INVESTIGATION OF LINING PARAMETERS IMPACT ONTO METAL AIR-COOLING PROCESS IN CHAMBER FURNACE
https://doi.org/10.17073/0368-0797-2016-11-759-763
Abstract
The appropriate mathematical model was created for the investigation of lining parameters impact onto metal air-cooling process in chamber furnace. Numerical computing for various lining composition was conducted: fully dense refractory material, made from chamotte brick; refractory ceramic fi bers on the wall and arch with fully dense refractory of hearth; conceptual lining of entire chamber furnace with refractory ceramic fi bers. Processing of the results allowed to illustrate the impact of the lining type on the length of aircooling process, thereby showing possible reserves for accelerating of this process step.
About the Authors
P. A. Gnitiev
Donetsk National Technical University
Ukraine
Ukraine
Postgraduate,
Donetsk
A. B. Biryukov
Donetsk National Technical University
Ukraine
Ukraine
Dr. Sci. (Eng.), Professor, Head of the Chair “Technical Thermophysics”,
Donetsk
References
1. Kurbatov Yu.L., Vasilenko Yu.E. Metallurgicheskie pechi: uchebnoe posobie [Metallurgical furnaces: Manual]. Donetsk: DonNTU, 2013, 388 p. (In Russ.).
2. Krivandin V.A. Egorov A.V. Teplovaya rabota i konstruktsiya pechei chernoi metallurgii [Thermal operation and construction of furnaces of ferrous metallurgy]. Moscow: Metallurgiya, 1989, 463 p. (In Russ.).
3. Svinolobov N.P. Brovkin V.L. Pechi chernoi metallurgii: Uchebnoe posobie dlya vuzov [Furnaces of ferrous metallurgy: Manual]. Dnepropetrovsk: Porogi, 2004, 154 p. (In Russ.).
4. Gubinskii V.I. Metallurgicheskie pechi: Ucheb. posobie [Metallurgical furnaces: Manual]. Dnepropetrovsk: NMetAU, 2006, 85 p. (In Russ.).
5. Osnos S.P. Gololobov O.I. Experience of application of modern fibrous refractory materials and heating systems. Stroitel’nye materialy i izdeliya. 2001, no. 4, pp. 130–136. (In Russ.).
6. Biryukov A.B. Saf’yants S.M., Gnitiev P.A. Analysis of the current state of air cooling technology of metal in furnaces. Chernaya metallurgiya. Byul. in-ta “Chermetinformatsiya”. 2014, no. 11, pp. 42–46. (In Russ.).
7. Rumyantsev V.D. Teoriya teplo- i massoobmena: Uchebnoe posobie [Theory of heat and mass transfer: Manual]. Dnepropetrovsk: Porogi, 2006, 532 p. (In Russ.).
8. Biryukov A.B. Teplotekhnika nepreryvnoi razlivki stali i teplovoi obrabotki zagotovok [Heat engineering of continuous steel casting and billets thermal treatment]. Saarbrücken: LAMBERT Academic Publishing, 2015, 444 p. (In Russ.).
9. Kazantsev E.I. Promyshlennye pechi. Spravochnoe rukovodstvo dlya raschetov i proektirovaniya [Industrial furnaces. Reference manual for the calculation and design]. Moscow: Metallurgiya, 1975, 368 p. (In Russ.).
10. Nedopekin F.V. Ginkul S.I. Novikova E.V. Teoreticheskie i prikladnye aspekty teploperenosa [Theoretical and applied aspects of heat transfer]. Donetsk: DonNU, 2013, 321 p. (In Russ.).
11. Shorin S. Teploperedacha [Heat transfer]. Moscow: GIZLSA, 1952, 340 p. (In Russ.).
12. Dymnich A.Kh. Troyanskii A.A. Voprosy teplomassoobmena v staleplavil’nykh protsessakh: uchebnik-monografi ya [Questions of heat and mass transfer in steelmaking processes]. Donetsk: DonNTU, 2009, 581 p. (In Russ.).
13. Cebeci Tuncer, Bradshaw Peter. Physical and Computational Aspects of Convective Heat Transfer. New York: Springer-Verlag Inc, 1984. (Russ.ed.: Cebeci T., Bradshaw P. Konvektivnyi teploobmen. Fizicheskie osnovy i vychislitel’nye metody. Moscow: Mir, 1987, 592 p.).
14. Gnitiev P.A. Convective heat transfer in furnaces under pulsed and non-pulsed modes of coolant supply. Promyshlennaya teplotekhnika. 2015, no. 2, pp. 39–47. (In Russ.).
15. Nevskii A.S. Luchistyi teploobmen v pechakh i topkakh [Radiative heat transfer in furnaces and fire chambers]. Moscow: Metallurgiya, 1971, 440 p. (In Russ.).
Review
For citations:
Gnitiev P.A., Biryukov A.B. INVESTIGATION OF LINING PARAMETERS IMPACT ONTO METAL AIR-COOLING PROCESS IN CHAMBER FURNACE. Izvestiya. Ferrous Metallurgy. 2016;59(11):759-763. (In Russ.) https://doi.org/10.17073/0368-0797-2016-11-759-763
Views:
608
Email this article 