.K. Chernov and Science of Metals]. Gudtsov N.T. ed. Moscow; Leningrad: Metallurgizdat, 1950, 564 p. (In Russ.).

5. Fedorov A.S. Outline of D.K. Chernov’s life and work. In: Izbrannye trudy po metallurgii i metallovedeniyu [Selected Works on Metallurgy and Metal Science]. Sadovskii V.D. ed. Moscow: Nauka, 1983, pp. 387–414. (In Russ.).

6. Golovin A.F. Significance of D.K. Chernov’s works in the development of Russian artillery technology. In: Trudy po istorii tekhniki [Proceedings on Technics History]. Issue 2. Moscow: Izd-vo AN SSSR, 1953, p. 60. (In Russ.).


Review

For citations:


Leont’ev L.I., Tsukanov V.V., Smirnova D.L. D.K. Chernov’s role in creating and developing the doctrine of modern metallurgy and metal science. Part 2. Scientific and practical confirmation of D.K. Chernov’s ideas. Izvestiya. Ferrous Metallurgy. 2020;63(11-12):873-877. (In Russ.) https://doi.org/10.17073/0368-0797-2020-11-12-873-877

Views: 553


Creative Commons License
This work is licensed under a Creative Commons Attribution 4.0 License.


ISSN 0368-0797 (Print)
ISSN 2410-2091 (Online)