EXTENSION OF THE SCOPE OF STEEL COMPACTED STRANDS AND ROPES MADE OF THEM
https://doi.org/10.17073/0368-0797-2016-11-764-772
Abstract
Steel compacted strands and ropes made of them, having high constructive density, high wear resistance, increased tensile and fatigue strength, are widely used in various sectors of the economy: river and sea transport, engineering and construction pre-acceptance, oil and gas, metallurgy, coal industry, etc. The increase of physical and mechanical properties of the strands and the ropes made of them by high degree of fi lling with metal of cross-section makes it possible to use them as a ground wire and high-temperature cables for overhead electric power lines, which can be confi rmed by testing with integrated action on them of factors close to real conditions. Computer modeling can signifi cantly reduce the complexity of the experimental work on the industrial-rated equipment related to the selection of the optimal constructive-geometrical and technological parameters of production, as well as to carry out forecasting service properties of plastically pressed ropes and strands.
About the Authors
V. F. Danenko
Volgograd State Technical University
Russian Federation
Russian Federation
Cand. Sci. (Eng.), Assist. Professor, Deputy Head of the Chair “Materials Technology”,
Volgograd
L. M. Gurevich
Volgograd State Technical University
Russian Federation
Russian Federation
Dr. Sci. (Eng.), Assist. Professor, Head of the Chair “Material Science and Composite Materials”,
Volgograd
E. Yu. Kushkina
JSC “Severstal”, Redaelli SSM, Volgograd branch
Russian Federation
Russian Federation
Head of Technology Services,
Volgograd
E. B. Gladskikh
JSC “Severstal”, Redaelli SSM, Volgograd branch
Russian Federation
Russian Federation
Manager,
Volgograd
References
1. Malinovskii V.A. Stal’nye kanaty. Chast’ 1. Nekotorye voprosy tekhnologii, rascheta i proektirovaniya [Steel ropes. Part 1: Some questions of technology, calculation and design]. Odessa: AstroPrint, 2001, 188 p. (In Russ.).
2. Mol’nar V.G., Vladimirov Yu.V. Tekhnologicheskie osnovy proizvodstva stal’nykh kanatov [Technological basis of the production of steel ropes]. Moscow: Metallurgiya, 1975, 200 p. (In Russ.).
3. Sergeev S.T. Stal’nye kanaty [Steel ropes]. Kiev: Tekhnika, 1974, 328 p. (In Russ.).
4. Mamaev Yu.D., Danenko V.F. Proizvodstvo i ekspluatatsiya stal’nykh kanatov [Production and operation of steel ropes]. Volgograd: IUNL VolgGTU, 2010, 212 p. (In Russ.).
5. Skalatskii V.K. Ropes made of crimped strands. In: Sb. tr. Stal’nye kanaty [Coll. of papers: Steel ropes]. Issue1. Kiev: Tekhnika, 1964, pp. 152–158. (In Russ.).
6. Skalatskii V.K., Shkarupin B.E. The study of mechanical properties of crimped strands and ropes made of them. In: Sb. tr. Stal’nye kanaty [Coll. of papers: Steel ropes]. Issue 4. Kiev: Tekhnika, 1967, pp. 138–145. (In Russ.).
7. Glushko M.F., Skalatskii V.K., Shilin I.A. Evolution and prospects of the production technology development of steel ropes. In: Sb. tr. Stal’nye kanaty [Coll. of papers: Steel ropes]. Issue 5. Kiev: Tekhnika, 1968, pp. 94–101. (In Russ.).
8. Skalatskii V.K. Assessment of the deformation degree at the plastic compression of round strands. In: Sb. tr. Stal’nye kanaty [Coll. of papers: Steel ropes]. Issue 6. Kiev: Tekhnika, 1969, pp. 170–173. (In Russ.).
