THE CALCULATION OF THE TEMPERATURE FIELD OF «SAND AND CLAY FORM – CAST» SYSTEM
https://doi.org/10.17073/0368-0797-2014-4-10-14
Abstract
The article considers the temperature field modeling issue in «sand and clay form – cast» system. The results obtained during the research allow modeling a thermal process of moulded piece production made both with pure metals and alloys, which solidify in a liquidus – solidus temperature range in dry and wet sand and clay forms with 2 – 14 % moisture.
About the Authors
A. S. Savinov
Magnitogorsk State Technical University (Magnitogorsk, Chelyabinsk region, Russia)
Russian Federation
Cand. Eng., Assist. Professor
Russian Federation
Cand. Eng., Assist. Professor
S. M. Andreev
Magnitogorsk State Technical University (Magnitogorsk, Chelyabinsk region, Russia)
Russian Federation
Cand. Eng., Assist. Professor
Russian Federation
Cand. Eng., Assist. Professor
A. S. Tuboltseva
Magnitogorsk State Technical University (Magnitogorsk, Chelyabinsk region, Russia)
Russian Federation
senior Lecturer
Russian Federation
senior Lecturer
E. V. Sinitskii
Magnitogorsk State Technical University (Magnitogorsk, Chelyabinsk region, Russia)
Russian Federation
Russian Federation
Cand. Eng., Assist. Professor
References
1. Kuznetsov G.V., Sheremet M.A. Raznostnye metody resheniya zadach teploprovodnosti (Difference methods for solving heat conduction). Tomsk: Izd-vo TPU, 2007. 172 p.
2. Verzhbitskiy V.M. Osnovy chislennih metodov (Fundamentals of numerical methods). Moscow: Vysshaja shkola, 2002. 840 p.
3. Savel‘ev I.V. Kurs obshchey fi ziki (General physics course). Moscow: Astrel’, 2001. 208 p.
4. Fiziko-himicheskie svoystva okislov: spravochnik (Physico-chemical properties of oxides: a guide). Pod red. G.V. Samsonova. Mos-cow: Metallurgiya, 1978. 320 p.
5. Savinov A.S., T ubol‘tseva A.S. Vestnik MGTU im. G.I. Nosova. 2010. № 2. Pp. 30 – 33.
6. Rybasenko V.D., Rybasenko I.D. Jelementarnye funkcii: formuly, tablitsi, grafi ki (Elementary functions: formulas, tables, graphs). Moscow: Nauka, 1987. 416 p.
7. Savinov A.S., T ubol‘tseva A.S., Varlamova D.V. Chernye metally. 2011. Spets. vypusk. Pp. 36 – 38.
8. Savinov A.S., T ubol‘tseva A.S., Radomskaya V.V. etc. V kn.: Sovremennaya metallurgiya nachala novogo tysyacheletiya: Sb. nauch. tr. Ch. I. (In the book.: Contemporary Metallurgy beginning of the new millennium: Sat scientifi c. tr. Part I.). Lipetsk: izd. LGTU, 2010. Pp. 32 – 36.
9. Lisin V.S., Selyaninov A.A. Modeli i algoritmy rascheta termomehanicheskih harakteristik sovmeshhennyh litejno-prokatnyh protsessov (Models and algorithms for calculating the thermo-mechanical characteristics combined casting-rolling process). Mos-cow: Vysshaya shkola, 1995. 144 p.
10. Savinov A.S. Al’manakh sovremennoy nauki i obrazovaniya. 2011. № 6. Pp. 81 – 84.
11. Veynik A.I. Termodinamika liteynoy formi (Thermodynamics mold). Moscow: Mashinostroenie, 1968. 335 p.
12.
Review
For citations:
Savinov A.S., Andreev S.M., Tuboltseva A.S., Sinitskii E.V. THE CALCULATION OF THE TEMPERATURE FIELD OF «SAND AND CLAY FORM – CAST» SYSTEM. Izvestiya. Ferrous Metallurgy. 2014;57(4):10-14. (In Russ.) https://doi.org/10.17073/0368-0797-2014-4-10-14
Views:
625
Email this article 