Assessment of metals fabricability by pressure
https://doi.org/10.17073/0368-0797-2020-6-481-483
Abstract
A variant of quantitative assessment of metals fabricability by pressure is offered according to the standard tests on mechanical properties. The complex parameter is used, defined as geometrical mean of three parameters characterizing plasticity, hardening and energy intensity of alloys deformation. Relations of scientific and engineering characteristics of deformability assessment for the use of scientific researches results in factory practice are determined, being guided on the standard test methods. Examples of the use of received equations are resulted for a number of steels in processes of metal forming. Testing of the proposed method was carried out according to the known data. Estimation of the complex parameters was made in accordance with Harrington desirability scale. The offered technique can be used for an assessment of fabricability of new steels and alloys.
About the Authors
G. A. Orlov
Ural Federal University named after the first President of Russia B.N. Yeltsin
Russian Federation
Russian Federation
Dr. Sci. (Eng.), Professor of the Chair “Metal Forming”
Ekaterinburg
A. G. Orlov
Ural Federal University named after the first President of Russia B.N. Yeltsin
Russian Federation
Russian Federation
Postgraduate of the Chair “Metal Forming”
Ekaterinburg
References
1. Azgaldov G.G., Kostin A.V., Sadovov V.V. Kvalimetriya dlya vsekh: Ucheb. posobie [Qualimetry for everyone: Tutorial]. Moscow: ID InformZnanie, 2012, 165 p. (In Russ.).
2. Gun G.S. Upravlenie kachestvom vysokotochnykh profilei [Quality management of high-precision sections]. Moscow: Metallurgiya, 1984, 152 p. (In Russ.).
3. Rubin G.Sh., Chukin M.V., Gun G.S., Zakirov D.M., Gun I.G. Development of qualimetry theory for metalware products. Chernye Metally. 2012, no.7, pp. 15–21. (In Russ.).
4. Orlov G.A., Orlov A.G. Qualimetry rating of hot-rolled pipes. Solid State Phenomena. 2018, vol. 284, pp. 1349–1354.
5. Kratkii spravochnik metallista [Brief handbook of metallist]. Maslov A.N. ed. Moscow: Mashinostroenie, 1971, 767 p. (In Russ.).
6. Novik F.S., Arsov Ya.B. Optimizatsiya protsessov tekhnologii metallov metodami planirovaniya eksperimentov [Optimization of metals technology processes by experiment planning]. Moscow: Mashinostroenie, 1980, 304 p. (In Russ.).
Review
For citations:
Orlov G.A., Orlov A.G. Assessment of metals fabricability by pressure. Izvestiya. Ferrous Metallurgy. 2020;63(6):481-483. (In Russ.) https://doi.org/10.17073/0368-0797-2020-6-481-483
Views:
525
Email this article 