9. Skalatskii V.K., Solomkin L.D. Methods for determining the degree of plastic compression of strands. In: Sb. tr. Povyshenie eff ektivnosti i kachestva metiznykh izdelii [Coll. of papers: Improving the efficiency and quality of metal wares]. Moscow: Metallurgiya, 1981, pp. 50–54. (In Russ.).
10. Kharitonov V.A., Lapteva T.A. Choice of deformation modes at compression of the multilayer ropes at three-roller die. Proizvodstvo prokata. 2013, no. 8, pp. 18–25. (In Russ.).
11. Glushko M.F., Malinovskii V.A., Kobyakov Yu.V., Skalatskii V.K., Emel’yanov V.G. Sposob izgotovleniya provolochnogo kanata [A method of wire rope manufacturing]. Certifi cate of authorship USSR no. 867976. Byulleten’ izobretenii. 1981, no. 36. (In Russ.).
12. Malinovskii V.A., Kobyakov Yu.V. Longitudinal stiff ness of the crimped strands. In: Sb. tr. Povyshenie eff ektivnosti i kachestva metiznykh izdelii [Coll. of papers: Improving the effi ciency and quality of metal wares]. Moscow: Metallurgiya, 1981, pp. 41–43. (In Russ.).
13. Skalatskii V.K., Emel’yanov V.G. Increase of service life of ropes of plastic crimped strands. In: Sb. tr. Stal’nye kanaty [Coll. of papers: Steel ropes]. Issue 9. Kiev: Tekhnika, 1972, pp. 171–179. (In Russ.).
14. Skalatskii V.K., Kulik N.T. Nature of the distribution of stresses in round plastic crimped strands under axial tension. In: Sb. tr. Stal’nye kanaty [Coll. of papers: Steel ropes]. Issue 6. Kiev: Tekhnika, 1969, pp. 154–157. (In Russ.).
15. Glushko M.F., Skalatskii V.K. Questions of calculation, mechanical testing and comparative assessment of the round crimped strands. In: Sb. tr. Stal’nye kanaty [Coll. of papers: Steel ropes]. Issue 2. Kiev: Tekhnika, 1965, pp. 172–180. (In Russ.).
16. Malinovskii V.A., Solomkin L.D. Waern and some other ropes of PK type. In: Sb. tr. Stal’nye kanaty [Coll. of papers: Steel ropes]. Issue 3. Odessa: AstroPrint, 2003, pp. 243–250. (In Russ.).
17. Lapteva T.A. Povyshenie rabotosposobnosti podvizhnykh kanatov na osnove primeneniya kalibruyushchego obzhatiya pryadei: Avtoref. … dis. kand. tekhn. nauk [Increasing effi ciency of mobile rope through the use of caliber compression of strands: Extended Abstract of Cand. Sci. Diss.]. Magnitogorsk: MGTU, 2014, 18 p. (In Russ.).
18. Stravnichuk P.A. Razrabotka energosberegayushchei tekhnologii proizvodstva plasticheski deformirovannykh armaturnykh kanatov prokatkoi: Avtoref. … dis. kand. tekhn. nauk [Development of the energy-saving technology of production of plastically deformed reinforcing ropes by rolling: Extended Abstract of Cand. Sci. Diss.]. Magnitogorsk: MGTU. 2003, 16 p. (In Russ.).
19. Kharitonov V.A., Lunev V.E., Polyakova M.A. etc. Caliber compression of ropes of double lay in a roller die. In: Obrabotka sploshnykh i sloistykh materialov: mezhvuz. sb. nauch. tr. [Treatment of solid and laminated materials: Coll. of scientific papers]. Issue 1 (42). Magnitogorsk: MGTU, 2015, pp. 22–28. (In Russ.).
20. Vagelyuk V.I., Skalatskii V.K. Operation experience of ropes of round crimped strands. In: Sb. tr. Stal’nye kanaty [Coll. of papers: Steel ropes]. Issue 6. Kiev: Tekhnika, 1969, pp. 210–212. (In Russ.).
