CALCULATION OF PRELIMINARY BENDING OF STRIP DURING CUTTING BY SHEARS
https://doi.org/10.17073/0368-0797-2016-2-142-143
Abstract
The authors have developed the calculation method for the distance from the upper surface of the roller of fedding roll table to the upper surface of the roller of discharge roll table of the device for cutting of pre-curved stripes, proceeding from conditions of the band cutting force minimization in performing the requirements of its straightness after cutting.
About the Authors
A. G. Nikitin
Siberian State Industrial University, Novokuznetsk, Russia
Russian Federation
Russian Federation
Dr. Sci. (Eng.), Assist.Professor, Head of the Chair of Machinery and Technological Equipment
Yu A. Epifantsev
Siberian State Industrial University, Novokuznetsk, Russia
Russian Federation
Russian Federation
Cand. Sci. (Eng.), Assist. Professor of the Chair “Technical Mechanics and Graphics”
E. I. Demina
Siberian State Industrial University, Novokuznetsk, Russia
Russian Federation
Postgraduate of the Chair of Transport and Logistics
Russian Federation
Postgraduate of the Chair of Transport and Logistics
References
1. Mashiny i agregaty metallurgicheskikh zavodov. T. 3 [Machines and equipment for steel plants, vol.3]. Tselikov A.I. ed. Moscow: Metallurgiya. 1988, 680 p.(In Russ.).
2. Nikitin A.G., Belov E.G., Poltoratskii L.M. Ustroistvo dlya rezki prokata [A device for cutting of rolled products]. Patent RF no. 91911, Byulleten’ izobretenii. 2010, no. 7. (In Russ.).
3. Nikitin A.G., Epifantsev Yu.A., Demina E.I. The determination of cutting force on the scissors at pre-curved strip cutting. Izvestiya VUZov. Chernaya metallurgiya = Izvestiya. Ferrous Metallurgy. 2015, no. 5, pp. 386–387. (In Russ.).
4. Belyaev N.M. Soprotivlenie materialov [Strength of materials]. Moscow: Nauka. 1965. 312 p. (In Russ.).
5. Stepin P.A. Soprotivlenie materialov [Strength of materials]. St. Petersburg: Lan’, 2012, 320 p. (In Russ.).
6. Kratkii spravochnik metallista [Brief reference guide for metalworker]. Orlov P.N., Skorokhodov E.A. eds. Moscow: Mashinostroenie, 1986, 960 p. (In Russ.).
Review
For citations:
Nikitin A.G., Epifantsev Yu.A., Demina E.I. CALCULATION OF PRELIMINARY BENDING OF STRIP DURING CUTTING BY SHEARS. Izvestiya. Ferrous Metallurgy. 2016;59(2):142-143. (In Russ.) https://doi.org/10.17073/0368-0797-2016-2-142-143
Views:
631
Email this article 