CONTROL INTELLECTUALIZATION DESIGN FOR PRODUCTION PROCESS PREPARATION OF SECTION MILL
https://doi.org/10.17073/0368-0797-2015-11-851-856
Abstract
An increase of production activity effi ciency of an enterprise can be reached by effi ciency increase of the management decisions making
process. Modern highly intellectual management systems are based on the principles of fuzzy logic and allow not only to process the large volumes of versatile and unstructured information, but also to make decisions quickly in conditions of invariance and insuffi ciency of data. Such systems usage and adaptation to real working conditions are main ways to increase the production effi ciency. The article describes the possibility of operational management system design. Such system is based on symbiosis between multi-level multi-agent systems and dynamic expert systems and is expected to be used for processes of section mill stand preparation and transfer, making and adjustment of the rolling plan under the conditions of interaction of all agents of a technological circuits.
About the Authors
A. Y. Eremenko
Stary Oskol Technological Institute of National University of Scien ce and Technology “MISiS” (42, Makarenko, Stary Oskol, Belgorod Region, 309516 Russia)
OJSC “Lebedinsky GOK” (Industrial Zone, Gubkin, Belgorod Region, 309516, Russia)
Russian Federation
Russian Federation
Cand. Sci. (Eng.), Assist. Professor of the Chair “Automation and Information Systems”, Leading Specialist of Department of Production Control Management
Y. A. Tsigankov
Stary Oskol Technological Institute of National University of Scien ce and Technology “MISiS” (42, Makarenko, Stary Oskol, Belgorod Region, 309516 Russia)
Russian Federation
Russian Federation
Postgraduate of the Chair “Automation and Information Systems”
References
1. Eremenko A.Yu. Intellectualization of operational management system of preparation process of breakdown stands at section rolling shop. In: Sovremennye problemy gorno-metallurgicheskogo kompleksa. Nauka i proizvodstvo. XI vserossiiskaya nauchno-prakticheskaya konferentsiya s mezhdunarodnym uchastiem [Modern problems of mining and smelting complex. Science and Production. XI All-Russian Scientifi c-Practical Conference with International Participation]. Vol. 1, Stary Oskol, 2014, pp. 178–185. (In Russ.).
2. Tsukanov M.A., Boeva L.M. Construction of contact schedule of complex structured discrete-continuous production using immune algorithm. Vestnik Voronezhskogo gosudarstvennogo tekhnicheskogo universiteta. 2012, vol. 8, no. 4, pp. 66–70. (In Russ.).
3. D’yachko A.G. Matematicheskoe i imitatsionnoe modelirovanie proizvodstvennykh sistem. Nauchnoe izdanie [Mathematical modeling and simulation of manufacturing systems]. Moscow: MISIS, 2007, 540 p. (In Russ.).
4. Verevkin S.V. Razrabotka i primenenie algoritmov proizvodstvennoi koordinatsii (na primere staleplavil’nogo kompleksa). Diss. … kand. tekhn. nauk [Development and application of industrial coordination algorithms (at the example of steel-smelting complex) Cand. Tech. Sci. Diss.]. Novokuznetsk, 2003, 227 p. (In Russ.).
5. Buslenko N.P. Modelirovanie slozhnykh system [Modeling of complex systems]. Moscow: Nauka, 1968, 355 p. (In Russ.).
6. Verevkin S.V. Formation of contact graph in the parallel-serial systems. In: Sb. nauch. tr. “Informatsionnye tekhnologii v ekonomike, promyshlennosti i obrazovanii” [Information technologies in economy, industry and education: Coll. of sci. papers]. Kemerovo: Izd-vo NFI KemGU, 2000, pp. 18–24. (In Russ.).
7. Min Liu, Zhi-jiang Sun. An adaptive annealing genetic algorithm for the job-shop planning and scheduling problem. Expert Systems with Applications, 2011, vol. 38(8), pp. 9248–9255.
8. Eremenko Yu.I., Poleshchenko D.A., Glushchenko A.I., Solodov S.V. The appliance effi ciency estimation of pid-regulator parameters of neural optimizer for solving of control problem of metallurgical heating plants. Izvestiya VUZov. Chernaya metallurgiya = Izvestiya. Ferrous Metallurgy. 2014, vol. 57, no. 7, pp. 61–65. (In Russ.).
9. Verevkin S.V. Formation of contact graph in the parallel-serial systems. In: Sb. nauch. tr. “Informatsionnye tekhnologii v ekonomike, promyshlennosti i obrazovanii” [Information technologies in economy, industry and education: Coll. of sci. papers]. Kemerovo: Izd-vo NFI KemGU, 2000, pp. 18–24. (In Russ.).
10. Tsukanov M.A., Boeva L.M. Modeling of technological coordination of steel plant equipment on the basis of the unit with enclosed Petri nets. Elektrotekhnicheskie kompleksy i sistemy upravleniya. 2010, no. 2 (18) , pp. 51–54. (In Russ.).
11. Leung C.W., Wong T.N. Integrated process planning and scheduling by an agent-based ant colony optimization. Computers & Industrial Engineering. 2010, no. 59, pp. 166–180.
12. Carlier J. The one-machine sequencing problem. European Journal of Operational Research, 1982. Vol. 11, pp. 42–47.
13. Tang L. etc. A review of planning and scheduling systems and methods for integrated steel production. European Journal of Operational Research, 2001. Vol. 133, no. 1, pp. 1–20.
14. Eremenko Yu.I. Issledovanie eff ektivnosti intellektual’nogo upravleniya v metallurgii. Diss. … kand. tekhn. nauk [Investigation of the effi ciency of intelligent control in metallurgy. Cand. Tech. Sci. Diss.]. Lipetsk: LGTU, 2005, 369 p. (In Russ.).
15. Control intellectualization design for production process preparation of section mill. In: “Obrazovanie, nauka, proizvodstvo i upravlenie”, Vserossiiskaya nauchn- prakticheskaya konferentsiya prepodavatelei, studentov i aspirantov s mezhdunarodnym uchastiem [“Education, science, production and management” All-Russian scientifi c and practical conference of tutors, students and graduate students with international participation]. 2012, pp. 180–185. (In Russ.).
Review
For citations:
Eremenko A.Y., Tsigankov Y.A. CONTROL INTELLECTUALIZATION DESIGN FOR PRODUCTION PROCESS PREPARATION OF SECTION MILL. Izvestiya. Ferrous Metallurgy. 2015;58(11):851-856. (In Russ.) https://doi.org/10.17073/0368-0797-2015-11-851-856
Views:
554
Email this article 