DEVELOPMENT OF THE CAM SYSTEM SOFTWARE AT BLAST FURNACE PLANT
https://doi.org/10.17073/0368-0797-2015-9-703-709
Abstract
The requirements, structure and architecture of an automated workplace «The technologist of domain shop», computer system of support of decision-making of the MES-level, introduced in CAM system at blast furnace plant of OJSC «Magnitogorsk Iron and Steel Work» are considered. The short description of the basic modeling subsystems, and also the assumptions accepted in the course of mathematical modeling is presented. The use of the developed system allows the engineering-technological personnel operatively to carry out the analysis of industrial situations of blast-furnace shop, to decide a number of technological problems of management of thermal, gas dynamic and slag modes of blast-furnace smelting, and also to make calculation of optimum structure iron-ore materials, that finally provides the increase of technical and economic indicators of work of blast-furnace manufacture.
About the Authors
V. V. Lavrov
Ural Federal University named after the first President of Russia B.N. Yeltsin
Russian Federation
Russian Federation
Dr. Sci. (Eng.), Professor of the Chair “Thermal Physics and Informatics in Metallurgy”,
19, Mira str., Ekaterinburg, 620002
N. A. Spirin
Ural Federal University named after the first President of Russia B.N. Yeltsin
Russian Federation
Russian Federation
Spirin N.A.1 , Dr. Sci. (Eng.), Professor, Head of the Chair “Thermal Physics and Informatics in Metallurgy”,
19, Mira str., Ekaterinburg, 620002, Russia)
A. A. Burykin
Ural Federal University named after the first President of Russia B.N. Yeltsin
Russian Federation
Russian Federation
Burykin A.A.1 , Cand. Sci. (Eng.), Assist. Professor of the Chair “Thermal Physics and Informatics in Metallurgy”,
19, Mira str., Ekaterinburg, 620002, Russia)
K. A. Shchipanov
Ural Federal University named after the first President of Russia B.N. Yeltsin
Russian Federation
Russian Federation
Cand. Sci. (Eng.), Assist. Professor of the Chair “Thermal Physics and Informatics in Metallurgy”,
19, Mira str., Ekaterinburg, 620002, Russia)
V. Y. Rybolovlev
JSC “Magnitogorsk Metallurgical Plant”
Russian Federation
Russian Federation
Cand. Sci. (Eng.), Chief of Design office,
93, Kirova str., Magnitogorsk, Chelyabinsk Region
References
1. Spirin N.A., Lavrov V.V., Rybolovlev V.Yu., Krasnobaev A.V., Onorin O.P., Kosachenko I.E. Model’nye sistemy podderzhki prinyatiya reshenii v ASU TP domennoi plavki metallurgii [Model support entity of decision-making in automatic process control system of blast-furnace metallurgy]. Ekaterinburg: UrFU, 2011. 462 p. (In Russ.).
2. Onorin О.P., Spirin N.А., Terent’ev V.L. etc. Komp’yuternye metody modelirovaniya domennogo protsessa [Computer modeling techniques blast furnace process]. Ekaterinburg: izd. UGTU–UPI, 2005. 301 p. (In Russ.).
3. Feng Q., Wang L. Blast furnace hoist charging control system based on ActiveX technology. WIT Transactions on Information and Communication Technologies; Wuhan; China; 7 May 2013 through 8 May 2013. Vol. 46 V. 2, 2014, pp. 1853–1858.
4. Dimitrov B.H., Nenov H.B., Marinov A.S. Comparative analysis between methodologies and their software realizations applied tomodeling and simulation of industrial thermal processes. 36th International Convention on Information and Communication Technology, Electronics and Microelectronics, MIPRO 2013; Opatija; Croatia; 20 May 2013 through 24 May 2013. Article number 6596383, pp. 891–895.
5. New process-control computer-system for the blast-furnace plant of an integrated iron and steel works / Bartels R., Dohl Kw., Uhde H., Schroder A., Stumpe W. Stahl Und Eisen. 1994. Vol. 114. Issue 6, pp. 75–79.
6. Odintsov I.O. Professional’noe programmirovanie. Sistemnyi podkhod [Professional programming. System approach]. St. Peterburg: BHV-Peterburg, 2004. 624 p. (In Russ.).
7. Troelsen Andrew. Pro C# 5.0 and the .NET 4.5 framework. 6th edition, Apress, 2012, 1560 p. (Russ.ed.: Troelsen A. Yazyk programmirovaniya C# 5.0 i platforma .NET 4.5. 6-e izd., per. s angl. Moscow: OOO “I.D. Vil’yams”, 2013. 1311 p.).
8. Date C.J. Introduction to Database Systems. Addison-Wesley, 2004, 1024 p. (Russ.ed.: Date C.J. Vvedenie v sistemy baz dannykh. Moscow: Vil’yams, 2006. 1328 p.).
9. Spirin N. A., Lavrov V. V., Burykin A. A., Rybolovlev V. Yu., Krasnobaev A. V., Kosachenko I. E. Complex of model systems for supporting decisions made in managing blast-furnace smelting technology. Metallurgist, 2011, Vol. 54, no. 9–10, pp. 566–569.
10. Spirin N.A., Lavrov V.V., Rybolovlev V.Yu. etc. Matematicheskoe modelirovanie metallurgicheskikh protsessov v ASU TP: uchebnoe posobie [Mathematical modeling of metallurgical processes in ACS: Manual]. Spirin N.A. ed. Ekaterinburg: UrFU, 2014, 558 p. (In Russ.).
Review
For citations:
Lavrov V.V., Spirin N.A., Burykin A.A., Shchipanov K.A., Rybolovlev V.Y. DEVELOPMENT OF THE CAM SYSTEM SOFTWARE AT BLAST FURNACE PLANT. Izvestiya. Ferrous Metallurgy. 2015;58(9):703-709. (In Russ.) https://doi.org/10.17073/0368-0797-2015-9-703-709
Views:
520
Email this article 