THERMOSPEED MACHINING OF ALUMINUM ALLOYS BY GASIFIED MODULUS CASTING
https://doi.org/10.17073/0368-0797-2014-4-38-40
Abstract
The article presents the results of the development and implementation of resource technology in a production environment for producing aluminum alloys for casting thin-walled corps on gasified models including thermo-speed melt processing. This technique enhances the mechanical properties of castings – tensile strength 14 – 22 %, elongation 32 – 75 %.
About the Authors
V. B. Deev
Siberian State Industrial University (Novokuznetsk, Kemerovo region, Russia)
Russian Federation
Russian Federation
Dr. Eng., Professor
I. F. Selyanin
Siberian State Industrial University (Novokuznetsk, Kemerovo region, Russia)
Russian Federation
Dr. Eng., Professor
Russian Federation
Dr. Eng., Professor
K. V. Ponomareva
Siberian State Industrial University (Novokuznetsk, Kemerovo region, Russia)
Russian Federation
Senior Lecturer
Russian Federation
Senior Lecturer
A. S. Yudin
«SPE Vector Engineering» (Novokuznetsk, Kemerovo region, Russia)
Russian Federation
Chief Technologist
Russian Federation
Chief Technologist
S. A. Tsetsorina
Siberian State Industrial University (Novokuznetsk, Kemerovo region, Russia)
Russian Federation
Russian Federation
Cand. Eng., Assist. Professor
References
1. Hosen Ri, R i Ed.H., Khimikhin S.N. etc. Liteyschik Rossii. 2010. № 8. Pp. 12 – 14.
2. Hosen Ri, R i Ed.H., Khimikhin S.N. etc. Liteyschik Rossii. 2010. № 8. Pp. 27, 28.
3. Deev V.B., Degtyar V.A., Kutsenko A.I. etc. Steel in Translation. 2007. Vol. 37. № 12. Pp. 991 – 994.
4. Nikitin V.I., Nikitin K.V. Nasledstvennost’ v litikh splavakh. (Heredity in cast alloys). Мoscow: Mashinostroenie-1, 2005. 510 p.
5. Deev V.B. Razvitie nauchnikh osnov teplovikh i elektromagnitnikh vozdeystviy na rasplavi i razrabotka resursosberegayushchikh tekhnologiy polucheniya visokokachestvennikh otlivok iz aluminievikh splavov (Development of scientific basis of thermal and electromagnetic effects on the development of resource melts and technologies to produce high quality castings of aluminum alloys). Avtoref. diss. dokt. tekhn. nauk. Komsomolsk-na-Amure, 2012. 35 p.
6. Deev V.B., Selyanin I.F., Mochalov S.P. etc. Liteynoe proizvodstvo. 2012. № 5. Pp. 16 – 18.
7.
Review
For citations:
Deev V.B., Selyanin I.F., Ponomareva K.V., Yudin A.S., Tsetsorina S.A. THERMOSPEED MACHINING OF ALUMINUM ALLOYS BY GASIFIED MODULUS CASTING. Izvestiya. Ferrous Metallurgy. 2014;57(4):38-40. (In Russ.) https://doi.org/10.17073/0368-0797-2014-4-38-40
Views:
672
Email this article 