DEVELOPMENT OF ELEMENTS OF PERSONAL PROTECTION EQUIPMENT OF NEW GENERATION ON THE BASIS OF LAYERED METAL COMPOSITION
https://doi.org/10.17073/0368-0797-2015-1-44-48
Abstract
The article presents the results of investigation of the explosion welding of strips of spring steel with some sheet metals. The selection of metals and their properties are grounded. The results of the shooting of the compositions are presented. Recommendations for use of the compositions as armor elements and of selection of parameters of process for their production are given.
Keywords
About the Authors
V. V. Dragobetskii
Kremenchuk Mykhailo Ostohradskyi National University
Russian Federation
Russian Federation
Dr. Sci. (Eng.), Professor
A. A. Shapoval
Kremenchuk Mykhailo Ostohradskyi National University
Russian Federation
Cand. Sci. (Eng.)
Russian Federation
Cand. Sci. (Eng.)
V. G. Zagoryanskii
Kremenchuk Mykhailo Ostohradskyi National University
Russian Federation
Russian Federation
Cand. Sci. (Eng.), Assist. Professor
References
1. Grigoryan V.A., Kobylkin I.F., Marinin V.M., Chistyakov E.N. Materialy i zashchitnye struktury dlya lokal’nogo i individual’nogo bronirovaniya [Materials and protective structures for local and individual reservations]. Grigoryan V.A. ed. Moscow: Izd. RadioSoft, 2008. 406 p. (In Russ.).
2. Sil’nikov M.V., Khimichev V.A. Sredstva individual’noi bronezashchity [Body armor]. St. Petersburg: Fond «Universitet», 2000. 480 p. (In Russ.).
3. Grigoryan V.A., Beloborod’ko A.N., Dorokhov N.S. etc. Chastnye voprosy konechnoi ballistiki [Private questions of ultimate ballistics]. Grigoryan V.A. ed. Moscow: Izd-vo MGTU im. N.E. Baumana, 2006. 592 p. (In Russ.).
4. Tekhnicheskie sredstva obespecheniya zashchity i bezopasnosti. (Ekipirovka, sredstva individual’noi bronezashchity tela): Uchebnoe posobie [Means of protection and safety. (Equipment, personal body armor body): Textbook]. Tolyatti: Elektronnyi dokument,
5. 93 p. (In Russ.).
6. Arzamasov B.N., Sidorin I.I., Kosolapov G.F. etc. Materialovedenie [Materials Science]. Arzamasov B.N. ed. Moscow: Mashnostroenie, 1986. 384 p. (In Russ.).
7. Merkulova G.A. Metallovedenie i termicheskaya obrabotka tsvetnykh splavov [Metallurgy and heat treatment of non-ferrous alloys]. Krasnoyarsk: Sib. feder. un-t, 2008. 312 p. (In Russ.).
8. Il’in A.A., Kolachev B.A., Pol’kin I.S. Titanovye splavy. Sostav, struktura, svoistva. Spravochnik [Titanium alloys. The composition, structure and properties. Directory]. Moscow: VILS – MATI, 2009. 520 p. (In Russ.).
9. M cGraw-Hill Encyclopedia of Science and Technology, 10th Edition, Vol. 04 (CHE-COS). Licker M.D. (Publisher). McGraw-Hill, New York, 2007. 822 p.
10. Dragobetskii V.V., Zagoryanskii V.G., Zagirnyak V.E. Calculation of welding explosion layered copper-aluminum composition. Vіsnik Skhіdnoukraїns’kogo natsіonal’nogo unіversitetu іmenі Volodimira Dalya. no. 13 (184). Part. 1. Lugans’k: SNU іmenі Volodimira Dalya, 2012, pp. 60–69. (In Russ.).
11. Konon Yu.A. Iznosostoikii bimetall stal’ 45 + Kh6F1, poluchennyi svarkoi vzryvom s posleduyushchei goryachei prokatkoi (struktura i svoistva) [Wear resistant steel bimetal 45 + H6F1 obtained by explosion welding followed by hot rolling (structure and properties)]. In:
12. Konon Yu.A., Pervukhin E.B., Pinaev V.G. Teoreticheskie i tekhnologicheskie osnovy naplavki. Naplavka v mashinostroenii i remonte [Theoretical and technological fundamentals of surfacing. Surfacing in engineering and repair]. Kiev: IES im. E.O. Patona, 1981, pp. 59–63. (In Russ.).
13. Gorbatyuk S.M., Osadchii V.A., Tuktarov E.Z. Calculation of the geometric parameters of rotary rolling by using the automated design system Autodesk Inventor. Metallurgist. Vol. 55 Issue: 7–8, pp. 543–546.
Review
For citations:
Dragobetskii V.V., Shapoval A.A., Zagoryanskii V.G. DEVELOPMENT OF ELEMENTS OF PERSONAL PROTECTION EQUIPMENT OF NEW GENERATION ON THE BASIS OF LAYERED METAL COMPOSITION. Izvestiya. Ferrous Metallurgy. 2015;58(1):44-48. (In Russ.) https://doi.org/10.17073/0368-0797-2015-1-44-48
Views:
831
Email this article 