21. Kharitonov V.A., Lapteva T.A. Infl uence of small reduction ratio on the formation of stress state of the rope. In: Obrabotka sploshnykh i sloistykh materialov: mezhvuz. sb. nauch. tr. [Treatment of solid and laminated materials: Coll. of scientifi c papers]. Issue1. Magnitogorsk: MGTU, 2010, pp. 172–174. (In Russ.).
22. Skalatskii V.K., Emel’yanov V.G. Operability of the ropes of plastically treated strands depending on the material and formation parameters of strands. In: Sb. tr. Stal’nye kanaty [Coll. of papers: Steel ropes]. Issue 10. Kiev: Tekhnika, 1973, pp. 110–120. (In Russ.).
23. Trusov V.A., Kaputkina L.M. etc. Research and development of the production technology of a new product – steel ropes with plastically crimped strands in OJSC “Severstal-metiz”. Proizvodstvo prokata. 2011, no. 10, pp. 33–37. (In Russ.).
24. Trusov V.A., Kaputkina L.M. etc. Infl uence of plastic deformation during drawing of wire strands in the roller cage on the mechanical properties of steel ropes. Proizvodstvo prokata. 2012, no. 1, pp. 41–44. (In Russ.).
25. Petrovich V.V., Fokin V.A., Vlasov A.K., Frolov V.I., Zvyagintsev A.V., Zhulev A.N. Grozozashchitnyi tros [Ground wire]. Patent RF no. 2361304. Byulleten’ izobretenii. 2009. no. 19. (In Russ.).
26. Fokin V.A., Vlasov A.K., Petrovich V.V., Zvyagintsev A.V., Frolov V.I. Stalealyuminevyi provod dlya vozdushnoi linii elektroperedachi [Steel-aluminum wire for overhead power transmission line]. Patent RF no. 132241. Publ.: 10.09.2013. Byul. no. 25. (In Russ.).
27. Fokin V.A., Vlasov A.K., Frolov V.I. Sposob izgotovlenya stal’nogo trosa [A production method of steel cable]. Patent RF no. 2490742. Byulleten’ izobretenii. 2013, no. 23. (In Russ.).
28. Vlasov A.K., Fokin V.A., Petrovich V.V., Frolov V.I., Danenko V.F. Improving the performance of lightning-protection cables for overhead power lines. Steel in Translation. 2011, vol. 41, no. 7, pp. 607–610.
29. Rukovodstvo po primeneniyu stal’nykh kanatov i ankernykh ustroistv v konstruktsiyakh zdanii i sooruzhenii. NII stroit. konstruktsii Gosstroya SSSR [Guidance on the application of steel ropes and anchoring devices in buildings and structures. SRI building. designs USSR State Committee]. Moscow: Stroiizdat, 1978. 94 p. (In Russ.).
30. Vlasov A.K., Fokin V.A., Danenko V.F. etc. The study of resistance of ground wire to the lightning and mechanical stress. Stal’. 2013, no. 9, pp. 66–70. (In Russ.).
31. Boksimer M.E. Advantages of Optical Cable OPGW. Elektrotekhnicheskii rynok. 2007, no. 7–8, pp. 11–13. (In Russ.).
32. Dubitskii S.D., Korovkin N.V., Babkov E. Ground wire with optical fi ber. Thermal resistance to direct lightning strike. Novosti elektrotekhniki. 2011, no. 4. Available at URL: http://www.news.elteh.ru/arh/2011/70/07.php. (In Russ.).
33. Vlasov A.K., Fokin V.A., Petrovich V.V., Frolov V.I. Grozozashchitnyi tros s opticheskim kabelem svyazi [Ground wire with optical cable connection]. Patent RF no. 2441293. Byulleten’ izobretenii. 2012, no. 3. (In Russ.).
34. Kharitonov V.A., Lapteva T.A. Calculation of the strain distribution over the section of the strand in the circumferential compression. Vestnik MGTU im. G.I. Nosova. 2012, no. 4, pp. 47–51. (In Russ.).
