CREATING A MODEL OF VOLTAGE CONTROL IN VACUUM ARC FURNACE. Report 2
https://doi.org/10.17073/0368-0797-2015-6-444-447
Abstract
The experimental studies of voltage control were performed on the vacuum arc furnace DVS-3.2-G1 of JSC “Metallurgical Plant” Electrostal”. Using the obtained coefficients the simulation model of voltage control was developed for the vacuum arc furnace. The simulation results of furnace voltage with a drip closures for 5th hour remelting are considered. The authors established the closeness of developed management model with the real object. The article describes the comparison with other studies on stress management for vacuum arc furnaces. It was concluded that the developed model can then be used as a model for the construction of the control system of the vacuum arc furnace.
About the Authors
A. G. Aleksandrov
V.A. Trapeznikov Institute of Control Sciences of Russian Academy of Sciences
Russian Federation
Dr. Sci. (Phys.–Math.), Professor, Leading Researcher
Russian Federation
Dr. Sci. (Phys.–Math.), Professor, Leading Researcher
P. A. Livatkin
V.A. Trapeznikov Institute of Control Sciences of Russian Academy of Sciences;
Metallurgical Plant ”Electrostal”
Russian Federation
Master of Shop Repairing, Postgraduate
Russian Federation
Master of Shop Repairing, Postgraduate
K. A. Polozhentsev
Metallurgical Plant ”Electrostal”;
National University of Science and Technology “MISIS”
Russian Federation
Leading Master of Shop Repairing, Postgraduate of STI MISiS
Russian Federation
Leading Master of Shop Repairing, Postgraduate of STI MISiS
References
1. SIEMENS SIEMATIC. Sistemnoe PO dlya sistem S7-300/400 i standartnye funktsii: Rukovodstvo [System software for systems S7-300 / 400 and standard functions: Manual]. Vol. 2/2. A5E00739858-01, pp. 27-1 – 27-30. (In Russ.).
2. Lapshin I.V. Avtomatizatsiya dugovykh pechei [Automation of arc furnaces]. Moscow: Izdatel’stvo MGU, 2004, 165 p. (In Russ.).
3. Mikhailov O.P. Avtomatizirovannyi elektroprivod stankov i promyshlennykh robotov [Automated electric drive of machines and industrial robots ]. Moscow: Mashinostroenie, 1990, 304 p. (In Russ.).
4. Tashkinov A.Yu. Razrabotka matematicheskikh modelei i algoritmov i ikh primenenie dlya issledovaniya i usovershenstvovaniya protsessov vakuumnogo dugovogo pereplava: Avtoref. dis. … kand. tekhn. nauk [Development of mathematical models and algorithms and their application to research and process improvement of vacuum arc remelting. Cand. Tech. Sci. diss.]. Ekaterinburg, 2003. 21 p. (In Russ.).
5. Nekhamin I.S. Razrabotka sistemy upravleniya dugovoi pech’yu postoyannogo toka: Avtoref. dis. … kand. tekhn. nauk [Development of control system of the arc furnace DC. Cand. Tech. Sci. diss.]. Moscow: 2009. 20 p. (In Russ.).
6. Fomin A.V. Creating a simulation model of the electric arc furnace. Izvestiya tul’skogo gosudarstvennogo universiteta. Tekhnicheskie nauki. 2009, no. 3, pp. 315–321. (In Russ.).
7. Polozhentsev K.A., Livatkin P.A., Aleksandrov A.G. Creating a model of voltage control in vacuum arc furnace. Report 1. Izvestiya VUZov. Chernaya metallurgiya = Izvestiya. Ferrous Metallurgy. 2015, no. 3, pp. 203–206. (In Russ.).
8. Zanner F.J., Williamson R.L., Harrison R.P., Flanders H.D., Thompson R.D. and Szeto W.C. Superalloy 718-Metallurgy and Applications Edited by Loria E.A., The Minerals, Metals & Materials Society, 1989, pp. 17–32. (In Russ.).
Review
For citations:
Aleksandrov A.G., Livatkin P.A., Polozhentsev K.A. CREATING A MODEL OF VOLTAGE CONTROL IN VACUUM ARC FURNACE. Report 2. Izvestiya. Ferrous Metallurgy. 2015;58(6):444-447. (In Russ.) https://doi.org/10.17073/0368-0797-2015-6-444-447
Views:
746
Email this article 