ON THE THEORY OF COUNTERFLOW HEATING OF THERMALLY MASSIVE BODIES BY RADIATION AND CONVECTION SIMULTANEOUSLY
https://doi.org/10.17073/0368-0797-2016-7-497-503
Abstract
The task of counterfl ow heating of thermally massive bodies was defi ned and solved. The mathematical model considers heating bodies of classical geometry (panel, cylinder and sphere) by radiation and convection simultaneously, as well as linearly dependent thermal characteristics from temperature. Initial equations of heat exchange were mostly realized through technological processes of metal heating in continuous furnaces of rolling manufacture. The solution of double nonlinear problem was realized by the equivalent sources method (ESM) which is an effective mathematical apparatus to solve different tasks, including applied problems of metallurgical thermal engineering. Testing of approximate analytical solution in accordance with ESM algorithm was fulfi lled for the following cases: for Kavaderov-Kalugin method (case of plate pure radiant heating) and numerical solution in accordance with the algorithm of apparent finite-difference approximation of the initial system of diff erential equations. Comparison of computational results of all methods showed a satisfactory fi t and the availability of solution in an explicit form with an opportunity to simplify it proves the advisability of its application in heating engineering calculations of metallurgical furnaces.
About the Author
V. I. Timoshpol’skii
CJSC PII SIT “NEFTEGAZSTROIIZOLYATSIYA”, Kiev, Ukraine
Dr. Sci. (Eng.), Professor, Director of Science and New Equipment
References
1. Ivantsov G.P., Lyubov B.Ya. Counterfl ow heating of lump mat erials. DAN SSSR, 1952, vol. 85, no. 5, pp. 993–995. (In Russ.).
2. Gol’dfarb, E.M. Teplotekhnika metallurgicheskikh protsessov [Ther mal engineering of metallurgical processes]. Moscow: Metallurgiya, 1967, 439 p. (In Russ.).
3. Kavaderov A.V., Kalugin V.N. Regularities of heating a massive body in counterfl ow radiation. In: Nagrev metalla i rabota nagrevatel’nykh pechei: Sb. nauch. tr. VNIIMT [Heating of metal and work of heating furnaces: Coll.of VNIIMT reports]. Sverdlovsk: Metallurgizdat, 1960, no. 6, pp. 59–70. (In Russ.).
4. Kitaev, B.I., Yaroshenko Yu.G., Suchkov V.D. Teploobmen v shakhtnykh pechakh [Heat exchange in shaft furnaces]. Moscow: Metallurgizdat, 1957, 280 p. (In Russ.).
5. Glinkov M.A., Glinkov G.M. Obshchaya teoriya pechei [General theory of furnaces]. Moscow: Metallurgiya, 1978, 264 p. (In Russ.).
6. Postol’nik Yu.S. To the calculations of temperatures and time of heating massive bodies in counterfl ow heat exchange. Izvestiya VUZov. Chernaya metallurgiya = Izvestiya. Ferrous Metallurgy. 1990, no. 9, pp. 84–86. (In Russ.).
7. Postol’nik Yu.S., Timoshpol’skii V.I., Andrianov D.N., Ratnikov P.E. Engineering methods of calculation of diff erent regimes of heating of thermally massive objects in metallurgical heat technologies under countercurrent conditions. 1. State of the problem. Convective heating. Journal of Engineering Physics and Thermophysics. 2004, vol. 77, no. 4, pp. 679–687.
8. Postol’nik Yu.S., Timoshpol’skii V.I., Andrianov D.N., Trusova I.A. Engineering methods of calculation of diff erent regimes of heating of thermally massive objects in metallurgical heat technologies under countercurrent conditions. 2. Radiative and radiative-convective countercurrent heating. Journal of Engineering Physics and Thermophysics. 2004, vol. 77, no. 6, pp. 1069–1079.
9. Postol’nik Yu.S. Radiant heating of simple shapes. Journal of Engineering Physics and Thermophysics. 1965, vol. 8, no. 1, pp. 47–53.
10. Postol’nik Yu.S. Temperature calculation of a plate and a cylinder heated by radiation and convection simultaneously. Inzhenerno-Fizicheskii Zhurnal. 1969, no. 6, vol. 16, pp. 1082–1086. (In Russ.).
11. Postol’nik Yu.S. The equivalent sources method in the problems of non-standard conductivity. In: Teploobmen i gidrodinamika [Heat exchange and hydrodynamics]. Kiev: Naukova dumka, 1977, pp. 161–167. (In Russ.).
12. Postol’nik Yu.S. Symmetrical convection heating of a prism with a time-alternate heat exchange coeffi cient. Izvestiya VUZov. Energetika. 1972, no. 3, pp. 145–147. (In Russ.).
13. Timoshpol’skii V.I. Engineering calculation method of massive bodi es in radiant heating exchange. Izvestiya VUZov. Chernaya metal lurgiya = Izvestiya. Ferrous Metallurgy. 1986, no. 7, pp. 126–129. (In Russ.).
14. Postol’nik Yu.S., Garanchuk V.A., Guba V.M. The study of heat conductivity with functionally dependent parameters. Izvestiya VUZov. Chernaya metallurgiya = Izvestiya. Ferrous Metallurgy. 1973, no. 6, pp. 140–145. (In Russ.).
15. Postol’nik Yu.S., Timoshpol’skii V.I. Radiation and convection heating of an unlimited cylinder with functionally dependent thermal characteristics. Izvestiya VUZov. Energetika. 1980, no. 3, pp. 121–124. (In Russ.).
16. Timoshpol’skii V.I., Trusova I.A., Nesenchuk A.P., Brodskii S.S., Dubina O.V., Pavlyuchenkov I.A. Promyshlennye teplotekhnologii: Modelirovanie nelineinykh protsessov: Ucheb. [Industrial technologies: modeling of nonlinear processes]. Timoshpol’skii V.I., Nesenchuk A.P. eds. Minsk: Vysh. shkola, 2000, 319 p. (In Russ.).
17. Timoshpol’skii V.I., Postol’nik Yu.S., Andrianov D.N. Teoreticheskie osnovy teplofi ziki i termomekhaniki v metallurgii [Theoretical foundations of thermal physics and thermal mechanics in metallurgy]. Minsk: Bel. navuka, 2005, 560 p. (In Russ.).
18. Rostkovskii S.E. Heat transfer by counterfl ow radiation (on the theory of continuous heating furnaces). In: Teplotekhnika slitka i pechei: Sb. tr. TsNIIChM [Thermal engineering of ingot and furnaces: Coll. of TsNIIChM reports]. Moscow: Metallurgizdat, 1953, Issue 2 (5), pp. 17–25. (In Russ.).
Review
For citations:
Timoshpol’skii V.I. ON THE THEORY OF COUNTERFLOW HEATING OF THERMALLY MASSIVE BODIES BY RADIATION AND CONVECTION SIMULTANEOUSLY. Izvestiya. Ferrous Metallurgy. 2016;59(7):497-503. (In Russ.) https://doi.org/10.17073/0368-0797-2016-7-497-503
Views:
690
Email this article 