CALCULATION METHODS OF TENSIONS IN BURNT IRON-ORE PELLETS AT THEIR COOLING
https://doi.org/10.17073/0368-0797-2015-12-865-870
Abstract
The paper presents the calculation methods of burnt zonal fl uxed pellets at the basis of rising strained state at their cooling on the border of zones with diff erent temperature of crystallizalization of slag content. The calculations of strained state for Kachkanar pellets with diff erent disposition of hematite and magnetite zones were carried out. It was shown that cooling of the burnt zonal pellets in the air at the border of magnetite core and hematite shell–stretching radial tenses appear and they contribute to the loss of contact between the core and the shell. It was determined that the presence of the three-zonal structure of pellets (core–hematite shell–magnetite fi lm surface) contributes to re-distribution of normal tenses at their section. The increase of thickness of magnetite fi lm surface decreases stretching tenses in radial direction at the border of the core and the shell, in the result of which the strength of pellets rises. At cooling of burnt pellets with hematite core and magnetite shell in the neutral atmosphere at the border of zones stretching normal tenses appear in tangential direction, they contribute to the reduction of strength of pellets.
About the Authors
S. G. Melamud
Ural Federal University named after the fi rst President of Russia B.N. Yeltsin
Russian Federation
Russian Federation
Cand. Sci. (Eng.), Deputy Director of Training and Design Center «URFU Design Institute»,
19, Mira str., Ekaterinburg, 620002
B. P. Yur’ev
Ural Federal University named after the fi rst President of Russia B.N. Yeltsin
Russian Federation
Russian Federation
Cand. Sci. (Eng.), Аssist. Рrofessor of the Chair “Thermal Physics and Informatics in Metallurgy”,
19, Mira str., Ekaterinburg, 620002
References
1. Gorbachev V.A., Abzalov V.M., Yur’ev B.P. Crystal-chemical transformation of magnetite into hematite in iron-ore pellets. Izvestiya VUZov. Chernaya metallurgiya = Izvestiya. Ferrous Metallurgy. 2007, no. 4, pp. 27‒30. (In Russ.).
2. Plotnikov S.V., Bormotov A.S. Phase transformation mechanism at oxidation burning of industrial pellets, produced from iron quaztzite ores. Izvestiya VUZov. Chernaya metallurgiya = Izvestiya. Ferrous Metallurgy. 2011, no. 3, pp. 29‒32. (In Russ.).
3. Yur`ev B.P., Spirin N.A. Oxidation of iron-ore pellets. Steel in Translation. 2011, vol. 41, no. 5, pр. 400–403.
4. Malysheva T.Ya., Yusfi n Yu.S., Plotnikov S.V. Technological aspects of production of pellets from magnetite ore. Izvestiya VUZov. Chernaya metallurgiya = Izvestiya. Ferrous Metallurgy. 2011, no. 9, pp. 3‒5. (In Russ.).
5. Kokorin L.K., Leleko S.N. Proizvodstvo okislennykh okatyshei [Production of oxidized pellets]. Ekaterinburg: Ural’skii tsentr PF i reklamy “Marat”, 2004. 280 p. (In Russ.).
6. Egorov–Tismenko Yu.K. Kristallografi ya i kristallokhimiya [Crystallography and crystal chemistry]. Moscow: Izd-vo Knizhnyi dom “Universitet”, 2010. 588 p. (In Russ.).
7. Bulakh A.G., Zolotarev A.A., Krivovichev V.G. Obshchaya mineralogiya [General mineralogy]. Moscow: Akademiya, 2008. 360 p. (In Russ.).
8. Gorchakov G.I., Lifanov I.I., Terekhin L.N. Koeffi tsienty termicheskogo rasshireniya i temperaturnye deformatsii stroitel’nykh materialov [Coeffi cients of thermal expansion and temperature deformation of building materials]. Moscow: Izd-vo standartov, 1968. 167 p. (In Russ.).
9. Sidorov V.N. Soprotivlenie materialov [Strength of materials]. Moscow: Izd-vo Arkhitektura-S, 2013. 304 p. (In Russ.).
10. Gorshkov A.G., Starovoitov E.I., Tarlakovskii D.V. Teoriya uprugosti i plastichnosti [Theory of elasticity and plasticity]. Moscow: FIZMATLIT, 2002. 416 p. (In Russ.).
11. Ilyushin A.A. Plastichnost’. Uprugoplasticheskie deformatsii [Plasticity. Elastoplastic deformations]. Moscow: Logos, 2004. 388 p. (In Russ.).
12. Taira S., Otani R. Teoriya vysokotemperaturnoi prochnosti materialov [Theory of high-temperature material strength] Trans. from Jap. Moscow: Metallurgiya, 1986. 280 p. (In Russ.).
13. Radchenko V.P., Eremin Yu.A. Reologicheskoe deformirovanie i razrushenie materialov i elementov konstruktsii [Rheological deformation and destruction of materials and construction elements]. Moscow: Mashinostroenie–1, 2004. 265 p. (In Russ.).
14. Malkin A.Ya., Isaev A.I. Reologiya: kontseptsii, metody, prilozheniya [Rheology: conceptions, methods, applications]. Moscow: Professiya, 2007. 560 p. (In Russ.).
15. Melamud S.G., Yur’ev B.P. Strength change of iron-ore pellets in the process of thermal treatment and the ways of its increase. Stal’. 2014, no. 3, pp. 6–11. (In Russ.).
Review
For citations:
Melamud S.G., Yur’ev B.P. CALCULATION METHODS OF TENSIONS IN BURNT IRON-ORE PELLETS AT THEIR COOLING. Izvestiya. Ferrous Metallurgy. 2015;58(12):865-870. (In Russ.) https://doi.org/10.17073/0368-0797-2015-12-865-870
Views:
569
Email this article 