HOT PLASTIC DEFORMATION OF 08Cr21Ni5Ti STEEL
https://doi.org/10.17073/0368-0797-2015-10-740-743
Abstract
The paper presents the research results of the heterogeneity of hot
plastic deformation of 08Cr21Ni5Ti steel. Extension of samples was
carried out in the vacuum chamber of a testing machine IMASh-20-75 “Ala-Too”. To test the sample it was mounted in the vacuum chamber to the grippers with the help of bars. The junction of platinum – platinum-rhodium couple was welded to the side surface of the sample. The evacuation of air from the chamber was carried out up to a residual pressure of 5·10–5 mm Mercury (6.7·10–3 Pa). Heating of the sample up to 800 – 1200 °C was achieved by the heat from the current of industrial frequency transmitted through it. Accuracy of temperature regulation was ± 5 °C. The deformation of austenitic and ferritic phases was examined in dependence on the total degree of deformation of steel and temperature, the data about the infl uence of these factors on the intensity of slip at the interphase boundaries were also considered. The effect of the temperature on the ratio of hot microhardness of austenite and ferrite in 08Cr21Ni5Ti steel was investigated.
Keywords
About the Authors
M. V. Temlyantsev
Siberian State Industrial University (42, Kirova str., Novokuznetsk, Kemerovo Region, 654007, Russia)
Russian Federation
Russian Federation
Dr. Sci. (Eng.), Professor of the Chair “Thermal power and Ecology”, Vice-Rector for Research and Innovations
M. V. Filippova
Siberian State Industrial University (42, Kirova str., Novokuznetsk, Kemerovo Region, 654007, Russia)
Russian Federation
Russian Federation
Cand. Sci. (Eng.), Asist. Professor of the Chair “Metal Forming and Metal Science”. OJSC “EVRAZ ZSMK”
V. N. Peretyat’ko
Siberian State Industrial University (42, Kirova str., Novokuznetsk, Kemerovo Region, 654007, Russia)
Russian Federation
Russian Federation
Dr. Sci. (Eng.), Professor of the Chair “Metal Forming and Metal Science”. OJSC “EVRAZ ZSMK”
References
1. Belyakov L.N., Livshits B.G. Delta-ferrite in austenite-ferritic stainless steel. Izvestiya AN SSSR. OTN. Metallurgiya i toplivo. 1961, no. 5, pp. 90‒95. (In Russ.).
2. Honeycombe R.W.K. The plastic deformation of metals. Edward Arnold ltd., 2nd ed. 1984, 483 p. (Russ.ed.: Honeycombe R. Plasticheskaya deformatsiya metallov. Moscow: Mir, 1972. 408 p.).
3. Gean-Paul Poirier. Plasticite a haute temperature des solides eristallins. Paris, 1976 (Russ.ed.: Poirier G.P. Vysokotemperaturnaya plastichnost’ kristallicheskikh tel. Moscow: Metallurgiya, 1982. 272 p.).
4. Gur’ev A.V., Teplitskii M.Sh. Microstructure peculiarities of superplastic deformation of ingot iron at thermal cycling under loading. In.: Praktika teplovoi mikroskopii [Practice of thermal microscopy]. Moscow: Nauka, 1976, pp. 102‒107. (In Russ.).
5. Temlyantsev M.V., Filippova M.V., Peretyat’ko V.N., Kono valov S.V. Inhomogeneity of the hot deformation of austenitic steel. Steel in Translation. 2014, Vol. 44, no. 4, pp. 255‒257.
6. Temlyantsev M.V., Filippova M.V., Peretyat’ko V.N., Konovalov S.V. Nonuniformity of 08CR18NI10TI steel hot deformation. In.: External fi elds processing and treatment technology and preparation of nanostructure of metals and alloys: Russian-China international workshop. Novokuznetsk: SibGIU, 2014, pp. 224–230.
7. Lozinskii M.G. Teplovaya mikroskopiya materialov [Thermal microscopy of the materials]. Moscow: Metallurgiya, 1976. 304 p. (In Russ.).
8. Lozinskii M.G., Tananov A.I. Teplovaya mikroskopiya metallicheskikh materialov [Thermal microscopy of metallic materials]. Moscow: Znanie, 1973. 44 p. (In Russ.).
9. Grigorovich V.K. Tverdost’ i mikrotverdost’ metallov [Hardness and micro-hardness of metals]. Moscow: Nauka, 1976. 230 p. (In Russ.).
10. Dedenko L.G., Kerzhentsev V.V. Matematicheskaya obrabotka i oformlenie rezul’tatov eksperimenta [Mathematical treatment and the presentation of the experimental results]. Moscow: MGU, 1977. 112 p. (In Russ.).
Review
For citations:
Temlyantsev M.V., Filippova M.V., Peretyat’ko V.N. HOT PLASTIC DEFORMATION OF 08Cr21Ni5Ti STEEL. Izvestiya. Ferrous Metallurgy. 2015;58(10):740-743. (In Russ.) https://doi.org/10.17073/0368-0797-2015-10-740-743
Views:
786
Email this article 