35. Gurevich L.M., Danenko V.F., Pronichev D.V., Trunov M.D. Simulation of temperature and current density in the ground wire in the passage of short circuit. Energiya edinoi seti. 2014, no. 5, pp. 16–23. (In Russ.).
36. Gurevich L.M., Danenko V.F., Pronichev D.V. etc. Simulation of the operational properties of ground wire with optical connection cable. Energiya edinoi seti. 2014, no. 1, pp. 38–45. (In Russ.).
37. Gurevich L.M., Danenko V.F., Pronichev D.V. etc. Simulation of the operational properties of ground wire with optical connection cable under diff erent climatic conditions. Vozdushnye linii. 2015, no. 1, pp. 25–33. (In Russ.).
38. Kolosov S.V., Fokin V.A. New generation of overhead wires: plastically deformed wire. Elektroenergiya. Peredacha i raspredelenie. 2014, no. 1, pp. 84–86. (In Russ.).
39. Fokin V.A., Vlasov A.K., Petrovich V.V., Zvyagintsev A.V., Frolov V.I. Sposob izgotovleniya vysokotemperaturnogo provoda dlya vozdushnoi linii elektroperedachi i provod, poluchennyi dannym sposobom [The method of manufacturing the high temperature wires for aerial power lines and wire obtained in this manner]. Patent RF no. 2447525. Byulleten’ izobretenii. 2012, no. 10. (In Russ.).
40. Gurevich L.M., Danenko V.F., Pronichev D.V. etc. Simulation of electromagnetic losses in the steel-aluminum wires of diff erent constructions. Elektroenergiya. Peredacha i raspredelenie. 2014, no. 5 (26), pp. 68–71. (In Russ.).
41. Issledovanie aerodinamicheskoi ustoichivosti i gololedoobrazovaniya provodov ASVP I ASVT [Research of aerodynamic stability and ice formation of ASVP and ASVT wires]. Available at URL: http://www.energoservise.com/files/Ussledovanie_aerodina._ystoichivosti.pdf (In Russ.).
42. Nazim Ya.V., Leshchenko A.A. Laboratory studies of ice formation on the steel-aluminum wires of overhead power lines in the DonNASA climatic chamber. Zbіrnik naukovikh prats’ (galuzeve mashinobuduvannya, budіvnitstvo). Issue 2 (30). 2011. PoltNTU, pp. 122–128. (In Russ.).
43. Gorokhov E.V., Nazim Ya.V., Vasylev V.N. etc. Tests on ice resistance of the compact and sector wires of overhead power lines in the climatic chamber. Metallicheskie konstruktsii. vol. 18, no. 1. 2012, pp. 73–84. (In Russ.).
44. Rules for electrical installations. Part 2.5 “The overhead power transmission lines with voltages above 1kV to 750 kV”. Kiev: OEP “GRІFRE”, 2006, 125 p.
45. Pravila ustroistva elektroustanovok [Rules for electrical installations]. 7th Edition. Moscow: Izd-vo NTs ENAS. 2003, 176 p. (In Russ.).
46. Vlasov A.K. Benefi ts of using crimped steel-aluminum, highstrength plastic (ASVP), high-temperature (ASVT) wire, ground (TU 062-2008) and OPGW (TU 113-2013) wires in reconstruction and new construction of the overhead power lines. Vozdushnye linii. 2014, no. 4, pp. 23–29. (In Russ.).
Review
For citations:
Danenko V.F., Gurevich L.M., Kushkina E.Yu., Gladskikh E.B. EXTENSION OF THE SCOPE OF STEEL COMPACTED STRANDS AND ROPES MADE OF THEM. Izvestiya. Ferrous Metallurgy. 2016;59(11):764-772. (In Russ.) https://doi.org/10.17073/0368-0797-2016-11-764-772
Views:
711
Email this article 