DEVELOPMENT AND COMPARATIVE ANALYSIS OF MATHEMATICAL MODELS OF FORMING OF ELECTRODE PRODUCTION QUALITY AT BURNING
https://doi.org/10.17073/0368-0797-2016-3-197-203
Abstract
The main objective of the burning process of electrode products is getting burnt products with desired physical and mechanical properties. The authors have determined the mathematical dependences of forming of burnt products quality during their high-temperature heating, and have completed the identifi cation of these dependences on the basis of the experimental data. Adequate models allow us to study the formation processes of the electrode products quality for diff e rent temperature regimes and initial burning conditions, as well as to predict the quality levels of burned electrode products. The comparative analysis of statistical, deterministic and neural networks models to predict the quality of burnt electrode products was made.
About the Authors
S. V. Soshkin
SPC “Yugtsvetmetavtomatika”
Russian Federation
Russian Federation
Dr. Sci. (Eng.), Professor, Director,
Vladikavkaz
A. L. Rutkovskii
North Caucasian Institute of Mining and Metallurgy (State Technological
University), NCIMM (STU)
Russian Federation
Russian Federation
Dr. Sci. (Eng.), Professor of the Chair of the Theory and Automation of Metallurgical Processes and Furnaces,
Vladikavkaz
G. S. Soshkin
SPC “Yugtsvetmetavtomatika”
Russian Federation
Russian Federation
Cand. Sci. (Eng.), Deputy Head of Department of Scientific and Technical Developments and Deployments,
Vladikavkaz
E. I. Meshkov
North Caucasian Institute of Mining and Metallurgy (State Technological
University), NCIMM (STU)
Russian Federation
Russian Federation
Dr. Sci. (Eng.), Professor of the Chair of the Theory and Automation of Metallurgical Processes and Furnaces,
Vladikavkaz
M. A. Kovaleva
North Caucasian Institute of Mining and Metallurgy (State Technological
University), NCIMM (STU)
Russian Federation
Russian Federation
Cand. Sci. (Eng.), Professor of the Chair of the Theory and Automation of Metallurgical Processes and Furnaces,
Vladikavkaz
References
1. Jones, S.S, Hildebrandt, R. D., Kaiser M. C. Important factors affecting the performance of anode carbon composites for the production of aluminum. In: 14th Biennial conference on carbon, Extended Abstr. and Program, 25–29 June, 1979. American Carbon Society, Pennsylvania State University, pp. 81–90.
2. Lutkov A.I., Tkanova O.V., Bol’shakov Yu.L. Determination of thermal stresses and optimization of burning mode of carbon billets. Tsvetnye metally. 1990, no. 9, pp. 62–65. (In Russ.).
3. Severo D.S., Elton V.G., Pinto C.V. Advanced 3D Modelling For Anode Baking Furnaces. Light Metals (The Minerals, Metals & Materials Society). 2005, pp. 203–208.
4. Keller F., Sulger P., Meier M., Severo D., Gusberti V. Specific Energy Consumption in Anode Bake Furnaces. Light Metals. 2010, pp. 1005–1010.
5. Severo D., Sulger P., Keller F., Meier M. Recent Developments in Anode Baking Furnace Design. Light Metals. 2011, pp. 853–858.
6. Gerald F. Covanec. Century Aluminium of West Virginia, AIME. Light Metals. 2000, pp. 573–578.
7. Fisher W.K., Keller F., Perruchoud R.C., Oberdolz S. R&D Carbon, AIME. Light Metals. 1993, pp. 683–689.
8. Mannweiler U., Sulzberger P., Oberdolz S. R&D Carbon, AIME. Light Metals. 1991, pp. 635–639.
9. Oberdolz S., Muhlemann O. R&D Carbon, AIME. Light Metals. 1978, 315 p.
10. McClung M., Ross I.R., Chavanec G. Century Al of West Virginia, AIME. Light Metals. 2000, pp. 573–479.
11. Sannikov A.K. The control principle of formation of structure and properties of graphite electrodes. Tsvetnye metally. 1990, no. 9, pp. 58–62. (In Russ.)
12. Smirnova A.S., Ryss M.A., Dmitrieva G.V., Bazhenov N.A. The study of the kinetics of gas evolution and change of properties during burning of billets made at medium and high-temperature modes. Tsvetnye metally. 1965, no. 11, pp. 90–93. (In Russ.).
13. Sukhorukov I.F., Atamanskii A.I., Pavlovskii A.M. Optimal heating modes for electrode blanks of various diameters. Tsvetnaya metallurgiya. 1965, no. 20, pp. 51–58. (In Russ.).
14. Akaike H. A new look at the statistical model identifi cation. IEEE Transactions on Automatic Control. 1974, vol. 19, pp. 716–723.
15. Soshkin S.V., Fokin V.P., Rutkovskii A.L., Soshkin G.S. Mathematical modeling of quality indicators formation of electrode products during burning. Tsvetnaya metallurgiya. 2010, no. 12, pp. 33–39. (In Russ.).
16. Soshkin G.S., Rutkovskii A.L., Tsemekhman L.Sh., Sineva S.I., Soshkin S.V. Experimental studies and mathematical modeling of the thermal decomposition of carbon compositions. Tsvetnye metally. 2012, no. 2, pp. 42–47. (In Russ.).
17. Pomerantsev V.V. Osnovy prakticheskoi teorii goreniya [Basics of practical theory of combustion]. Leningrad: Energoatomizdat, 1986, 165 p. (In Russ.).
18. Soshkin S. V., Rutkovskii, A. L., Soshkin, G. S. Research and mathematical modeling of the pyrolysis process of electrode billets du ring burning. Tsvetnye metally. 2008, no. 2, pp. 108–110. (In Russ.).
19. Mkrtchyan S.O. Neirony i neironnye seti. Vvedenie v teoriyu formal’nykh neironov [Neurons and neural networks. Introduction to the theory of formal neurons]. Moscow: Energiya, 1971, 232 p. (In Russ.).
20. Salikhov Z.G., Rutkovskii, A.L., Soshkin, G.S., Soshkin, S.V. Forecasting network structure model development of burnt electrode products quality index for burning technology process programmed control. Izvestiya VUZov. Chernaya metallurgiya = Izvestiya. Ferrous Metallurgy. 2011, no. 1, pp. 54–60. (In Russ.).
Review
For citations:
Soshkin S.V., Rutkovskii A.L., Soshkin G.S., Meshkov E.I., Kovaleva M.A. DEVELOPMENT AND COMPARATIVE ANALYSIS OF MATHEMATICAL MODELS OF FORMING OF ELECTRODE PRODUCTION QUALITY AT BURNING. Izvestiya. Ferrous Metallurgy. 2016;59(3):197-203. (In Russ.) https://doi.org/10.17073/0368-0797-2016-3-197-203
Views:
634
Email this article 