ON THE APPROACH TO THE DEVELOPMENT OF INFORMATION CONTROL SYSTEM OF TECHNOLOGICAL METALLURGICAL OBJECTS
https://doi.org/10.17073/0368-0797-2016-4-271-277
Abstract
The paper presents the information about the use of modern information systems in control processes. It considers the problemsof information, algorithmic, technical, software and mathematical software to create such systems. The authors have analyzed the issues of improving the reliability of information control systems to be used as expert systems when operating in the forecast. The expert system (simulator) for the technological process in metallurgy, scientific-methodical and program-algorithmic maintenance of the system based on technologies imitation modeling has been discussed. The system was designed for the training of personnel of potentially dangerous technological object, as well as for teaching the students of technical specialties of metallurgical profile. This system allows to explore an object of study in various modes of operation and to receive practical experience for optimal and trouble-free management.
About the Authors
O. V. Kiryakova
Siberian Federal University, Krasnoyarsk, Russia
Russian Federation
Russian Federation
Cand. Sci. (Eng.), Assist. Professor of the Chair of Information Systems and Technologies in Metallurgy
L. A. Lapina
Siberian Federal University, Krasnoyarsk, Russia
Russian Federation
Russian Federation
Assist. Professor of the Chair of Information Systems and Technologies in Metallurgy
S. V. Kapustina
Siberian Federal University, Krasnoyarsk, Russia
Russian Federation
Russian Federation
Cand. Sci. (Eng.), Asist. Professor, Head of the Chair of Information Systems and Technologies in Metallurgy
References
1. Tsymbal V.P. Matematicheskoe modelirovanie slozhnykh sistem v metallurgii: Uchebnik dlya vuzov [Mathematical modeling of complex systems in metallurgy: Textbook for universities]. Kemerovo, Moscow: Kuzbassvuzizdat–ASTSh, 2006, 431 p. (In Russ.).
2. Gorenskii B.M., Kiryakova O.V., Chentsov S.V. Informatsionnye tekhnologii v tsvetnoi metallurgii: uchebnoe posobie [Information technologies in non-ferrous metallurgy: Manual]. Krasnoyarsk: izd. SFU, 2012, 187 p. (In Russ.).
3. Sovetov B.Ya., Yakovlev S.A. Modelirovanie sistem: Uchebnik dlya vuzov [Modeling of systems: Textbook for universities]. Moscow: Vysshaya shkola, 2007, 343 p. (In Russ.).
4. Bykova P.O. Modelirovanie ob”ektov i protsessov v metallurgii: Uchebnoe posobie [Modeling of objects and processes in metallurgy: Manual]. Perm’: Izd-vo Permskogo Gosudarstvennogo tekhnicheskogo universiteta, 2010, 132 p. (In Russ.).
5. Ryzhonkov D.I. Raschety metallurgicheskikh protsessov na EVM [Computer calculations of metallurgical processes]. Moscow: Metallurgiya, 1987, 231 p. (In Russ.).
6. Maslenitskii I.M. Metallurgiya blagorodnykh metallov: Uchebnik dlya vuzov [Metallurgy of noble metals: Textbook for universities]. Moscow: Metallurgiya, 1987, 768р. (In Russ.).
7. Blagoveshchenckaya М.М., Zlobin L.А. Informatsionnye tekhnologii system upravleniya tekhnologicheskimi protsessami: Uchebnik dlya vuzov [Information technologies of technological process control systems: Textbook for universities]. Мoscow: Vysshaya shkola, 2005, 768 p. (In Russ.).
8. Grinberg А.S., Gorbachev N.N., Bondarenko А.S. Informatsionnye tekhnologii upravleniya: Uchebnik dlya vuzov [Information technology control: Textbook for higher educational institutions]. Мoscow: YUNITI-DANA, 2004, 479 p. (In Russ.).
9. Vasil’ev V.I., Коnovalenko V.V., Gorelov Yu.I. Imitatsionnoe upravlenie neopredelennymi ob’’ektami [Simulation control of undefined objects]. Кiev: Naukova dumka, 1989, 216 p. (In Russ.).
10. Utkin N.I. Tsvetnaya metallurgiya (tekhnologiya otrasli): Uchebnik dlya vuzov [Non-ferrous metallurgy (branch technology): Textbook for universities]. Мoscow: Metallurgiya, 1990, 439 p. (In Russ.).
11. Belai G.E. Organizatsiya metallurgicheskogo eksperimenta: Uchebnoe posobie dlya vuzov [Organization of metallurgical experiment: Manual for universities]. Мoscow: Metallurgiya, 1993, 256 p. (In Russ.).
12. Spirin N.A., Lavrov V.V., Parshakov S.I., Denisenko S.G. Optimizatsiya i identifikatsiya tekhnologicheskikh protsessov v metallurgii: Uchebnoe posobie [Optimization and identification of technological processes in metallurgy: Manual]. Ekaterinburg: izd. UGTU-UPI, 2006, 307 p. (In Russ.).
13. Aleksandrova N.A., Kurkina V.V., Rudakova I.V., Rusinov L.A. Verification of expert information at modeling of operational control systems and diagnostics of technological processes. Mekhatronika, avtomatizatsiya, upravlenie. 2007, no. 7, pp. 14–17. (In Russ.).
14. Gorenskii B.M., Kiryakova O.V., Lapina L.A., Gron’ D.N. Level assessment of the improvement of technological conversion of heavy non-ferrous metal production by the methods of computer modeling. Zhurnal SFU. 2009, no. 4, pp. 434–445. (In Russ.).
15. Kiryakova О.V., Parshakov А.V., Gorenskii B.М., Ozerova Е.L. Komp’yuternyi trenazher “Affinazh platiny” [Computer simulator “Platinum affinage”]. Certificate of state registration of the program for computer no. 2010617794, publ. 24.11.2010. (In Russ.).
Review
For citations:
Kiryakova O.V., Lapina L.A., Kapustina S.V. ON THE APPROACH TO THE DEVELOPMENT OF INFORMATION CONTROL SYSTEM OF TECHNOLOGICAL METALLURGICAL OBJECTS. Izvestiya. Ferrous Metallurgy. 2016;59(4):271-277. (In Russ.) https://doi.org/10.17073/0368-0797-2016-4-271-277
Views:
641
Email this article 