CALCULATION METHOD OF THE ACTUAL SPOT SIZE OF SPRAY JET IRRIGATION ON THE HORIZONTAL SHEET SURFACE
https://doi.org/10.17073/0368-0797-2013-2-40-45
Abstract
Series of studies of the analytical model development of the spot geometry of spray jet irrigation on the flat surface is completed. The method of approximate calculation of gravity and environmental resistance for estimation of spot sizes of inclined jet irrigation, accumulating both on the top and the bottom surfaces of the horizontal sheet, is described. The results can be used for the design of installations and cooling technologies and quenching of hot metal sheets by spray liquid jets.
About the Authors
E. E. Beygelzimer
Научно-производственное общество «Доникс»
Ukraine
Ukraine
Ya. E. Beygelzimer
Донецкий национальный технический университет
Ukraine
Ukraine
References
1. Бейгельзимер Э.Е., Бейгельзимер Я.Е. // Изв. вуз. Черная металлургия. 2012. № 8. С. 32 – 36.
2. Бейгельзимер Э.Е., Бейгельзимер Я.Е. // Изв. вуз. Черная металлургия. 2012. № 6. С. 43 – 47.
Review
For citations:
Beygelzimer E.E., Beygelzimer Ya.E. CALCULATION METHOD OF THE ACTUAL SPOT SIZE OF SPRAY JET IRRIGATION ON THE HORIZONTAL SHEET SURFACE. Izvestiya. Ferrous Metallurgy. 2013;56(2):40-45. (In Russ.) https://doi.org/10.17073/0368-0797-2013-2-40-45
Views:
488
Email this article 