NORMATIVE MODELING OF PERFORMANCE OF STEEL WIRE COPPERING UNIT
https://doi.org/10.17073/0368-0797-2018-2-164-167
Abstract
Explicit algorithmic normative model of technological line operation was developed, technically possible and normative values of work cycles and line productivity were calculated. Normative digital prototype of operation of coppering unit was designed, taking into account a number of lines, a number of wire “threads” used on each of them for calculation of multivariate technically possible and normative values of the system’s productivity.
Keywords
About the Authors
S. M. Kulakov
Siberian State Industrial University
Russian Federation
Russian Federation
Dr. Sci. (Eng.), Professor of the Chair «Automation and Information Systems».
Novokuznetsk
A. I. Musatova
Siberian State Industrial University
Russian Federation
Russian Federation
Senior Lecturer of the Chair «Management and Branch Economics».
Novokuznetsk
V. N. Kadykov
Siberian State Industrial University
Russian Federation
Russian Federation
Cand. Sci. (Eng.), Assist. Professor of the Chair «Metal Forming and Metal Science». OJSC «EVRAZ ZSMK».
Novokuznetsk
References
1. Singh S.K., Singh M.K. Evaluation of productivity, quality and flexibility of an advanced manufacturing system. Journal of the institution of engineers. 2012, January – March, pp. 93–101.
2. Diego Augusto de Jesus Pacheco, Isaac Pergher, Carlos Fernando Jung, Carla Scwenberg ten Caten. Strategies for increasing productivity in production systems. Independent journal of management & production (IJM&P). 2014, February – May, pp. 344–359.
3. Mohamed Boualem, Mouloud Cherfaoui, Amina Angelika Bouchentouf, Djamil Aïssani. Modeling, simulation and performance analysis of a flexible production system. European journal of pure and applied mathematics. 2015, no. 1, pp. 26–49.
4. Keith E. Stanovich, Richard F. West. Discrepancies between normative and descriptive models of decision making and the under-standing / acceptance principle. Cognitive Psychology. 1999, no. 38, pp. 349–385.
5. Högman U., Johannesson H. Technology development and normative process models. International design conference. 2010, May, pp. 17–20.
6. Vdovin K.N., Kol’ga M.A. Coppering of wire. Vestnik MGTU im. G.I. Nosova. 2010, no. 4, pp. 33–36. (In Russ.).
7. Musatova A.I., Kadykov V.N., Kulakov S.M. Evaluation of capacity of the production system based on the timing cycle approach. Nauchnoe obozrenie. 2014, no. 5, pp. 253–262. (In Russ.).
Review
For citations:
Kulakov S.M., Musatova A.I., Kadykov V.N. NORMATIVE MODELING OF PERFORMANCE OF STEEL WIRE COPPERING UNIT. Izvestiya. Ferrous Metallurgy. 2018;61(2):164-167. (In Russ.) https://doi.org/10.17073/0368-0797-2018-2-164-167
Views:
581
Email this article 