DEVELOPMENT OF THE ALGORITHMIC STRUCTURE ARM OF SITUATIONAL CONTROL SYSTEM OF PIPE PRODUCTION
https://doi.org/10.17073/0368-0797-2016-5-347-353
Abstract
Traditional approaches to solving the problems of operational process of automation (situational) production management of cold pipes are based on the construction of the classic behavioral research operations using quantitative information, which leads to a significant loss of semantic content of the information structure of semistructured problems of adequate procedures for the selection of alternative solutions. The article describes the alternative approach based on the synthesis of natural language semiotic models using semantic information in the development of tools for ARM type “Advisor Wizard”.
About the Author
S. Ya. Fomin
National University of Science and Technology “MISIS” (MISIS), Moscow, Russia
Russian Federation
Russian Federation
Dr. Sci. (Eng.), Professor of the Chair of Automation Control Systems (ACS)
References
1. Lobov F.M. Operativnoe upravlenie proizvodstvom [Production operations management]. Rostov-on-Don: Feniks, 2003, 160 p. (In Russ.).
2. Zagidullin R.R. Operativno-kalendarnoe planirovanie v gibkikh proizvodstvennykh sistemakh [Operatively scheduling in flexible manufacturing systems]. Zoriktuev V.Ts. ed. Moscow: Izd-vo MAI, 2004, 208 p. (In Russ.).
3. Mauergauz Yu.E. Avtomatizatsiya operativnogo planirovaniya v mashinostroitel’nom proizvodstve [Automation of operational planning in the engineering industry]. Moscow: Ekonomika, 2007, 286 p. (In Russ.).
4. Evmenov V.P. Intellektual’nye sistemy upravleniya. Uch. posobie [Intelligent control systems. Manual]. Moscow: Izd-vo Librokom, 2009, 290 p. (In Russ.).
5. Brovkova M.V. Sistemy iskusstvennogo intellekta v mashinostroenii Uch. posobie [Artificial intelligence systems in mechanical engineering. Manual]. Saratov: SGTU, 2004, 120 p. (In Russ.).
6. Pospelov D.A. Situatsionnoe upravlenie. Teoriya i praktika [Contingency management. Theory and practice]. Moscow: Nauka, 1986, 284 p. (In Russ.).
7. Mel’nikov V.P., Vasil’eva T.Yu. Metodologiya adaptivno-situatsionnogo upravleniya tekhnologicheskoi podgotovki proizvodstva REA s primeneniem ekspertnykh modelei [The methodology of adaptive situational management of technological preparation of manufacturing electronics using expert models]. Izd-vo Buki Vedi, 2014, 262 p. (In Russ.).
8. Kolesnikov A.A. Situatsionnoe upravlenie nestatsionarnymi proizvodstvennymi protsessami [Contingency management of unsteady production processes]. Hamburg: LAP, 2012, 220 p. (In Russ.).
9. Fomin S.Ya., Belyakova Yu.S. Development of interactive flexible automated operating control system for management of a compound multioperational manufacturing. Report 2. Izvestiya VUZov. Chernaya metallurgiya = Izvestiya. Ferrous Metallurgy. 2013, no. 5, pp. 58–62. (In Russ.).
10. Fomin S.Ya., Silakova Yu.V. Interactive operational planning procedure of the technical operations in the compound multioperational manufacturing. Izvestiya VUZov. Chernaya metallurgiya = Izvestiya. Ferrous Metallurgy. 2014, no. 5, pp. 51–55. (In Russ.).
11. Fomin S.Ya. Structuring situations in the operational management of production complex. Izvestiya VUZov. Chernaya metallurgiya = Izvestiya. Ferrous Metallurgy. 2002, no. 9, pp. 52–53. (In Russ.).
Review
For citations:
Fomin S.Ya. DEVELOPMENT OF THE ALGORITHMIC STRUCTURE ARM OF SITUATIONAL CONTROL SYSTEM OF PIPE PRODUCTION. Izvestiya. Ferrous Metallurgy. 2016;59(5):347-353. (In Russ.) https://doi.org/10.17073/0368-0797-2016-5-347-353
Views:
560
Email this article 